| X90管线钢管埋弧焊缝组织与性能分析 |
| |
| 引用本文： | 毕宗岳,杨军,牛辉,黄晓江.X90管线钢管埋弧焊缝组织与性能分析[J].焊接学报,2018,39(10):35-40. |
| |
| 作者姓名： | 毕宗岳 杨军 牛辉 黄晓江 |
| |
| 摘 要： | X90管线钢管是目前正在研究开发的一种新型高强度管线钢管. 随着管材强度的提高，焊缝的组织与性能成为研究与控制的关键. 文中对焊缝、热影响区(HAZ)和母材微观组织、晶粒取向、大/小角度晶界占比及冲击断口形貌等进行了分析研究. 结果表明，焊缝试样近断口区组织为针状铁素体(AF)+准多边形铁素体(QPF)，M-A组元呈楔形、块状和条带状，分布于相界处，尺寸较大，长1.8 μm，宽0.5 μm，组织有效平均晶粒尺寸为3.12 μm，大角度晶界比例为67.15%；而HAZ试样近断口区组织为粒状贝氏体(GB)+多形态M-A组元，晶粒粗大，M-A组元多以条带状、楔形分布于晶界和晶内，组织有效平均晶粒尺寸为4.52 μm，大角度晶界比例为85.95%. 母材试样近断口区组织是以细小AF+QPF+板条贝氏体(LB)+少量M-A组元为主的多相匹配的复相组织，M-A组元尺寸细小，组织有效平均晶粒尺寸为2.1 μm，大角度晶界比例为93.75%.密集分布的大尺寸M-A组元和大角晶界占比较小是导致焊缝冲击韧性低于母材的重要原因.
|
| 关 键 词： | X90管线钢|冲击韧性|焊接接头|针状铁素体 |
| 收稿时间： | 2017/5/15 0:00:00 |
Impact toughness of base metal and welded joints of X90 high-strength pipeline steel |
| |
| BI Zongyue,YANG Jun,NIU Hui,HUANG Xiaojiang.Impact toughness of base metal and welded joints of X90 high-strength pipeline steel[J].Transactions of The China Welding Institution,2018,39(10):35-40. |
| |
| Authors: | BI Zongyue YANG Jun NIU Hui HUANG Xiaojiang |
| |
| Abstract: | X90 pipeline steel pipe is a new type of high strength pipeline steel pipe being researched and developed. With the increase of pipe strength, the structure and properties of submerged arc welding seam become the key of research and control. The impact toughness in low temperature, fracture morphology, microstructure characteristics, grain orientation and percentage of large/small angle grain boundaries of weld seam, heat affected zone (HAZ) and base metal in X90 steel grade spiral submerged arc welded pipe manufacture were investigated by OM, SEM, TEM, EBSD and Charpy impact experiments. The results indicate that the microstructure near fracture zone of weld seam specimen was composed of acicular ferrite(AF) and quasi-polygonal ferrite (QPF). The form of M-A constituents shows diversity, sharp-angled clearly and the size increased as length×width =1.8 μm×0.5 μm. The values of average grain size was 3.12 μm and the proportion of large-angle grain boundaries was 67.15%. The microstructure near fracture zone of HAZ specimen was composed of granular bainite (GB) and multi-morphological M-A constituents, the M-A constituents in the grain boundary and crystal. The values of average grain size was 4.52 μm and the proportion of large-angle grain boundaries was 85.95%. The microstructure near fracture zone of base metal specimen was composed of fine AF, fine QPF, lath bainite (LB) and a small fine granular M-A (martenite/austenite) structure. The values of average grain size was 2.1 μm and the proportion of large-angle grain boundaries was 93.75%. Concentrated distribution of large size M-A constituents and the relatively small proportion of large-angle grain boundaries were the main reason for the poor impact toughness of weld. |
| |
| Keywords: | X90 pipeline steel|impact toughness|welded joints|acicular ferrite |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
