| 粉末净成形压制工艺优化及三维复杂零件结构设计的数值模拟 |
| |
| 引用本文： | 申小平,黄永强.粉末净成形压制工艺优化及三维复杂零件结构设计的数值模拟[J].粉末冶金技术,2019,37(4):298-305. |
| |
| 作者姓名： | 申小平 黄永强 |
| |
| 作者单位： | 南京理工大学工程训练中心, 南京 210094 |
| |
| 摘 要： | 基于粉末连续体，运用MSC.Marc有限元软件对粉末净成形压制工艺进行优化，并对减重齿轮的结构设计进行数值模拟。通过与实验数据对比分析，验证了材料模型及仿真模拟的可靠性，在此基础上利用有限元软件研究分析压制方式、压制速度、摩擦系数、压制温度、保压时间等五组因素对压坯密度分布的影响。结果表明，压制方式是最显著的影响因子，采用双向压制、温压成形、低压制速度、小摩擦系数及保压方式的组合压制工艺能有效地改善粉体的密度分布。利用有限元软件对减重齿轮的结构进行优化设计，研究圆环高径比与压坯相对密度的关系，并确定减重孔最佳尺寸。结果表明，采用强制摩擦压制方式代替浮动压制方式，可有效改善孔洞薄壁处密度。此外，结合Workbench有限元软件对减重齿轮进行结构力学模拟仿真，分析薄壁处的受力情况，以满足对齿轮强度的要求。
|
| 关 键 词： | 粉末净成形 压制工艺 数值模拟 相对密度 |
| 收稿时间： | 2018-09-17 |
Optimization of powder net-shape compacting technology and structural design of 3D complex parts by numerical simulation |
| |
| Affiliation: | Engineering Training Centre, Nanjing University of Science and Technology, Nanjing 210094, China |
| |
| Abstract: | The optimization of powder net-shape compacting technology and the structural design of weight reduction gear were simulated by MSC.Marc software based on the finite element method (FEM). The reliability and accuracy of the proposed FEM model were validated by the experimental results. The influences of compacting mode, compacting speed, friction coefficient, compacting temperature, and dwell time on the relative density distribution of compaction were studied by the finite element software. In the result, the combined compacting process can effectively improve the density distribution of powders as double-action pressing + warm compacting + low compacting speed + small friction coefficient + pressure maintaining. The optimal structure of weight reduction gear was carried out by the proposed FEM model, the relationship between the height-diameter ratio of spur gear and the relative density of compaction was studied, and the optimum size of weight reducing hole was determined. The results show that, the density on the thin wall of the hole can be effectively improved by using the forced friction pressing mode instead of floating pressing mode. The structural mechanics of weight reduction gear was simulated by Workbench software, the force condition on the thin wall was analyzed to reach the strength requirements of gear. |
| |
| Keywords: | |
|
| 点击此处可从《粉末冶金技术》浏览原始摘要信息 |
|
点击此处可从《粉末冶金技术》下载全文 |
|
