|
|||||
|
|
| 树形微通道热沉仿生建模及三维热流特性数值分析 | |
| 引用本文： | 徐尚龙,郭宗坤,秦杰,蔡奇彧,胡广新,王伟杰. 树形微通道热沉仿生建模及三维热流特性数值分析[J]. 中国机械工程, 2014, 25(9): 1185-1188 |
| 作者姓名： | 徐尚龙 郭宗坤 秦杰 蔡奇彧 胡广新 王伟杰 |
| 作者单位： | 电子科技大学,成都,610054 |
| 基金项目： | 国家自然科学基金资助项目(51176025) |
| 摘 要： | 对几种典型树叶进行参数测量,获得了各级叶脉直径、交角值及直径比例关系,在此基础上建立了树形微通道热沉的CAD模型,并对不同分形级数的双层微通道系统内的温度和流动特性分布进行了数值分析。结果表明,树形微通道具有更好的均温性,7级分形的树形微通道与6级和8级分形的树形微通道相比,所冷却芯片的温度更低,压降更小,具有更好的冷却效果。 |
| 关 键 词： | 微通道 压降 传热 流动 |
Three Dimensional Numerical Simulation of Fluid Flow and Heat Transfer in Tree-shaped Microchannels |
|
| Xu Shanglong,Guo Zongkun,Qin Jie,Cai Qiyu,Hu Guangxin,Wang Weijie. Three Dimensional Numerical Simulation of Fluid Flow and Heat Transfer in Tree-shaped Microchannels[J]. China Mechanical Engineering, 2014, 25(9): 1185-1188 | |
| Authors: | Xu Shanglong Guo Zongkun Qin Jie Cai Qiyu Hu Guangxin Wang Weijie |
| Affiliation: | University of Electronic Science and Technology of China,Chengdu,610054 |
| Abstract: | The microstructures of several typical leaves were measured and analyzed to get the diameter, angle and diameter ratio for each levels of leaf vein. The CAD model and simulation of heat and flow in a two-layer dendritic microchannel network for chips cooling were conducted. The simulation results show that the temperature distribution is more uniform in the tree-like microchannel than that in the paralell microchannel. The temperature and pressure drop are lower in the tree-like microchannel with 7 level branches than that with 6 and 8 level branches. |
| Keywords: | microchannel pressure drop heat transfer flow |
| 本文献已被 CNKI 等数据库收录！ | |
| 点击此处可从《中国机械工程》浏览原始摘要信息 | |
| 点击此处可从《中国机械工程》下载免费的PDF全文 | |