| 摆动电弧传感的窄坡口GMAW过程系统建模和仿真 |
| |
| 引用本文： | 罗 雨,张中亮,周灿丰,焦向东,杨成功.摆动电弧传感的窄坡口GMAW过程系统建模和仿真[J].焊接学报,2018,39(1):5-8. |
| |
| 作者姓名： | 罗 雨 张中亮 周灿丰 焦向东 杨成功 |
| |
| 作者单位： | 北京石油化工学院能源工程先进连接技术研究中心;北京化工大学机电工程学院 |
| |
| 摘 要： | 为了研究窄坡口对焊接过程的影响规律，根据焊接的能量平衡和熔滴平衡等原理对基于摆动电弧传感的GMAW系统进行数值仿真. 针对焊炬高度的大小随着焊炬在坡口中的摆动不断变化，建立了包括焊炬摆动、电弧长度、电弧非线性负载及弧焊电源-电弧四个子系统的数学模型. 并将此数学模型转换为Matlab/simulink环境下，涵盖整个焊接回路的GMAW系统动态特征仿真模型. 结果表明，当焊接工艺参数相同时，运行系统仿真模型，可以获得和实际焊接试验基本相同的电流、电压波形数据.
|
| 关 键 词： | 摆动电弧传感 窄坡口 数学模型 仿真 |
| 收稿时间： | 2016/7/21 0:00:00 |
System modeling and simulation of narrow groove GMAW process for oscillating arc sensing |
| |
| LUO Yu,ZHANG Zhongliang,ZHOU Canfeng,JIAO Xiangdong,YANG Chenggong.System modeling and simulation of narrow groove GMAW process for oscillating arc sensing[J].Transactions of The China Welding Institution,2018,39(1):5-8. |
| |
| Authors: | LUO Yu ZHANG Zhongliang ZHOU Canfeng JIAO Xiangdong YANG Chenggong |
| |
| Abstract: | In order to study the influence of narrow groove on the welding process, the numerical simulation of GMAW systems based on the oscillating arc sensor has been studied according to the principle of weding energy balance and droplet balance. The mathematical model of four subsystems, including a welding torch oscillation, an arc length, nonlinear arc load and arc welding power source arc, has been built according to the size of the torch height is changing with torch oscillation in the groove. And the mathematical model is transformed into a GMAW system dynamic characteristic simulation model which covers the whole welding loop under Matlab/simulink environment. The results show that when the welding parameters are the same, by operating the system simulation model, the data of the current and voltage waveforms can be obtained which are basically the same as the actual experiments. |
| |
| Keywords: | swing arc sensor narrow groove mathematical model simulation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
