| 微机用于抛物线齿同步带传动强度理论的研究 |
| |
| 引用本文： | 姜洪源,关莉,郭建华,陈铁鸣,徐溥滋.微机用于抛物线齿同步带传动强度理论的研究[J].橡胶工业,1996,43(11):643-648. |
| |
| 作者姓名： | 姜洪源 关莉 郭建华 陈铁鸣 徐溥滋 |
| |
| 作者单位： | 哈尔滨工业大学 |
| |
| 摘 要： | 采用啮合原理与弹性力学复交函数相结合的方法，借助计算机对抛物线齿同步带传动强度理论进行了系统研究，并将整个计算过程编制成ＲＨＤＧＲＡＰＨ软件。利用该软件进行了带齿和轮齿及刀具齿形设计、啮合原理分析、应力和变形计算、刀具可加工最小齿数的确定及加工误差分布计算。
|
| 关 键 词： | 抛物线齿同步带 计算机辅助设计 复变函数法 |
Application of Computer to Study on Driving Power of Synchronous Belt with Parabola Teeth |
| |
| Jiang Hongyuan,Guan Li,Guo Jinnhu,Chen Tieming and Xu Puzi.Application of Computer to Study on Driving Power of Synchronous Belt with Parabola Teeth[J].China Rubber Industry,1996,43(11):643-648. |
| |
| Authors: | Jiang Hongyuan Guan Li Guo Jinnhu Chen Tieming and Xu Puzi |
| |
| Affiliation: | Haerbin University of Technology 150001 |
| |
| Abstract: | Based on the combination of the mesh principle with the complex analysis of elastic mechanics,a systematic study was made on the driving power of the synchronous belt withparabola teeth using computer. The whole calculation process was programmed into RHDGRAPHsoftware. The software was used in the tooth design of belt,wheel and cutting tool, the analysis ofmesh principle, the calculation of stress-strain, the determination of the minimum processibletooth number of cutting tool and the calculation of the distribution of process error. |
| |
| Keywords: | synchronous belt with parabola teeth CAD complex analysis |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《橡胶工业》浏览原始摘要信息 |
|
点击此处可从《橡胶工业》下载全文 |
|
