| 基于热裂法的液晶玻璃基板激光切割技术研究 |
| |
| 引用本文： | 汪旭煌,姚建华,周国斌,楼程华,杨渊思.基于热裂法的液晶玻璃基板激光切割技术研究[J].激光技术,2011,35(4):472-476. |
| |
| 作者姓名： | 汪旭煌 姚建华 周国斌 楼程华 杨渊思 |
| |
| 作者单位： | 1.浙江工业大学 特种装备制造与先进加工技术教育部/浙江省重点实验室, 杭州 310014; |
| |
| 摘 要： | 为了实现液晶玻璃基板的可控断裂切割,提出了一种液晶玻璃基板激光切割的新方法.采用Nd:YAG激光在液晶玻璃基板上预置初始裂纹,用CO2激光作为热源对其进行加热,并用Ar气进行冷却.分析了激光光斑尺寸和液晶玻璃基板厚度对切割的影响,并与传统机械切割进行了对比.用扫描电子显微镜检测了激光切割后切割表面及断面形貌.结果表明,...
|
| 关 键 词： | 激光技术 激光切割 裂纹控制法 液晶玻璃基板 裂纹扩展 |
| 收稿时间： | 2010-09-29 |
Research of the technology of laser cutting LCD glass substrates based on thermal cracking method |
| |
| WANG Xu-huang,YAO Jian-hua,ZHOU Guo-bin,LOU Cheng-hua,YANG Yuan-si.Research of the technology of laser cutting LCD glass substrates based on thermal cracking method[J].Laser Technology,2011,35(4):472-476. |
| |
| Authors: | WANG Xu-huang YAO Jian-hua ZHOU Guo-bin LOU Cheng-hua YANG Yuan-si |
| |
| Abstract: | In order to cut liquid crystal display (LCD) glass substrates with controlled crack,a new method was put forward.Firstly,an initial crack was prepared on the surface of LCD substrates with Nd: YAG laser.Then,the substrate was heated up with CO2 laser and cooled with Ar gas.The effect of laser spot size and the thickness of LCD glass substrates on laser cutting quality was analyzed.The surface and performance of the cutting face after laser treatment was tested by means of scanning electronic microscope (SEM).The cutting quality was compared with the traditional mechanical cutting quality.The results show that there are lots of micro cracks in the substrates cut with traditional mechanical method,however,the laser cutting surface based on thermal cracking method is smooth and flat,no micro cracks exists,and the cutting section-affecting zone is less than 20μm.It is better to cut LCD glass substrates with thermal crack laser cutting method than mechanical cutting method. |
| |
| Keywords: | |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《激光技术》浏览原始摘要信息 |
|
点击此处可从《激光技术》下载全文 |
|
