Self‐Healing Hydrogels

Over the past few years, there has been a great deal of interest in the development of hydrogel materials with tunable structural, mechanical, and rheological properties, which exhibit rapid and autonomous self‐healing and self‐recovery for utilization in a broad range of applications, from soft robotics to tissue engineering. However, self‐healing hydrogels generally either possess mechanically robust or rapid self‐healing properties but not both. Hence, the development of a mechanically robust hydrogel material with autonomous self‐healing on the time scale of seconds is yet to be fully realized. Here, the current advances in the development of autonomous self‐healing hydrogels are reviewed. Specifically, methods to test self‐healing efficiencies and recoveries, mechanisms of autonomous self‐healing, and mechanically robust hydrogels are presented. The trends indicate that hydrogels that self‐heal better also achieve self‐healing faster, as compared to gels that only partially self‐heal. Recommendations to guide future development of self‐healing hydrogels are offered and the potential relevance of self‐healing hydrogels to the exciting research areas of 3D/4D printing, soft robotics, and assisted health technologies is highlighted.     

Tough and Water‐Insensitive Self‐Healing Elastomer for Robust Electronic Skin

An electronic (e‐) skin is expected to experience significant wear and tear over time. Therefore, self‐healing stretchable materials that are simultaneously soft and with high fracture energy, that is high tolerance of damage or small cracks without propagating, are essential requirements for the realization of robust e‐skin. However, previously reported elastomers and especially self‐healing polymers are mostly viscoelastic and lack high mechanical toughness. Here, a new class of polymeric material crosslinked through rationally designed multistrength hydrogen bonding interactions is reported. The resultant supramolecular network in polymer film realizes exceptional mechanical properties such as notch‐insensitive high stretchability (1200%), high toughness of 12 000 J m^?2, and autonomous self‐healing even in artificial sweat. The tough self‐healing materials enable the wafer‐scale fabrication of robust and stretchable self‐healing e‐skin devices, which will provide new directions for future soft robotics and skin prosthetics.     

Self‐Healing Inside APbBr3 Halide Perovskite Crystals

Self‐healing, where a modification in some parameter is reversed with time without any external intervention, is one of the particularly interesting properties of halide perovskites. While there are a number of studies showing such self‐healing in perovskites, they all are carried out on thin films, where the interface between the perovskite and another phase (including the ambient) is often a dominating and interfering factor in the process. Here, self‐healing in perovskite (methylammonium, formamidinium, and cesium lead bromide (MAPbBr₃, FAPbBr₃, and CsPbBr₃)) single crystals is reported, using two‐photon microscopy to create damage (photobleaching) ≈110 µm inside the crystals and to monitor the recovery of photoluminescence after the damage. Self‐healing occurs in all three perovskites with FAPbBr₃ the fastest (≈1 h) and CsPbBr₃ the slowest (tens of hours) to recover. This behavior, different from surface‐dominated stability trends, is typical of the bulk and is strongly dependent on the localization of degradation products not far from the site of the damage. The mechanism of self‐healing is discussed with the possible participation of polybromide species. It provides a closed chemical cycle and does not necessarily involve defect or ion migration phenomena that are often proposed to explain reversible phenomena in halide perovskites.     

Microfluidics‐Assisted Assembly of Injectable Photonic Hydrogels toward Reflective Cooling

Development of fast curing and easy modeling of colloidal photonic crystals is highly desirable for various applications. Here, a novel type of injectable photonic hydrogel (IPH) is proposed to achieve self‐healable structural color by integrating microfluidics‐derived photonic supraballs with supramolecular hydrogels. The supramolecular hydrogel is engineered via incorporating β‐cyclodextrin/poly(2‐hydroxypropyl acrylate‐co‐N‐vinylimidazole) (CD/poly(HPA‐co‐VI)) with methacrylated gelatin (GelMA), and serves as a scaffold for colloidal crystal arrays. The photonic supraballs derived from the microfluidics techniques, exhibit excellent compatibility with the hydrogel scaffolds, leading to enhanced assembly efficiency. By virtue of hydrogen bonds and host–guest interactions, a series of self‐healable photonic hydrogels (linear, planar, and spiral assemblies) can be facilely assembled. It is demonstrated that the spherical symmetry of the photonic supraballs endows them with identical optical responses independent of viewing angles. In addition, by taking the advantage of angle independent spectrum characteristics, the IPH presents beneficial effects in reflective cooling, which can achieve up to 17.4 °C in passive solar reflective cooling. The strategy represents an easy‐to‐perform platform for the construction of IPH, providing novel insights into macroscopic self‐assembly toward thermal management applications.     

Healable and Mechanically Super‐Strong Polymeric Composites Derived from Hydrogen‐Bonded Polymeric Complexes

It is challenging to fabricate mechanically super‐strong polymer composites with excellent healing capacity because of the significantly limited mobility of polymer chains. The fabrication of mechanically super‐strong polymer composites with excellent healing capacity by complexing polyacrylic acid (PAA) with polyvinylpyrrolidone (PVPON) in aqueous solution followed by molding into desired shapes is presented. The coiled PVPON can complex with PAA in water via hydrogen‐bonding interactions to produce transparent PAA–PVPON composites homogenously dispersed with nanoparticles of PAA–PVPON complexes. As healable materials, the PAA–PVPON composite materials with a glass transition temperature of ≈107.9 °C exhibit a super‐high mechanical strength, with a tensile strength of ≈81 MPa and a Young's modulus of ≈4.5 GPa. The PAA–PVPON composites are stable in water because of the hydrophobic interactions among pyrrolidone groups. The super‐high mechanical strength of the PAA–PVPON composite materials originates from the highly dense hydrogen bonds between PAA and PVPON and the reinforcement of in situ formed PAA–PVPON nanoparticles. The reversibility of the relatively weak but dense hydrogen bonds enables convenient healing of the mechanically strong PAA–PVPON composite materials from physical damage to restore their original mechanical strength.