首页 | 官方网站   微博 | 高级检索  
     

一种核电核岛主设备用镍基焊丝的研制
引用本文:莫文林,陆善平,李殿中,李依依.一种核电核岛主设备用镍基焊丝的研制[J].焊接学报,2014,35(6):90-94.
作者姓名:莫文林  陆善平  李殿中  李依依
作者单位:中国科学院金属研究所沈阳材料科学国家联合实验室, 沈阳 110016
基金项目:中国科学院重点部署项目(KGZD-EW-XXX-2)
摘    要:通过试验分析了核电核岛主设备用镍基焊丝中各元素对焊丝和焊缝熔敷金属性能的影响.结果表明,随着焊丝中Al,Ti,Mn,Nb元素含量的增加,焊丝的强度、硬度及焊缝金属的抗拉强度增加;随着焊丝中Al,Ti,Nb元素含量的增加,室温焊缝熔敷金属的冲击吸收功增加;随着焊丝中Mn元素含量的增加,焊缝熔敷金属的冲击吸收功降低.通过调整焊丝成分得到了符合核电核岛主设备使用要求的焊缝熔敷金属.

关 键 词:核岛主设备    焊丝    拉伸性能    冲击性能    弯曲性能
收稿时间:2013/1/28 0:00:00

Research and development of Ni-based filler wire for key components of nuclear power plant
MO Wenlin,LU Shanping,LI Dianzhong and LI Yiyi.Research and development of Ni-based filler wire for key components of nuclear power plant[J].Transactions of The China Welding Institution,2014,35(6):90-94.
Authors:MO Wenlin  LU Shanping  LI Dianzhong and LI Yiyi
Affiliation:Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
Abstract:The effect of filler wire composition on the mechanical properties of filler wire and weld metal was studied. The results show that when, Ti,Mn and Nb contents increased in the filler wire, the tensile strength and hardness of the filler wire and weld metal increased. The impact energy of the weld metal increased with the increase of Al, Ti and Nb contents in the filler wire. But when Mn content increased in the filler wire, the impact energy of the weld metal decreased. By adjusting the composition of the filler wire,the weld metal could meet the requirements for the key components of nuclear power plant.
Keywords:key components of nuclear power plant  filler wire  tensile property  impact property  bending property
本文献已被 CNKI 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号