| 激光熔覆铁基TiC复合涂层成形质量的控制方法 |
| |
| 引用本文： | 吴腾,师文庆,谢林圯,龚美美,黄江,谢玉萍,何宽芳.激光熔覆铁基TiC复合涂层成形质量的控制方法[J].激光技术,2022,46(3):344-354. |
| |
| 作者姓名： | 吴腾 师文庆 谢林圯 龚美美 黄江 谢玉萍 何宽芳 |
| |
| 作者单位： | 1.广东海洋大学 电子与信息工程学院，湛江 524088 |
| |
| 基金项目： | 广东省普通高校重点领域专项基金资助项目;国家自然科学基金;广东海洋大学研究生教育创新计划资助项目 |
| |
| 摘 要： | 为了揭示激光熔覆工艺参数对铁基TiC复合熔覆层成形质量的作用规律、优化激光熔覆工艺参数,使用YAG固体激光器在60Si2Mn基体上激光熔覆铁基TiC复合涂层,基于响应面法建立输出电流、脉冲宽度、扫描速率与熔覆层宽度、高度、熔池深度、宽高比、稀释率以及硬度之间的数学模型,并对模型进行方差分析,获得了工艺参数与成形质量之间...
|
| 关 键 词： | 激光技术 响应面法 成形质量 工艺参数优化 稀释率 |
| 收稿时间： | 2021-04-12 |
Forming quality control method of laser cladding Fe-based TiC composite coating |
| |
| WU Teng,SHI Wenqing,XIE Linyi,GONG Meimei,HUANG Jiang,XIE Yuping,HE Kuanfang.Forming quality control method of laser cladding Fe-based TiC composite coating[J].Laser Technology,2022,46(3):344-354. |
| |
| Authors: | WU Teng SHI Wenqing XIE Linyi GONG Meimei HUANG Jiang XIE Yuping HE Kuanfang |
| |
| Abstract: | In order to reveal the effect of laser cladding process parameters on the forming quality of Fe based TiC composite cladding layer and optimize the laser cladding process parameters, a YAG solid-state laser was used to achieve laser cladding Fe-based TiC composite coating on 60Si2Mn substrate, and a mathematical model was established to study the influence of output current, pulse width, and scanning speed on cladding width, height, molten pool depth, aspect ratio, dilution rate, and hardness based on response surface method. Then the mathematical model was analyzed by variance analysis. And the functional relationship between process parameters and molding quality was obtained. The results show that the output current and pulse width have a positive correlation with the coating width, and the scanning speed is inversely proportional to the coating width; The scanning speed has no significant effect on the height of cladding layer and the depth of molten pool; The ratio of coating width to coating height increases with the increase of output current; The output current has the most significant effect on the coating dilution ratio, followed by the pulse width; High hardness can be obtained with higher output current and scanning speed; The error of the optimized model is less than 5%. The results can be used to predict the forming quality of Fe based ceramic composite coating and optimize the laser processing parameters. |
| |
| Keywords: | |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《激光技术》浏览原始摘要信息 |
|
点击此处可从《激光技术》下载全文 |
|
