首页 | 官方网站   微博 | 高级检索  
     

大型土工离心机TLJ-500模态分析与试验
引用本文:李锋,杜强,王玉军,陈学前,冯加权.大型土工离心机TLJ-500模态分析与试验[J].长江科学院院报,2012,29(3):91-94.
作者姓名:李锋  杜强  王玉军  陈学前  冯加权
作者单位:中国工程物理研究院 总体工程研究所,四川 绵阳 621900
摘    要:模态分析与试验是研究离心机结构动力特性的重要手段,其广泛应用于离心机的设计和验证中。分别采用理论计算和试验的方法对大型土工离心机TLJ-500进行模态分析,得到了TLJ-500的前若干阶模态参数,并将2种方法得到的模态频率和振型进行了比较。分析表明,离心机连接部位的刚度等对理论计算的结果影响较大,模态试验应在2个方向上激振以避免漏阶。针对离心机模态分析与试验提出了合理的建议,对提高离心机的模态分析精度和后续离心机振动台的设计具有一定的参考价值。

关 键 词:土工离心机  模态分析  模态试验  TLJ-500  
收稿时间:2011-07-20

Modal Analysis and Modal Test of Large Geotechnical Centrifuge TLJ-500
LI Feng , DU Qiang , WANG Yu-jun , CHEN Xue-qian , FENG Jia-quan.Modal Analysis and Modal Test of Large Geotechnical Centrifuge TLJ-500[J].Journal of Yangtze River Scientific Research Institute,2012,29(3):91-94.
Authors:LI Feng  DU Qiang  WANG Yu-jun  CHEN Xue-qian  FENG Jia-quan
Affiliation:Institute of System Engineering, China Academy of Engineering Physics, Mianyang  621900,China
Abstract:As important approaches of studying structural dynamic characteristics,modal analysis and modal test are widely used in the design and verification of centrifuge.Theoretical calculation and tests are carried out to acquire the low-order modal parameters of large geotechnical centrifuge TLJ-500.The results of modal frequency and vibration mode from the two approaches are compared.It’s shown that the stiffness at the joints of the centrifuge plays an important part in determining the modal frequency,and the test model should be impacted in two different directions so as to get more modal parameters.Suggestions are put forward on the basis of the above analysis.The result of this paper is not only valuable for improving the precision of modal analysis on geotechnical centrifuge,but also for the subsequent design of centrifuge shaker.
Keywords:geotechnical centrifuge  modal analysis  modal test  TLJ-500
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《长江科学院院报》浏览原始摘要信息
点击此处可从《长江科学院院报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号