| 细化无碳化物贝氏体无缝钢管组织的热处理工艺 |
| |
| 引用本文： | 程巨强.细化无碳化物贝氏体无缝钢管组织的热处理工艺[J].金属热处理,2022,47(10):119-123. |
| |
| 作者姓名： | 程巨强 |
| |
| 作者单位： | 西安工业大学 材料与化工学院, 陕西 西安 710021 |
| |
| 摘 要： | 研究了不同热处理工艺下无碳化物贝氏体无缝钢管的显微组织和力学性能。结果表明,热轧态无碳化物贝氏体无缝钢管的组织粗大,强度较高,韧性很低。热轧+低温回火后韧性的提高幅度不大,仍然较低。热轧+正火+低温回火可以改善无碳化物贝氏体无缝钢管的韧性,但仍存在部分粗大的组织。热轧后先长时间高温回火(690 ℃×300 min),再正火和低温回火可以细化无碳化物贝氏体无缝钢管的组织,消除组织遗传性,大幅度提高韧性,冲击断裂特征由脆性断裂转变为韧性断裂。
|
| 关 键 词： | 无碳化物贝氏体钢 无缝钢管 组织细化 热处理工艺 |
| 收稿时间： | 2022-05-26 |
Heat treatment process of refining microstructure of carbide-free bainitic steel seamless pipe |
| |
| Cheng Juqiang.Heat treatment process of refining microstructure of carbide-free bainitic steel seamless pipe[J].Heat Treatment of Metals,2022,47(10):119-123. |
| |
| Authors: | Cheng Juqiang |
| |
| Affiliation: | School of Materials Science and Chemical Engineering, Xi'an Technological University, Xi' an Shaanxi 710021, China |
| |
| Abstract: | Microstructure and mechanical properties of carbide-free bainitic seamless steel tube under different heat treatment processes were studied. The results show that the as-hot rolled carbide-free bainitic steel seamless pipe has coarse structure, high strength and low toughness. After hot rolling and low temperature tempering, the toughness improves a little, which is still low. After hot rolling, normalizing and low temperature tempering, the toughness improves, but there is still some coarse microstructure. After hot rolling and high temperature tempering at 690 ℃ for 300 min, then normalizing and low temperature tempering, the microstructure refines and the inheritance eliminates, which greatly improve the toughness of the carbide-free bainitic steel seamless pipe and cause the impact fracture characteristics to change from brittle fracture to ductile fracture. |
| |
| Keywords: | carbide-free bainitic steel seamless pipe microstructure refinement heat treatment process |
|
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载全文 |
|
