| 基于美国标准的桩基竖向承载力计算分析 |
| |
| 引用本文： | 霍知亮,,孙立强,郎瑞卿,于长一,牛增祥.基于美国标准的桩基竖向承载力计算分析[J].建筑科学与工程学报,2021,0(6):25-32. |
| |
| 作者姓名： | 霍知亮 孙立强 郎瑞卿 于长一 牛增祥 |
| |
| 作者单位： | (1. 天津大学 建筑工程学院,天津 300072; 2. 天津市政工程设计研究总院有限公司,天津 300051;3. 天津城建大学 天津市软土特性与工程环境重点实验室,天津 300384; 4. 中交天津港湾工程研究院有限公司,天津 300222; 5. 中国土木工程集团有限公司,北京 100071) |
| |
| 摘 要： | 为了进一步提高中国海外项目质量,阐述了美国国家公路与运输协会桥梁设计规范AASHTO LRFD方法和基于静力触探试验的LCPC桩基础承载力计算方法,对比分析了中国标准与美国标准桩基承载力设计方法的异同。根据海外某工程的计算示例和对比分析,得到了不同桩基竖向承载力计算方法的结果及其规律。结果表明:AASHTO LRFD法和基于静力触探试验的LCPC法计算的桩基承载力较为接近; 《公路桥涵地基与基础设计规范》由于其桩摩阻力标准值较小,桩端在砂性土中承载力容许值存在限制等因素的影响,其计算得出的桩侧摩阻力和桩端阻力均较小; 采用AASHTO LRFD方法时,地下水位埋深和标准贯入试验等原位测试结果对计算结果影响较大; 基于美国标准的海外项目勘察侧重原位测试结果,在勘察外业工作中应重视其操作的标准性。
|
| 关 键 词： | 美国标准 桩基 静力触探试验 极限承载力 |
Analysis of Vertical Bearing Capacity of Pile Foundation Based on American Standard |
| |
| HUO Zhi-liang,,SUN Li-qiang,LANG Rui-qing,YU Chang-yi,NIU Zeng-xiang.Analysis of Vertical Bearing Capacity of Pile Foundation Based on American Standard[J].Journal of Architecture and Civil Engineering,2021,0(6):25-32. |
| |
| Authors: | HUO Zhi-liang SUN Li-qiang LANG Rui-qing YU Chang-yi NIU Zeng-xiang |
| |
| Affiliation: | (1. School of Civil Engineering, Tianjin University, Tianjin 300072, China; 2. Tianjin Municipal Engineering Design and Research Institute Co., Ltd., Tianjin 300051, China; 3. Key Laboratory of Soft Soil Engineering Characteristics and Engineering Environment of Tianjin, Tianjin Chengjian University, Tianjin 300384, China; |
| |
| Abstract: | In order to further improve the quality of China's overseas projects, the bearing capacity calculation methods of AASHTO LRFD method and LCPC method based on static cone penetration test were expounded. The similarities and differences of pile foundation bearing capacity design methods between Chinese standards and American standards were compared and analyzed. According to the calculation example and comparative analysis of an overseas project, the results of different pile foundation vertical bearing capacity calculation methods were obtained. The results show that the pile foundation bearing capacity calculated by AASHTO LRFD method and LCPC method based on static cone penetration test are close. Due to the small standard value of pile friction and the limitation of allowable value of pile end bearing capacity in sandy soil, the calculated pile side friction and end resistance are small based on Specifications for Design of Foundation of Highway Bridges and Culverts. Through the analysis, it is also obtained that the in-situ test results such as groundwater buried depth and standard penetration test have great influences on the calculation results by using AASHTO LRFD method. The overseas project geotechnical investigation based on American standard focuses on the in-situ test results, and attention should be paid to the standardization of its operation in the field work. |
| |
| Keywords: | American standard pile foundation static cone penetration test ultimate bearing capacity |
|
| 点击此处可从《建筑科学与工程学报》浏览原始摘要信息 |
|
点击此处可从《建筑科学与工程学报》下载全文 |
|
