| 模切辊激光表面淬火的研究 |
| |
| 引用本文： | 晁明举,杜远东,梁二军,余菊美.模切辊激光表面淬火的研究[J].激光技术,2003,27(6):500-502,509. |
| |
| 作者姓名： | 晁明举 杜远东 梁二军 余菊美 |
| |
| 作者单位： | 1.郑州大学物理工程学院, 郑州, 450052; |
| |
| 基金项目： | 河南省高校创新人才基金，2 0 0 1年度河南省杰出人才创新基金资助项目 |
| |
| 摘 要： | 用连续波CO2激光束对50#钢模切辊进行了激光表面淬火试验,研究了淬火层的显微组织及硬度分布.结果表明,50#钢模切辊经激光表面淬火后,硬化层组织由细小的位错马氏体及少量的残余奥氏体组成;模切辊变形很小,且表面硬度高,整体硬度分布较为均匀,能够达到技术要求.采用激光淬火技术对50#钢模切辊进行表面强化是可行的.
|
| 关 键 词： | 激光表面淬火 50#钢 模切辊 CO2激光 |
| 文章编号： | 1001-3806(2003)06-0500-03 |
| 收稿时间： | 2002/12/30 |
Investigation of laser surface hardening for mould-cutting roller |
| |
| Chao Mingju ,Du Yuandong ,Liang Erjun ,Yu Jumei.Investigation of laser surface hardening for mould-cutting roller[J].Laser Technology,2003,27(6):500-502,509. |
| |
| Authors: | Chao Mingju Du Yuandong Liang Erjun Yu Jumei |
| |
| Affiliation: | Chao Mingju 1,Du Yuandong 2,Liang Erjun 1,Yu Jumei 1 |
| |
| Abstract: | The laser surface hardening for mould-cutting roller of 50 carbon steel is carried out using continuous wave CO 2 laser beam. The microstructure observation and hardness distribution testing in the cross-section of the hardened layer are performed. The results indicate that the microstructure of the hardened layer of mould-cutting roller quenched consists of the fine dislocated lath martensite and a small quantity of residual austenite. After laser surface hardening,the mould-cutting roller possesses of small contraction distortion,high hardness,and uniform distribution of hardness. And hence using laser surface hardening process to modify the surface of mould-cutting roller of 50 carbon steel is practicable. |
| |
| Keywords: | laser surface hardening 50 carbon steel mould-cutting roller CO 2 laser |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《激光技术》浏览原始摘要信息 |
|
点击此处可从《激光技术》下载全文 |
|
