首页 | 官方网站   微博 | 高级检索  
     

摩擦自适应补偿在导引头稳定平台控制系统中的应用
引用本文:孙高,朱明超,贾宏光,刘慧.摩擦自适应补偿在导引头稳定平台控制系统中的应用[J].红外与激光工程,2013,42(5):1316-1321.
作者姓名:孙高  朱明超  贾宏光  刘慧
作者单位:1.中国科学院长春光学精密机械与物理研究所,吉林 长春 130033;
基金项目:中国科学院“三期创新”平台资助项目
摘    要:为提高两轴双框架导引头稳定平台的隔离度,设计了导引头控制系统。在惯性空间基础上,建立了导引头的隔离度模型,分析了影响系统隔离度的主要因素。根据对系统摩擦性质的分析,建立了系统的摩擦模型,并确定了摩擦补偿算法。采用极点配置和超前滞后的方法设计了控制器,并通过仿真和实验的方法验证了摩擦自适应补偿算法的可行性。俯仰单通道仿真结果表明,摩擦自适应补偿算法能准确估计出模型参数,且在弹体扰动幅值为1,频率为2 Hz时,系统在摩擦自适应补偿后,俯仰框隔离度提高了97.14%。实验结果显示,在弹体扰动幅值为1,频率为2 Hz时,导引头俯仰框和偏航框的隔离度分别为1.58%和1.81%;在弹体扰动幅值为3,频率为3 Hz时,导引头俯仰框和偏航框的隔离度分别为2.84%和2.15%。

关 键 词:摩擦自适应补偿    隔离度    导引头    极点配置
收稿时间:2012-09-10

Adaptive friction compensation in seeker stabilized platform servo control system
Affiliation:1.Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;2.University of Chinese Academy of Sciences,Beijing 100049,China
Abstract:In order to improve the disturbance rejection of seeker stabilized platform, the servo control system was designed. The disturbance rejection model was proposed based on inertia space and the main factors that influence the disturbance rejection were shown. Then, the friction model was established based on the characteristic of friction and the friction adaptive compensation algorithm was proposed. The velocity controller was designed based on the pole-placement method while the lead-lag compensator was used as position controller. Simulation result indicated that the disturbance rejection of pitch frame improved 97.14 percent while the missile disturbance was 1 and 2 Hz. Experimental results showed that the disturbance rejection of two frame were 1.58%、1.81% and 2.84%、2.15% while the missile disturbance were 1 and 2 Hz and 3 and 3 Hz. The disturbance rejection of seeker stabilized platform was improved by using friction adaptive compensation.
Keywords:
点击此处可从《红外与激光工程》浏览原始摘要信息
点击此处可从《红外与激光工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号