| 小交错角面铣准双曲面齿轮副的几何设计与啮合特性 |
| |
| 引用本文： | 刘思远,宋朝省,朱才朝.小交错角面铣准双曲面齿轮副的几何设计与啮合特性[J].中国机械工程,2022,33(13):1521. |
| |
| 作者姓名： | 刘思远 宋朝省 朱才朝 |
| |
| 作者单位： | 重庆大学机械传动国家重点实验室，重庆，400044 |
| |
| 基金项目： | 国家自然科学基金 (51775061) |
| |
| 摘 要： | 提出一种针对小交错角面铣准双曲面齿轮的几何设计方法，推导了基于单叶双曲面副瞬时轴线的空间节圆锥副设计参数几何关系，提出了考虑齿根平滑过渡的小交错角准双曲面齿轮副啮合特性控制方法。建立了齿轮副啮合模型与有限元分析模型，研究了不同外载荷对齿面啮合特性的影响。小交错角齿轮传动原理样机验证了准双曲面齿轮可在小交错角极端几何尺度下平稳工作。
|
| 关 键 词： | 小交错角 准双曲面齿轮 几何设计 啮合特性 样机验证 |
Design Methodology and Mesh Characteristics of Face-milled Hypoid Gears with Low Crossed Shaft Angle |
| |
| LIU Siyuan,SONG Chaosheng,ZHU Caichao.Design Methodology and Mesh Characteristics of Face-milled Hypoid Gears with Low Crossed Shaft Angle[J].China Mechanical Engineering,2022,33(13):1521. |
| |
| Authors: | LIU Siyuan SONG Chaosheng ZHU Caichao |
| |
| Affiliation: | State Key Laboratory of Mechanical Transmissions，Chongqing University，Chongqing，400044 |
| |
| Abstract: | A design methodology for hypoid gears in low crossed shaft angle was proposed. The geometric relationships of pitch cones were derived based on the instantaneous axis of uniparted hyperboloid. Considering the root part smoothness， the mesh behavior controlling methodology of hypoid gears with low crossed shaft angle was proposed. The finite element analysis was performed to investigate the influences of different loads on the mesh behavior. The prototype of hypoid gears proposed may work in low crossed shaft angle stably. |
| |
| Keywords: | low crossed shaft angle hypoid gear geometry design mesh behavior prototype verification |
|
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载全文 |
