喷管气流反推技术在改善机枪射击精度中的应用

doi:10.3969/j.issn.1000-1093.2015.12.005

兵工学报 ›› 2015, Vol. 36 ›› Issue (12): 2241-2246.doi: 10.3969/j.issn.1000-1093.2015.12.005

喷管气流反推技术在改善机枪射击精度中的应用

华洪良，廖振强，宋杰，邱明，肖俊波

（南京理工大学机械工程学院，江苏南京 210094）

收稿日期:2014-12-29 修回日期:2014-12-29 上线日期:2016-02-02
作者简介:华洪良（1990—），男，博士研究生
基金资助:
国家自然科学基金项目（51375241、51376090）

The Application of Reverse Jet Gas Technology in Improving Firing Accuracy of a Machine Gun System

HUA Hong-liang， LIAO Zhen-qiang， SONG Jie， QIU Ming， XIAO Jun-bo

（School of Mechanical Engineering， Nanjing University of Science and Technology， Nanjing 210094， Jiangsu， China）

Received:2014-12-29 Revised:2014-12-29 Online:2016-02-02

摘要/Abstract

摘要： 为了改善机枪系统射击精度，将喷管气流反推技术应用于某12.7 mm重机枪系统，在枪管不同位置设计喷管，并设计了3种喷管工作方案进行比较。根据相关实验数据，建立了准确的机枪系统刚柔耦合动力学模型并进行计算，获得了弹头出膛口瞬时膛口响应。根据外弹道理论，对射击距离100 m弹头散布进行计算，对比了不同喷管作用形式对机枪系统射击精度的改善情况。研究结果表明：喷管以力矩形式作用于枪管时，弹头出膛口瞬时高低方向位移、射角、速度扰动波动小，射向一致性高，对应的散布圆半径R₅₀改善72.3%左右，可有效改善机枪系统射击精度。

关键词: 兵器科学与技术, 射击精度, 喷管, 刚柔耦合动力学, 振动, 机枪系统

Abstract: The reverse jet gas technology is proposed to improve the firing accuracy of a 12.7 mm heavy machine gun system. The nozzles are designed at the different positions of the gun barrel, and 3 operating modes of nozzles are then designed for comparison. An accurate rigid-flexible coupling multi-body model of the machine gun system is then established based on related experimental data，and the muzzle dynamic responses are obtained through dynamic simulation. Based on the exterior ballistic theory and the boundary conditions, the bullet dispersions are obtained with a firing distance of 100 m, and the improved conditions of the firing accuracy of the machine gun system are compared. The results show that the initial displacement, firing angle and velocity are stable with little fluctuation when the nozzle thrusts form a moment. The radius of 50% scattered circle is decreased by about 72.3%. The reverse jet gas technology can effectively improve the firing accuracy of the machine gun system.

Key words: ordnance science and technology, firing accuracy, nozzle, rigid-flexible coupling dynamics, vibration, machine gun system

中图分类号:

TJ25

华洪良，廖振强，宋杰，邱明，肖俊波. 喷管气流反推技术在改善机枪射击精度中的应用[J]. 兵工学报, 2015, 36(12): 2241-2246.

HUA Hong-liang， LIAO Zhen-qiang， SONG Jie， QIU Ming， XIAO Jun-bo. The Application of Reverse Jet Gas Technology in Improving Firing Accuracy of a Machine Gun System[J]. Acta Armamentarii, 2015, 36(12): 2241-2246.

