| 中厚钢板大功率固体激光切割模式 |
| |
| 引用本文： | 王威,林尚扬,徐良,滕彬.中厚钢板大功率固体激光切割模式[J].焊接学报,2015,36(4):39-42. |
| |
| 作者姓名： | 王威 林尚扬 徐良 滕彬 |
| |
| 作者单位： | 机械科学研究院哈尔滨焊接研究所,哈尔滨,150080 |
| |
| 基金项目： | 国家国际科技合作资助项目(2010DFR50770) |
| |
| 摘 要： | 对30mm厚钢板进行大功率固体激光切割试验,研究了主要工艺参数对切割特性的影响,揭示了中厚板激光切割的传热机理.结果表明,中厚板激光切割时呈现窄缝和宽缝两种切割模式,氧气压力和激光离焦量对窄缝-宽缝切割模式转变有很大的影响.窄缝横截面呈现出较平直的"I"型,宽缝横截面呈现出上宽下窄的"V"型.
|
| 关 键 词： | 激光切割 切割机理 中厚板切割 大功率固体激光 |
| 收稿时间： | 2004/12/11 0:00:00 |
High power solid-state laser cutting mechanism of thick steel plates with O2 |
| |
| WANG Wei,LIN Shangyang,XU Liang and TENG Bin.High power solid-state laser cutting mechanism of thick steel plates with O2[J].Transactions of The China Welding Institution,2015,36(4):39-42. |
| |
| Authors: | WANG Wei LIN Shangyang XU Liang and TENG Bin |
| |
| Affiliation: | WANG Wei;LIN Shangyang;XU Liang;TENG Bin;Harbin Welding Institute,China Academy of Machinery Science & Technology; |
| |
| Abstract: | 6 kW disk laser-oxygen cutting experiment on 30 mm thick steel plate was carried out to reveal the thick plate laser cutting mechanism. The influence of main process parameters on laser cut quality was investigated. The results indicated that two laser cutting modes, i.e., narrow kerf mode and wide kerf mode were found when performing thick plate laser cutting. Oxygen pressure and laser defocused distance had a significant influence on transformation between two laser cutting modes. Cross section of wide kerf was found to be V type, while narrow kerf is I type. The kerf surface of two laser cutting modes was observed, indicating two different laser cutting processes. |
| |
| Keywords: | @@ |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
