| 空心铝合金结构填充相变材料的换热特性 |
| |
| 引用本文： | 张嘉杰,屈治国,马素霞,杨艳霞.空心铝合金结构填充相变材料的换热特性[J].化工学报,2017,68(5):1845-1851. |
| |
| 作者姓名： | 张嘉杰 屈治国 马素霞 杨艳霞 |
| |
| 作者单位： | 1.太原理工大学电气与动力工程学院, 山西 太原 030024;2.西安交通大学能源与动力工程学院, 陕西 西安 710049 |
| |
| 基金项目： | 国家自然科学基金项目（51506139）。 |
| |
| 摘 要： | 实验研究了空心铝合金结构承载件内部填充相变材料的非稳态换热特征，通过测试试件加热面与背热面的温度响应分析了孔隙率、孔径等因素对换热过程的影响规律。研究结果表明：填充石蜡试件的换热过程可划分为熔化前显热区间、熔化区间、熔化后显热区间3个阶段；熔化区间的潜热吸收使得试件填充石蜡时的温控时间可达到不填充石蜡时的2.5倍；试件孔隙率越大或孔径越大，则其加热面与背热面的温差越大，熔化时间越长。
|
| 关 键 词： | 相变 传热 瞬态响应 空心铝合金结构 相变材料 孔隙率 |
| 收稿时间： | 2016-10-08 |
| 修稿时间： | 2016-12-05 |
Heat transfer performance of hollow aluminium structure filled with PCM |
| |
| ZHANG Jiajie,QU Zhiguo,MA Suxia,YANG Yanxia.Heat transfer performance of hollow aluminium structure filled with PCM[J].Journal of Chemical Industry and Engineering(China),2017,68(5):1845-1851. |
| |
| Authors: | ZHANG Jiajie QU Zhiguo MA Suxia YANG Yanxia |
| |
| Affiliation: | 1.College of Electrical and Power Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China;2.School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, Shaanxi, China |
| |
| Abstract: | The transient thermal performances of hollow aluminium structure filled with PCM (phase change material) are experimentally studied. The effects of related parameters with porosity and hole diameter are discussed. Results show that the heat transfer process can be divided into three stages, including the sensible heat region before melting, the melting region, and the sensible heat region after melting. The temperature control time for sample with PCM is 2.5 times than that without PCM due to the absorption of latent heat in the melting region. The sample with higher porosity or higher hole diameter behaves the larger temperature difference between heated and back surfaces, and also the longer melting duration time. |
| |
| Keywords: | phase change heat transfer transient response hollow aluminium structure PCM porosity |
|
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载全文 |
|
