首页 | 官方网站   微博 | 高级检索  
     

钛白废酸加压浸出钛精矿制备富钛料实验研究
引用本文:马光强,邹 敏,夏 冬.钛白废酸加压浸出钛精矿制备富钛料实验研究[J].无机盐工业,2016,48(8):67.
作者姓名:马光强  邹 敏  夏 冬
作者单位:攀枝花学院生物与化学工程学院,四川攀枝花 617000
摘    要:基于硫酸钛白生产工艺的现状,将钛白废硫酸综合利用与富钛料的生产相结合,开展了钛白废酸加压浸出钛精矿制备富钛料的实验研究,并分别考察了酸矿比、浸出温度、浸出时间等因素对富钛料品位的影响。研究结果表明:在酸矿比(mL/g)为8∶1、酸浸温度为150 ℃、酸浸时间为7~8 h的条件下,可获得二氧化钛品位达80%以上的富钛料。通过XRD分析可知,酸浸完成后,钛精矿中的主要物相FeTiO3已转换为富钛料中的二氧化钛物相。

关 键 词:钛白废酸  加压浸出  钛精矿  富钛料  

Experimental study on titanium concentrate leaching to prepare Ti-rich material with titanium dioxide waste acid
MA Guang-Qiang,ZOU Min,XIA Dong.Experimental study on titanium concentrate leaching to prepare Ti-rich material with titanium dioxide waste acid[J].Inorganic Chemicals Industry,2016,48(8):67.
Authors:MA Guang-Qiang  ZOU Min  XIA Dong
Affiliation:School of Biological and Chemical Engineering,Panzhihua University,Panzhihua 617000,China
Abstract:Based on the present situation of the sulfuric acid titanium dioxide production process,the comprehensive utiliza- tion of titanium dioxide waste acid and the preparation of Ti-rich material were combined.The experimental study on titanium concentrate leaching to prepare Ti-rich material with titanium dioxide waste acid was carried out.The influences of acid-min- eral ratio,leaching temperature,and time etc.on the grade of Ti-rich material were investigated.Research results showed that:in a acid-mineral ratio(mL/g) of 8∶1,leaching temperature of 150 ℃,and leaching time of 7~8 h,the Ti-rich material with TiO2 grade of more than 80% could be obtained.Through XRD analysis,the main phase FeTiO3 of the titanium concentrate has been converted into the TiO2 phase of the Ti-rich material after acid leaching
Keywords:titanium dioxide waste acid  pressure leaching  titanium concentrate  Ti-rich material  
点击此处可从《无机盐工业》浏览原始摘要信息
点击此处可从《无机盐工业》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号