| 缝合复合材料II型层间断裂特性研究 |
| |
| 引用本文： | 朱华东,矫桂琼,杨宝宁.缝合复合材料II型层间断裂特性研究[J].复合材料学报,2001,18(2):85-88. |
| |
| 作者姓名： | 朱华东 矫桂琼 杨宝宁 |
| |
| 作者单位： | 1.西北工业大学 工程力学系, 西安 710072; |
| |
| 摘 要： | 分别采用测量ENF试样加载点位移与测量其端部剪切位移CSD(Crack Shear Displacement)的试验方法,研究了缝合复合材料层合板的II型层间断裂韧性以及缝合密度,缝合线的直径等缝合参数对于缝合复合材料层合板II型层间断裂韧性和分层模式的影响。结果表明,缝合降低了层合板初始分层韧性GIIi,但对于分层的扩展有良好的抑制作用。缝合参数对此有较大影响。
|
| 关 键 词： | 复合材料层合板 缝合 II型层间断裂韧性 裂纹扩展阻力 |
| 文章编号： | 1000-3851(2001)02-0085-04 |
| 收稿时间： | 1999-09-14 |
| 修稿时间： | 1999年9月14日 |
INVESTIGATION INTO THE EFFECT OF STITCHING IN CFRP ON MODE II DELAMINATION TOUGHNESS |
| |
| Zhu Huadong,JIAO Guiqiong,YANG Baoning.INVESTIGATION INTO THE EFFECT OF STITCHING IN CFRP ON MODE II DELAMINATION TOUGHNESS[J].Acta Materiae Compositae Sinica,2001,18(2):85-88. |
| |
| Authors: | Zhu Huadong JIAO Guiqiong YANG Baoning |
| |
| Affiliation: | 1.Dept. of Engineering Mechanics, Northwestern Polytechnical University, Xi'an 710072, China;2.Institute of Spacecraft System Engineering, Beijing 100083, China |
| |
| Abstract: | Effects of through thickness stitching on Mode II interlaminar fracture toughness( G II ) and modes of delamination of composite laminates were investigated by performing end notched flexure(ENF) tests. Vertical displacement of loading point and crack shear displacement(CSD) between upper and lower crack surfaces at the end of ENF specimens were measured. Different stitch yarns and stitch densities were considered. The addition of stitching was found to decrease the initiation interlaminar fracture toughness G IIi , but can effectively suppress the growth of delamination. |
| |
| Keywords: | composite laminates stitching mode II interlaminar fracture toughness crack growth resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载全文 |
