首页 | 官方网站   微博 | 高级检索  
     

基于温变形耦合逆相变细化铁素体制备
引用本文:王志豪,李红斌,刘立涛.基于温变形耦合逆相变细化铁素体制备[J].金属热处理,2023,48(4):35-39.
作者姓名:王志豪  李红斌  刘立涛
作者单位:1.华北理工大学 冶金与能源学院, 河北 唐山 063210;2.河北津西钢铁集团股份有限公司, 河北 唐山 064302
基金项目:河北省自然科学基金高端钢铁冶金联合基金(E2020209040);华北理工大学生创新项目(X2021325)
摘    要:采用Gleeble-3500热模拟试验机进行650℃多道次温变形以研究某中碳钢奥氏体及铁素体晶粒的细化,并利用OM、TEM和EBSD等检测手段进行表征。结果表明,650℃下6道次的快速压缩变形(总应变为2.6)后有逆转变发生,所得奥氏体晶粒平均尺寸为3.4μm;再在10℃/s的速率冷却到600℃,可以形成平均晶粒尺寸为0.64μm的铁素体,且渗碳体呈粒状分布于基体之上。

关 键 词:中碳钢  温变形  形变诱发逆转变  晶粒细化  粒状渗碳体
收稿时间:2022-10-18

Ferrite refinement preparation based on coupling of warm deformation and reversal transformation
Wang Zhihao,Li Hongbin,Liu Litao.Ferrite refinement preparation based on coupling of warm deformation and reversal transformation[J].Heat Treatment of Metals,2023,48(4):35-39.
Authors:Wang Zhihao  Li Hongbin  Liu Litao
Affiliation:1. College of Metallurgy and Energy, North China University of Science and Technology, Tangshan Hebei 063210, China;2. Hebei Jinxi Iron & Steel Group Co., Ltd., Tangshan Hebei 064302, China
Abstract:Refinements of austenite and ferrite grains in a medium carbon steel were studied by multi-pass warm deformation at 650 ℃ by Gleeble-3500 thermal simulation machine, and characterized by OM, TEM and EBSD. The results show that the 6-passes high strain rate compressive deformation induces austenite reversal transformation, and the mean grain diameter of austenite is 3.4 μm. During cooling down to 600 ℃ at a rate of 10 ℃/s, the ferrite with mean grain diameter of about 0.64 μm is formed from the reversed austenite, and the cementite particles are distributed in the ferrite matrix.
Keywords:medium carbon steel  warm deformation  reversal transformation induced by deformation  grain refinement  spheroidized cementite  
点击此处可从《金属热处理》浏览原始摘要信息
点击此处可从《金属热处理》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号