| 金属结合剂金刚石砂轮中铝基结合剂性能优化研究 |
| |
| 引用本文： | 陈克鑫,刘一波,曹彩婷,刘伟.金属结合剂金刚石砂轮中铝基结合剂性能优化研究[J].金刚石与磨料磨具工程,2018,38(2):20-25. |
| |
| 作者姓名： | 陈克鑫 刘一波 曹彩婷 刘伟 |
| |
| 作者单位： | 1. 钢铁研究总院, 北京 100081;2. 北京安泰钢研超硬材料制品有限责任公司, 北京 102200 |
| |
| 基金项目： | 北京市科委超硬材料制品工程技术研究中心2013年度科技创新基地培育与发展工程专项:“钨钼靶材用高性能金刚石砂轮技术开发”。 |
| |
| 摘 要： | 以AlSi20为主元，选择强化铝的常用合金元素Cu、Zn、Mg、Mn等4因素（分别用A、B、C、D表示），每个因素各取3个水平，制定了L9（34）正交试验方案。采用热压烧结制备铝基结合剂胎体。通过阿基米德排水法、硬度测试、三点弯曲强度测试、扫描电镜观察断口形貌等方法，研究合金元素对铝基结合剂性能的影响。实验结果表明:添加的合金元素降低AlSi20的烧结温度，促进烧结致密化；合金元素对硬度的影响大小顺序为Mn>Zn>Cu>Mg，对抗弯强度的影响大小顺序为Cu>Mn>Zn>Mg；组合A1B2C2D2、A1B3C3D3有高的硬度和抗弯强度，胎体对金刚石包镶紧密；结合剂断裂方式为脆性断裂，可以提高金刚石砂轮的自锐性。
|
| 关 键 词： | 金刚石砂轮 铝基结合剂 脆性断裂 自锐性 |
Performance optimization of Al-based bond matrix in metallic bond diamond wheel |
| |
| CHEN Kexin,LIU Yibo,CAO Caiting,LIU Wei.Performance optimization of Al-based bond matrix in metallic bond diamond wheel[J].Diamond & Abrasives Engineering,2018,38(2):20-25. |
| |
| Authors: | CHEN Kexin LIU Yibo CAO Caiting LIU Wei |
| |
| Affiliation: | 1. Central Iron & Research Institute Group, Beijing 100081, China;2. Beijing Gang Yan Diamond Products Co., Ltd., Beijing 102200, China |
| |
| Abstract: | Commonly used alloying elements, namely Cu, Zn, Mg and Mn, were selected to strengthen aluminum with AlSi20 as the main component. The factors, each with three levels, were marked as A, B, C and D, respectively. The L9(34) orthogonal test scheme was developed. Al-based bonding matrix was prepared by hot pressing sintering. The effects of alloying elements on the properties of the matrix were studied by means of Archimedes drainage method, rockwell hardness test, three-point bending strength test and scanning electron microscope. Results show that the addition of alloy elements reduces the sintering temperature of AlSi20 and promotes the densification of sintering. The influence of alloy elements on hardness is Mn>Zn>Cu>Mg. The influence of bending strength is Cu>Mn>Zn>Mg. In conclusion, the combination of A1B2C2D2 and A1B3C3D3 have high hardness and bending strength, whose matrices are closely tied to diamond. The fracture mode of binding agent is brittle fracture, which can improve the self-dressing ability of diamond grinding wheel. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《金刚石与磨料磨具工程》浏览原始摘要信息 |
|
点击此处可从《金刚石与磨料磨具工程》下载全文 |
|
