| 基于Revit二次开发的钢结构节点参数化设计研究 |
| |
| 引用本文： | 陶军,王亮.基于Revit二次开发的钢结构节点参数化设计研究[J].土木建筑工程信息技术,2023,15(1):42-48. |
| |
| 作者姓名： | 陶军 王亮 |
| |
| 作者单位： | 北京建筑大学 土木与交通工程学院，北京 100044 |
| |
| 基金项目： | 住房和城乡建设部科学技术计划项目2017-K8-021 |
| |
| 摘 要： | 使用Revit软件在钢结构节点深化设计过程中，由于节点形式复杂多样，易造成建模困难以及节点设计深度不足的问题。为此，笔者依据钢结构梁柱等节点设计规范要求，结合设计及建造经验，建立了基于Revit族的钢结构梁柱节点、梁梁节点、柱脚节点等参数化族构件模型。引用Revit应用程序编程接口和C#编码识别模型中目标节点的位置，调取已建立的钢结构节点族模型，载入实际项目模型中，以实现参数化钢结构节点模型的自动生成。该方法能够快速生成钢结构节点模型，解决节点处深化设计花费时间成本较多的问题，大大提高设计人员工作效率。
|
Parametric Design of Steel Structure Joints Based on Secondary Development of Revit |
| |
| Abstract: | Due to the complex and diverse forms of joints, it is easy to cause difficulties in modeling and insufficient depth of joint design in the process of deepening steel structure joints by Revit software. Therefore, according to the requirements of the design code for beam-column joints of steel structures and combined with design and construction experience, a parametric family member model of beam-column joints, beam-beam joints, and column foot joints of steel structures based on the Revit family is established. The Revit application programming interface and C # code are used to identify the location of the target node in the model. The established steel structure node family model is selected and loaded into the actual project model to realize the automatic generation of a parametric steel structure node model. This method can quickly generate the steel structure node model, solve the problem of time cost in deepening the design of nodes, and greatly improve the work efficiency of designers. |
| |
| Keywords: | |
|
|
