首页 | 官方网站   微博 | 高级检索  
     

LFM激励信号在超声TOFD检测中的应用
引用本文:丛森,刚铁,张佳莹,盛朝阳.LFM激励信号在超声TOFD检测中的应用[J].焊接学报,2015,36(2):63-66.
作者姓名:丛森  刚铁  张佳莹  盛朝阳
作者单位:哈尔滨工业大学先进焊接与连接国家重点实验室, 哈尔滨 150001
基金项目:国家自然科学基金资助项目(51175113,51105033);国际合作资助项目(2007DFR70070)
摘    要:对于大厚度焊接试件的超声衍射时差法检测(time of flight diffraction, TOFD),常规超声激励难以同时满足信噪比、检测距离以及检测分辨率的要求.文中将线性调频脉冲压缩技术应用在超声TOFD检测中,线性调频(linear frequency modulated, LFM)激励可综合改善检测信噪比(signal to noise ratio, SNR)与分辨率.首先对试验用10 MHz超声换能器进行了LFM信号参数测试,选择了合适的时宽和带宽.对埋藏3 mm高的横槽缺陷的钢板分别进行了超声LFM激励的TOFD检测及常规超声TOFD检测,对比发现超声LFM激励的TOFD检测精度高达0.01μs,可准确区分缺陷上下端衍射波.在较低的激励电压和系统增益下,实现了较高的检测信噪比及分辨率.

关 键 词:超声TOFD检测    LFM激励    脉冲压缩    大厚度焊接试件
收稿时间:2014/5/20 0:00:00

Application of LFM excitation signals to ultrasonic TOFD test
CONG Sen,GANG Tie,ZHANG Jiaying and SHENG Zhaoyang.Application of LFM excitation signals to ultrasonic TOFD test[J].Transactions of The China Welding Institution,2015,36(2):63-66.
Authors:CONG Sen  GANG Tie  ZHANG Jiaying and SHENG Zhaoyang
Affiliation:State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
Abstract:For ultrasonic TOFD test of weld specimen with large thickness, conventional excitation is difficult to satisfy the requirements of SNR(signal to noise ratio), detection distance and resolution. LFM(linear frequency modulation) pulse compression technique is applied to ultrasonic TOFD test in this paper. LFM excitation can improve both SNR and resolution. Firstly, appropriate pulse width and bandwidth for 10 MHz transducer were determined by LFM parameter test. Then, a slot defect hided in the depth of 3 mm in steel plate was tested by ultrasonic LFM-TOFD test and conventional ultrasonic TOFD test. The results show that LFM excitation can make diffracted waves separated obviously, and the precision reaches up to 0.01μs, compared with conventional excitation. In the case of lower exciting voltage and gain, higher SNR and resolution can be achieved.
Keywords:TOFD test  LFM excitation  pulse compression  large thickness weld specimen
本文献已被 CNKI 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号