首页 | 官方网站   微博 | 高级检索  
     

实测模态和结构模型同步修正的结构损伤识别方法
引用本文:张纯,宋固全,吴光宇.实测模态和结构模型同步修正的结构损伤识别方法[J].振动与冲击,2010,29(9):1-4.
作者姓名:张纯  宋固全  吴光宇
作者单位:南昌大学建筑工程学院,南昌,330031
基金项目:国家自然科学基金青年基金,江西省自然科学青年基金,江西省教育厅青年科学基金 
摘    要:在基于灵敏度分析的有限元模型修正方法基础上,提出一种对实测模态和结构模型同步修正的结构损伤识别方法。即利用有损结构模态与测量噪声在时频域内的差异,以结构有限元模型为基准,对实测模态差进行小波去噪处理,再利用修正后的模态构造目标函数,进行有限元模型修正,经过迭代计算最终可识别结构的损伤。数值算例表明该方法可有效降低噪声的影响,提高损伤识别的精度。

关 键 词:模型修正  小波去噪  损伤识别
收稿时间:2009-6-5
修稿时间:2009-7-29

Structural damage identification by synchronally updating measured modes and finite element model
ZHANG Chun,SONG Gu-quan,WU Guang-yu.Structural damage identification by synchronally updating measured modes and finite element model[J].Journal of Vibration and Shock,2010,29(9):1-4.
Authors:ZHANG Chun  SONG Gu-quan  WU Guang-yu
Affiliation:ZHANG Chun,SONG Gu-quan,WU Guang-yu(School of Civil Engineering and Architecture,Nanchang University,Nanchang 330031,China)
Abstract:A damage identification method by synchronally updating measured vibration modes and finite element model was developed based on the classic sensitivity-based model updating method.A wavelet de-noising treatment was proposed to reduce the noise in modal difference between measured model and analysis mode by the finite element model according to different time-frequency features between structural modal signal and noise.The de-noised modes were used to construct objective function and the optimal question wa...
Keywords:model updating  wavelet denoising  damage identification  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《振动与冲击》浏览原始摘要信息
点击此处可从《振动与冲击》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号