| W-Ni-Sr电极烧蚀形貌研究 |
| |
| 引用本文： | 张保红,唐亮亮.W-Ni-Sr电极烧蚀形貌研究[J].粉末冶金技术,2020,38(4):289-294. |
| |
| 作者姓名： | 张保红 唐亮亮 |
| |
| 作者单位： | 1.安泰科技股份有限公司, 北京 100081 |
| |
| 摘 要： | 制备了W-Ni-Sr钨合金电极材料, 分析了W-Ni-Sr电极烧蚀失效后的形貌, 并探讨了钨合金电极材料的优化方向。结果表明, 电极的击穿和烧蚀主要发生在钨酸盐相, 烧蚀后仅发生Ni17W3和Sr3WO6两相的消耗, 没有新相产生; 主要是低熔点组分发生熔化、溅射, 沉积在电极表面, 导致电极表面形貌改变, 从而影响发射均匀性; 改善材料的组织均匀性和减小晶粒度可有利于钨合金电极使用性能的提高。
|
| 关 键 词： | 钨合金 电极 烧蚀 形貌 |
| 收稿时间： | 2019-05-15 |
Study on the erosion morphology of W-Ni-Sr electrode |
| |
| Affiliation: | 1.Advanced Technology and Materials Co., Ltd., Beijing 100081, China2.ATTL Advanced Materials Co., Ltd., Beijing 100094, China |
| |
| Abstract: | The W-Ni-Sr tungsten alloy electrode materials were prepared, the morphology of the W-Ni-Sr electrode erosion was studied, and the optimization of the tungsten alloy electrode materials was discussed. In the results, the breakdown and erosion mainly occur in the tungstate phase, only Ni17W3 and Sr3WO6 phases are consumed, and no new phase is found after the erosion. The components with the low melting point are melted, sputtered, and deposited on the electrode surface, resulting in the changes of electrode surface morphology and affecting the emission uniformity. The electrode performance can be improved by improving the uniformity of the tungsten alloy electrode materials and reducing the grain size. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《粉末冶金技术》浏览原始摘要信息 |
|
点击此处可从《粉末冶金技术》下载全文 |
|
