| 碳含量对Al0.5Co0.5NiCrFe高熵合金涂层组织与性能的影响 |
| |
| 引用本文： | 时海芳,李强.碳含量对Al0.5Co0.5NiCrFe高熵合金涂层组织与性能的影响[J].金属热处理,2022,47(3):136-141. |
| |
| 作者姓名： | 时海芳 李强 |
| |
| 作者单位： | 辽宁工程技术大学 材料科学与工程学院, 辽宁 阜新 123000 |
| |
| 摘 要： | 使用氩弧熔覆制备不同碳含量Al0.5Co0.5NiCrFe高熵合金涂层,研究碳含量对Al0.5Co0.5NiCrFe高熵合金涂层组织与性能的影响。结果表明:碳加入后,高熵合金均由单一的FCC结构组成,并没有表征出其他物质,但根据高熵合金显微组织与能谱分析可以发现,高熵合金的枝晶间有碳铬化合物生成。高熵合金涂层的组织为典型的树枝晶结构,随着碳含量的增加,组织不断细化。随碳含量的增加,高熵合金涂层的硬度不断升高,当碳含量为4%时,硬度(383.2 HV0.5)和耐磨性均为最佳。随碳含量的不断增加,高熵合金的耐腐蚀性先增强后减弱,碳含量为2%时耐腐蚀性最佳。根据单位面积氧化增量,高熵合金的抗氧化性先增大后减小,当碳含量为2%时,抗氧化性最佳。
|
| 关 键 词： | 高熵合金涂层 耐磨性 耐腐蚀性 抗氧化性 |
| 收稿时间： | 2021-12-30 |
Effect of carbon content on microstructure and properties of Al0. 5Co0. 5NiCrFe high-entropy alloy coating |
| |
| Shi Haifang,Li Qiang.Effect of carbon content on microstructure and properties of Al0. 5Co0. 5NiCrFe high-entropy alloy coating[J].Heat Treatment of Metals,2022,47(3):136-141. |
| |
| Authors: | Shi Haifang Li Qiang |
| |
| Affiliation: | School of Materials Science and Engineering, Liaoning Technical University, Fuxin Liaoning 123000, China |
| |
| Abstract: | Al0.5Co0.5NiCrFe high-entropy alloy coatings with different carbon contents were prepared by argon arc cladding, and effect of carbon content on the microstructure and properties of the Al0.5Co0.5NiCrFe high-entropy alloy coating was studied. The results show that after the addition of carbon, the high-entropy alloys are all composed of a single FCC structure, and no other structure are characterized. However, according to the microstructure and energy spectrum analysis of the high-entropy alloy, it can be found that there is carbon and chromium between the dendrites of the high-entropy alloy. The microstructure of the high-entropy alloy coating is a typical dendritic structure, and the microstructure is continuously refined with the increase of carbon content. With the increase of carbon content, the hardness of high-entropy alloy coating increases continuously. When the carbon content is 4%, the highest hardness is 383.2 HV0.5, and the wear resistance is also the best. With the continuous increase of carbon content, the corrosion resistance of high-entropy alloy first increases and then weakens, and when the carbon content is 2%, corrosion resistance is the best. According to the oxidation mass gain per unit area, the oxidation resistance of the high-entropy alloy first increases and then decreases. When the carbon content is 2%, the coating has the best oxidation resistance. |
| |
| Keywords: | high-entropy alloy coating wear resistance corrosion resistance oxidation resistance |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载全文 |
|