参考文献

［1］王瑞林. 大口径机枪动力学特性与射击精度研究[D]. 南京：南京理工大学, 2003.
WANG Rui-lin. The researches on dynamic characteristics and firing accuracy of large caliber machine gun[D]. Nanjing: Nanjing University of Science and Technology, 2003.(in Chinese)
[2] 廖振强, 王涛, 余世海. 武器气体动力学数值计算方法[M]. 北京:国防工业出版社, 2005:221-228.
LIAO Zhen-qiang, WANG Tao, YU Shi-hai. Numerical computaion methode of weapon pneumodynamics[M].Beijing：National Defense Industry Press, 2005:221-228.(in Chinese)
[3] 唐亚鸣, 廖振强, 王晖,等. 新型内能源转管武器驱动技术研究[J]. 兵工学报, 2002, 23(2):273-275.
TANG Ya-ming, LIAO Zhen-qiang, WANG Hui, et al. A novel driving scheme for self-powered revolving guns [J]. Acta Armamentarii, 2002, 23(2):273-275.(in Chinese)
[4] 韩铁, 袁志华, 马坤鹏,等. 一种内能源转管武器射控装置设计[J]. 沈阳理工大学学报, 2014, 33(1):77-80,86.
HAN Tie, YUAN Zhi-hua, MA Kun-peng, et al. Design a mechanism to control the burst firing for own energy spin tube gun [J]. Transactions of Shenyang Ligong University, 2014, 33(1):77-80,86.(in Chinese)
[5] 廖振强, 耿光有, 卜雄洙,等. 内能源转管机枪首发起动过程数值模拟[J]. 南京理工大学学报：自然科学版, 2001, 25(3): 229-233.
LIAO Zhen-qiang, GENG You-guang, BU Xiong-zhu, et al. Numerical simulation of theinitial driving process of the self-energizing catling gun[J]. Journal of Nanjing University of Science and Technology: Natural Science, 2001, 25(3):229-233.(in Chinese)
[6] 李佳圣, 廖振强, 李洪强,等. 三脚架支承转管机枪射击密集度仿真[J]. 南京理工大学学报：自然科学版, 2013, 37(2):209- 214.
LI Jia-sheng, LIAO Zhen-qiang, LI Hong-qiang, et al. Simulation of fire density of gatling gun shooting on light tripod[J]. Journal of Nanjing University of Science and Technology：Natural Science, 2013, 37(2):209-214.(in Chinese)
[7] 李佳圣, 廖振强, 宋杰,等. 膛口制退效能对转管机枪射击密集度影响研究[J]. 兵工学报, 2013, 34(10):1215-1220.
LI Jia-sheng, LIAO Zhen-qiang, SONG Jie, et al. Research on influence of muzzle brake efficiency on firing density of gatling gun[J]. Acta Armamentarii, 2013, 34(10):1215-1220.(in Chinese)
[8] 陈锦喜, 王瑞林, 李永建,等. 机枪枪架结构改进及其动力学特性分析[J]. 机械设计, 2012, 29(7):74-76.
CHEN Jin-xi, WANG Rui-lin, LI Yong-jian, et al. Gun tripod improvement and its dynamic characteristics analysis[J]. Journal of Machine Design, 2012, 29(7):74-76.(in Chinese)
[9] 陈锦喜, 王瑞林, 吴海锋,等. 新型机枪枪架及其动态特性分析[J]. 振动与冲击, 2012, 31(8):121-123,129.
CHEN Jin-xi, WANG Rui-lin, WU Hai-feng, et al. Dynamic characteristics analysis for a new type gun tripod[J]. Journal of Vibration and Shock, 2012, 31(8):121-123,129.(in Chinese)
[10] 张小兵. 枪炮内弹道学[M]. 北京:北京理工大学出版社, 2014.
ZHANG Xiao-bing. Interior ballistics of guns[M]. Beijing: Beijing Institute of Technology Press, 2014.(in Chinese)
[11] 王永娟, 王亚平, 徐诚,等. 步兵自动武器现代设计理论与方法[M]. 北京：国防工业出版社, 2014.
WANG Yong-juan, WANG Ya-ping, XU Cheng, et al. Modern design theory and method of infantry automatic weapon[M]. Beijing: National Defense Industry Press,2014.(in Chinese)
[12] 王中原, 周卫平. 外弹道设计理论与方法[M]. 北京:科学出版社, 2004.
WANG Zhong-yuan, ZHOU Wei-ping. Design theory and method of exterior ballistics[M].Beijing:Science Press,2004.(in Chinese)

[1]	代程, 曹岩枫, 何龙, 徐诚. 典型小口径自动步枪热散形成原因分析与结果预估[J]. 兵工学报, 2024, 45(3): 885-892.
[2]	刘扬, 秦国华, 吴竹溪, 娄维达, 赖晓春. 基于工件振动和刀具结构的周铣表面形貌分析与预测[J]. 兵工学报, 2023, 44(7): 2132-2146.
[3]	杨硕, 杜天玮, 张晓鹏, 马梁, 张桂昌. 外物损伤对叶片振动疲劳裂纹扩展性能的影响[J]. 兵工学报, 2023, 44(6): 1713-1721.
[4]	林圣业, 王茂森, 谢杨杨, 李勇, 戴劲松. 梁弯曲振动的键合空间表示及其在炮口扰动分析中的应用[J]. 兵工学报, 2023, 44(6): 1775-1783.
[5]	曾根, 马长军, 庞大千, 李同辉, 张楠. 机电复合传动高线速转子-行星齿轮系统耦合振动特性[J]. 兵工学报, 2023, 44(1): 156-164.
[6]	黄陈磊, 蒋明飞, 陈莉, 李忠新, 吴志林. 热身管下小口径枪弹弹头壳材料对其膛内运动的影响规律[J]. 兵工学报, 2022, 43(9): 2241-2251.
[7]	刘宇航，刘鑫，张生，李洪彪. 重载车辆进气中冷管振动特性及设计改进[J]. 兵工学报, 2022, 43(8): 1753-1762.
[8]	周伯俊, 于传强，刘志浩，柯冰. 基于高压储能的特种车辆快速起竖技术与验证[J]. 兵工学报, 2022, 43(7): 1488-1497.
[9]	高月光，冯顺山，刘云辉，黄岐. 不同端盖厚度的圆柱形装药壳体破片初速分布[J]. 兵工学报, 2022, 43(7): 1527-1536.
[10]	康杨，李宁，黄孝龙，翁春生. 基于环形喷管的脉冲爆轰发动机爆轰声波声学特性[J]. 兵工学报, 2022, 43(5): 1075-1082.
[11]	赵文辉，孙晓恒，张伟东，郑鹏，杨帆. 四旋翼飞行器齿轮箱-支臂组件动态特性分析[J]. 兵工学报, 2022, 43(5): 1175-1184.
[12]	杨书仪，廖力力，覃凌云，戴巨川，陈哲吾，何兴云，仝宁可. 基于传感布置优化的履带车辆振动测试系统[J]. 兵工学报, 2022, 43(12): 2989-2999.
[13]	董香龙，郑雷，韦文东，吕冬明，朱卓志，徐苏柏，秦鹏. SiC/GFRP叠层复合装甲旋转超声孔加工轴向力与制孔质量研究[J]. 兵工学报, 2022, 43(10): 2631-2639.
[14]	杨蔚原，胡俊奇. 振动测试中低频失真放大问题的机理[J]. 兵工学报, 2022, 43(10): 2679-2686.
[15]	丁树奎，王良明，杨志伟，丁旭冉. 远程火炮弹丸起始扰动的动力学特性[J]. 兵工学报, 2021, 42(4): 673-683.

喷管气流反推技术在改善机枪射击精度中的应用

The Application of Reverse Jet Gas Technology in Improving Firing Accuracy of a Machine Gun System

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价