| 千层钢组织和力学性能分析 |
| |
| 引用本文： | 赵小康,曹 睿,张晓波,张瑞华,陈剑虹.千层钢组织和力学性能分析[J].焊接学报,2018,39(1):45-49. |
| |
| 作者姓名： | 赵小康 曹 睿 张晓波 张瑞华 陈剑虹 |
| |
| 作者单位： | 兰州理工大学有色金属先进加工与再利用省部共建国家重点实验室;钢铁研究总院 |
| |
| 摘 要： | 1. 兰州理工大学 有色金属先进加工与再利用省部共建国家重点实验室，兰州 730050；2. 钢铁研究总院，北京 100081
|
| 关 键 词： | 千层钢 组织 拉伸性能 弯曲性能 断口 |
| 收稿时间： | 2016/7/29 0:00:00 |
Microstructure and mechanical properties of multilayered steel |
| |
| ZHAO Xiaokang,CAO Rui,ZHANG Xiaobo,ZHANG Ruihu,CHEN Jianhong.Microstructure and mechanical properties of multilayered steel[J].Transactions of The China Welding Institution,2018,39(1):45-49. |
| |
| Authors: | ZHAO Xiaokang CAO Rui ZHANG Xiaobo ZHANG Ruihu CHEN Jianhong |
| |
| Abstract: | Microstructure and corresponding mechanical properties of multilayered steel were revealed by SEM observation and analysis of tensile and bending properties. Analysis results show that the tensile strength of multilayered steel is 966 MPa, the elongation is 17% and this material exhibits excellent bending properties, the bending strength is 5 452 MPa, bending deflection is 22 mm when the multilayered steel is bent to 136°. From the tensile fracture and the microscopic appearance of bending to 180°, it can be found that brittle cracking appeared in big block phase of middle layer and dimple fracture characteristics appeared at matrix during the fracture process, delamination cracking were easily induced in the interface between Ni layer and the middle layer; However, there were satisfied interface between the martensitic layer of on both sides and the Ni layer, and a lot of plastic deformation with dimple morphology were produced in the interface between the martensitic layer of on both sides and the Ni layer with during the tension and produced in bending. |
| |
| Keywords: | multilayered steel microstructure tensile property bending properties fracture surface |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
