| 计及陀螺效应的高速齿轮轴系涡动现象及临界转速分析 |
| |
| 引用本文： | 程浩,张爱强,倪德,钟团结.计及陀螺效应的高速齿轮轴系涡动现象及临界转速分析[J].机械科学与技术(西安),2023,42(2):173-180. |
| |
| 作者姓名： | 程浩 张爱强 倪德 钟团结 |
| |
| 作者单位： | 1.重庆大学 机械传动国家重点实验室，重庆 400044 |
| |
| 基金项目： | 国家自然科学基金项目（51775058）与国家重点研发计划（2020YFB2008101） |
| |
| 摘 要： | 高速齿轮轴系由于不平衡量等因素受陀螺效应会产生较大弯矩存在潜在共振危险，计及转轴及齿轮轮体陀螺效应，分别采用梁单元法和有限元法建立某型共轴高速直升机传动系统高速输入轴系模型，系统研究高速齿轮轴系不同振型的涡动现象，结合临界转速坎贝尔图，对比自由与约束模态和约束模态下不同轴承刚度对临界转速数值影响。结果表明：高速齿轮轴系扭转和伸缩振型在自由及约束模态均不会产生涡动，弯曲、节径等横向振型产生明显涡动现象，且在约束模态下涡动现象减弱；临界转速数值随约束模态轴承刚度增加呈增大趋势。在高速齿轮轴系临界转速准确计算中，轴承刚度及陀螺效应影响不可忽视。
|
| 关 键 词： | 高速齿轮轴系 陀螺效应 涡动现象 轴承刚度 临界转速 |
| 收稿时间： | 2021-03-24 |
Analyzing Vortex Phenomenon of High-speed Gear Shafting System and Its Critical Speed with Gyroscopic Effect Considered |
| |
| Affiliation: | 1.State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing 400044, China2.AECC Hunan Aviation Powerplant Research Institute, Zhuzhou 412000, Hu′nan, China |
| |
| Abstract: | Due to the unbalance quantity factors ofa high-speed gear shafting system,its gyroscopic effect may generate a large bending moment and cause potentially dangerous resonance. The high-speed input shafting model of a certain type of coaxial high-speed helicopter′s transmission system was established with the beam element method and the finite element method respectively. The vortex phenomenon of the high-speed gear shafting system with different vibration modes was systematically studied. Combined with its critical speed Campbell diagram, the freedom iscompared with the constraint modal under different influences of bearing stiffness on the critical speed value. The results show that the torsion and expansion modes of the high-speed gear shafting system do not produce vortices in free and constrained modes, while the transverse modes such as bendingdiameter and pitch diameter generate significant vortices, which are weakened in the constrained mode. The value of critical speed increases with the increase of the bearing stiffness of constrained modal. The critical speed of the high-speed shafting system can be accurately calculated with the bearing stiffness and the gyroscopic effect considered. |
| |
| Keywords: | |
|
| 点击此处可从《机械科学与技术(西安)》浏览原始摘要信息 |
|
点击此处可从《机械科学与技术(西安)》下载全文 |
