首页 | 官方网站   微博 | 高级检索  
     

湖南宝山铜铅锌多金属矿床成矿元素分带特征及地质意义
引用本文:齐钒宇,张志,祝新友,李永胜,甄世民,公凡影,巩小栋.湖南宝山铜铅锌多金属矿床成矿元素分带特征及地质意义[J].矿产勘查,2017,8(3):358-365.
作者姓名:齐钒宇  张志  祝新友  李永胜  甄世民  公凡影  巩小栋
作者单位:中国地质调查局发展研究中心,北京 100037;全国地质资料馆,北京 100037,中国地质调查局发展研究中心,北京 100037,北京矿产地质研究院,北京 100012,中国地质调查局发展研究中心,北京 100037;国土资源部矿产勘查技术指导中心,北京 100120,中国地质调查局发展研究中心,北京 100037;国土资源部矿产勘查技术指导中心,北京 100120,中国地质调查局发展研究中心,北京 100037;国土资源部矿产勘查技术指导中心,北京 100120,中国地质调查局成都地质调查中心,成都 610081
基金项目:全国危机矿山接替资源找矿项目(编号:20089927)资助。
摘    要:宝山铜铅锌多金属矿床位于我国南岭成矿带中段北缘,该矿床具有明显的水平分带性,即以花岗闪长斑岩为中心的铜钼矿化,周边是铅锌银矿化。成矿元素比值在垂向上也具有明显的分带性。Cu/Mo比值在花岗闪长斑岩岩体中呈现低值,在岩体上盘夕卡岩中值较高。Pb/Zn比值在宝山北部脉状矿体呈现下部比值低,向上比值逐步增高的特点。在宝山西部矿体中,一部分为下部比值高,上部比值低;另一部分为下部比值低,上部比值高,可能是由于测水组砂页岩盖层的影响,成矿热液部分被阻挡反向,向下运移成矿。推测宝山铜铅锌多金属矿床成矿热液运移主要通道为断裂构造,夕卡岩期成矿热液沿F_0断层上涌,硫化物期成矿热液沿F_(21)、F_(25)等断层上涌。宝山铜铅锌多金属矿床以铜钼矿与铅锌银矿为两个中心,表现为两个控矿构造,进而推测宝山铜铅锌多金属矿床铜钼矿与铅锌银矿形成于两个阶段。

关 键 词:成矿元素  宝山  铜铅锌多金属矿  湖南
收稿时间:2016/4/29 0:00:00

Zoning characteristics of ore-forming elements and geological significance of Baoshan Cu-Pb-Zn polymetallic deposit in Hunan
QI Fan-yu,ZHANG Zhi,ZHU Xin-you,LI Yong-sheng,ZHEN Shi-min,GONG Fan-ying and GONG Xiao-dong.Zoning characteristics of ore-forming elements and geological significance of Baoshan Cu-Pb-Zn polymetallic deposit in Hunan[J].Mineral Exploration,2017,8(3):358-365.
Authors:QI Fan-yu  ZHANG Zhi  ZHU Xin-you  LI Yong-sheng  ZHEN Shi-min  GONG Fan-ying and GONG Xiao-dong
Affiliation:Development and Research Center,China Geological Survey,Beijing 100037;National Geological Archives,Beijing 100037,Development and Research Center,China Geological Survey,Beijing 100037,Beijing Institute of Geology for Mineral Resources,Beijing 100012,Development and Research Center,China Geological Survey,Beijing 100037;Mineral Exploration Technical Guidance Center under Ministry of Land and Resources,Beijing 100120,Development and Research Center,China Geological Survey,Beijing 100037;Mineral Exploration Technical Guidance Center under Ministry of Land and Resources,Beijing 100120,Development and Research Center,China Geological Survey,Beijing 100037;Mineral Exploration Technical Guidance Center under Ministry of Land and Resources,Beijing 100120 and Chengdu Center of China Geological Survey,Chengdu 610081
Abstract:The Baoshan Cu-Pb-Zn polymetallic deposit located in the central Nanling mineralization zone,is an important polymetallic deposit type. The Baoshan deposit has obvious horizontal mineralization zoning, i.e., Cu-Mo mineralization in the center of porphyritic granodiorite intursion to Pb-Zn-Ag mineralization in the periphery area. Also, there is obvious vertical zoning of ore-forming element ratio.The Cu/Mo ratio is low within granodiorite porphyry and extremely high in endoskarn, the hanging wall of the intrusion.The Pb/Zn ratio is low in the lower part and increasing higher in the upper part of vein ore bodies in the northern area.However, in the western mining area,the distribution of Pb/Zn ratio varied in vein ore bodies, i.e., the ratio is low in the lower part of some vein bodies and high in the lower part within other vein ore bodies, which can be explained by the cover effect of sandstone shale of Ceshui formation that blocked the ore-forming fluid upward and forced to move downward and deposited in the bottom part.Thus, it was inferred that the fault structure is the main movement channel of ore-forming hydrothermal fluid. During the skarn metallogenic period,the ore-bearing hydrothermal solution rises through the F0 fault while through F21and F25 faults in the sulfurization period. Therefore, there are two mineralization centers in the deposit area, i.e., Cu-Mo mineralization center and Pb-Zn-Ag mineralization center which were controlled by different structures.So there are two periods of mineralization, i.e., Cu-Mo mineralization and Pb-Zn-Ag mineralization periods.
Keywords:ore-forming elements  Baoshan  Cu-Pb-Zn polymetallic deposit  Hunan
本文献已被 CNKI 等数据库收录!
点击此处可从《矿产勘查》浏览原始摘要信息
点击此处可从《矿产勘查》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号