首页 | 官方网站   微博 | 高级检索  
     

氧化铝空心球在钻进坚硬致密岩石钻头中的作用
引用本文:叶宏煜,杨展,谭松成,谢涛,张建伟.氧化铝空心球在钻进坚硬致密岩石钻头中的作用[J].金刚石与磨料磨具工程,2018,38(6):44-47.
作者姓名:叶宏煜  杨展  谭松成  谢涛  张建伟
作者单位:1. 武汉万邦激光金刚石工具股份有限公司, 武汉 430056;2. 中国地质大学(武汉) 机械与电子信息工程学院, 武汉 430074
摘    要:基于岩石破碎原理分析研究用于钻进坚硬致密岩石的钻头及其性能,设计预合金粉胎体性能以及热压工艺参数。在此基础上,提出使用氧化铝空心球弱化钻头胎体,并对添加粒度尺寸0.3 mm、0.6 mm、0.9 mm和体积分数12%、15%和18%的氧化铝空心球制备的胎体进行耐磨性能试验。结果表明:胎体耐磨性分别降低了9%~31%;当氧化铝空心球粒度尺寸为0.3 mm,体积分数为18%时,胎体的耐磨性降幅达到最大的31.25%。 

关 键 词:氧化铝空心球    耐磨性弱化    预合金粉

Effect of alumina hollow spheres on bits drilling into hard and compact rock
YE Hongyu,YANG Zhan,TAN Songcheng,XIE Tao,ZHANG Jianwei.Effect of alumina hollow spheres on bits drilling into hard and compact rock[J].Diamond & Abrasives Engineering,2018,38(6):44-47.
Authors:YE Hongyu  YANG Zhan  TAN Songcheng  XIE Tao  ZHANG Jianwei
Affiliation:1. Wuhan Wanbang Laser Diamond Tools Co., Ltd., Wuhan 430056, China;2. Mechanical & Electronic Engineering, China University of Geosciences, Wuhan 430074, China
Abstract:Based on the rock breaking principle, the performance of bits which are used to drill into hard and compact rock is analyzed and studied. The composition and performance of prealloyed powder matrix and the hot pressing process parameters are designed. On this basis, it is proposed to use alumina hollow spheres to weaken the matrix. Tests are implemented by using alumina hollow spheres with 0.3 mm, 0.6 mm and 0.9 mm particle size and 12%, 15% and 18% volume fraction. It is found that the wear resistance of matrices is decreased by 9% to 31%, respectively. In conclusion, the decrease of matrix wear resistance could be decreased by 31.25% when the particle size of alumina hollow spheres is 0.3 mm and its volume fraction is 18%. 
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《金刚石与磨料磨具工程》浏览原始摘要信息
点击此处可从《金刚石与磨料磨具工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号