| 核电厂设备闸门外压极限承载特性研究 |
| |
| 引用本文： | 杜坤,左永德,袁亮.核电厂设备闸门外压极限承载特性研究[J].核动力工程,2020,41(6):106-110. |
| |
| 作者姓名： | 杜坤 左永德 袁亮 |
| |
| 作者单位： | 中广核工程有限公司核电安全监控技术与装备国家重点实验室,广东深圳,518172,中广核工程有限公司核电安全监控技术与装备国家重点实验室,广东深圳,518172,苏州热工院有限公司,广东深圳,518120 |
| |
| 摘 要： | 采用有限元分析方法对设备闸门外压极限承载特性进行研究。在ANSYS程序中建立参数化计算模型，通过非线性屈曲分析得到设备闸门封头的外压极限载荷。计算结果与经验公式结果相近，验证了有限元分析方法的可靠有效性。对影响外压极限承载特性的设计参数进行了敏感性研究，总结出其影响变化规律。优化设计示例表明该研究方法具有实用性，可为设备闸门的结构设计提供优化方案。
|
| 关 键 词： | 有限元 设备闸门 极限载荷 ANSYS 非线性屈曲分析 |
Research of Ultimate Bearing Characteristics for Equipment Hatch of Nuclear Power Plant under External Pressure |
| |
| Du Kun,Zuo Yongde,Yuan Liang.Research of Ultimate Bearing Characteristics for Equipment Hatch of Nuclear Power Plant under External Pressure[J].Nuclear Power Engineering,2020,41(6):106-110. |
| |
| Authors: | Du Kun Zuo Yongde Yuan Liang |
| |
| Abstract: | The ultimate bearing characteristics of the equipment hatch under the external pressure was studied by the finite element analysis method. The parametric calculation model was established in ANSYS, and the external pressure ultimate load of the equipment gate head was obtained by nonlinear buckling analysis. The calculated results were similar to those of the empirical formula, which verified the reliability and effectiveness of the finite element analysis method. The sensitivity of the design parameters affecting the ultimate bearing characteristics of the external pressure was studied, and the changing law of the influence was summarized. The example of the optimization design showed the practicability of the research method and could provide the optimization scheme for the structural design of the equipment hatch. |
| |
| Keywords: | |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《核动力工程》浏览原始摘要信息 |
|
点击此处可从《核动力工程》下载全文 |
|
