|
|||||
|
|
| 新型活塞式中心抛撒机构的内弹道仿真研究 | |
| 引用本文： | 郭锦炎,王浩,黄明,张丁山,王岗罡.新型活塞式中心抛撒机构的内弹道仿真研究[J].兵工学报,2013,34(2):149-153. |
| 作者姓名： | 郭锦炎 王浩 黄明 张丁山 王岗罡 |
| 作者单位： | 北京航天发射技术研究所,北京,100076;南京理工大学能源与动力工程学院,江苏南京,210094;西安近代化学研究所,陕西西安,710065;中国运载火箭技术研究院211厂军代表室,北京,100076 |
| 摘 要： | 为了保证子弹在低过载抛撒环境下能得到较高的子弹抛撒速度，设计了一种新型的活塞式中心抛撒机构，对这种抛撒机构的工作过程进行了研究。这种新型活塞式中心抛撒机构通过带有斜面的弹托来传递活塞对子弹的推力，高压室燃烧低压室做功等方式，降低了初始的推力峰值，实现抛撒过程的低过载。根据此种抛撒机构的工作原理，对活塞、弹托及子弹等进行受力分析，建立了此种抛撒机构的内弹道模型，采用此模型对其内弹道性能进行仿真研究。计算得出，该种新型抛撒机构能提供大于50m/s的抛撒速度并将子弹过载控制在1000g以下。所建立的内弹道模型对此种新型活塞中心抛撒机构的设计具有参考意义。 |
| 关 键 词： | 兵器科学与技术 内弹道 子母弹 中心抛撒 活塞 |
A Simulation Study of the Interior Ballistics of the New Piston Central Dispersing Machine |
|
| GUO Jin-yan , WANG Hao , HUANG Ming , ZHANG Ding-shan , WANG Gang-gang.A Simulation Study of the Interior Ballistics of the New Piston Central Dispersing Machine[J].Acta Armamentarii,2013,34(2):149-153. | |
| Authors: | GUO Jin-yan WANG Hao HUANG Ming ZHANG Ding-shan WANG Gang-gang |
| Affiliation: | 1Beijing Institute of Space Launch Technology, Beijing 100076, China; 2School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China; 3Xian Modern Chemistry Research Institute, Xian 710065, Shaanxi, China; 4Militarg Representative Office in Factory No.211, China Academy of Launch Vehicle Technology, Beijing 100076, China |
| Abstract: | In order to ensure high dispersing velocity of the submunitions in the low overload dispersing environment, a new piston central dispersing mechanism was devised and working process of the dispersing mechanism was researched. The characters of this kind of mechanism were as follows: the trust force from the piston to the submunition was transmitted by the beveled sabot; the powder burned in the high pressure chamber and the generated powder gas did work in the low pressure chamber; the initial trust peak was reduced, and so on. According to the working principle of the piston central dispersing mechanism, the force analysis of piston, sabot and submunitions were carried out, and the interior ballistics model of the new mechanism was established. It is proved by the simulation calculation that, this new piston central dispersing mechanism not only can supply a dispersing velocity more than 50m/s, but also can control the overload of submunitions under 1000g. The interior ballistics model can be used to guide the design of the new piston central dispersing mechanism. |
| Keywords: | ordnance science and technology interior ballistic cluster munition central dispersing piston |
| 本文献已被 万方数据 等数据库收录！ | |
| 点击此处可从《兵工学报》浏览原始摘要信息 | |
| 点击此处可从《兵工学报》下载全文 | |
