首页 | 官方网站   微博 | 高级检索  
     

半固态2024合金部分重熔新工艺与组织演变
引用本文:王顺成,李元元,陈维平,郑小平.半固态2024合金部分重熔新工艺与组织演变[J].稀有金属材料与工程,2009,38(Z1).
作者姓名:王顺成  李元元  陈维平  郑小平
作者单位:华南理工大学,广东,广州,510640
基金项目:中国博士后科学基金,华南理工大学博士后创新科学基金 
摘    要:提出半固态坯料先在液相线以上某温度适当等温加热,然后再降低温度至两相区继续等温保温的两步法部分重熔新工艺.采用该工艺对低过热度浇注半固态2024合金坯料进行部分重熔试验,利用光学显微镜和金相图像分析系统,研究了坯料组织演变规律,并与两相区等温部分重熔工艺进行了比较.结果表明,采用两步法部分重熔工艺.由于坯料升温速度加快和熔化过热温度提高,抑制了晶间共晶相的溶解扩散,晶间液相形成速度明显加快,对晶粒合并长大具有一定的抑制作用,并加速晶粒球化,坯料部分重熔后,晶粒更加细小和圆整.

关 键 词:半固态金属  触变成形  部分重熔  组织演变

Novel Partial Remelting Process and Microstructure Evolution of Semi-Solid 2024 Alloy
Wang Shuncheng,Li Yuanyuan,Chen Weiping,Zheng Xiaoping.Novel Partial Remelting Process and Microstructure Evolution of Semi-Solid 2024 Alloy[J].Rare Metal Materials and Engineering,2009,38(Z1).
Authors:Wang Shuncheng  Li Yuanyuan  Chen Weiping  Zheng Xiaoping
Affiliation:Wang Shuncheng,Li Yuanyuan,Chen Weiping,Zheng Xiaoping (South China University of Technology,Guangzhou 510640,China)
Abstract:A two-step partial remelting process was proposed and applied to perform partial remelting experiments on the semi-solid 2024 alloy billet prepared by low superheat pouring. In this process,the semi-solid billet was firstly heated isothermally over liquids temperature for a few seconds,and then held isothermally at solidus-liquidus zone temperature. The microstructure evolution of the semi-solid billet during the two-step partial remelting process was studied and compared with that during isothermal partial...
Keywords:semi-solid metal  thixoforming  partial remelting  microstructure evolution  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号