Conjugated Polymer Nanoparticle–Graphene Oxide Charge‐Transfer Complexes

The game‐changing role of graphene oxide (GO) in tuning the excitonic behavior of conjugated polymer nanoparticles is described for the first time. This is demonstrated by using poly(3‐hexylthiophene) (P3HT) as a benchmark conjugated polymer and employing an in situ reprecipitation approach resulting in P3HT nanoparticles (P3HT_NPs) with sizes of 50–100 nm in intimate contact with GO. During the self‐assembly process, GO changes the crystalline packing of P3HT chains in the forming P3HT_NPs from H to H/J aggregates exhibiting exciton coupling constants as low as 2 meV, indicating favorable charge separation along the P3HT chains. Concomitantly, π–π interface interactions between the P3HT_NPs and GO sheets are established resulting in the creation of P3HT_NPs–GO charge‐transfer complexes whose energy bandgaps are lowered by up to 0.5 eV. Moreover, their optoelectronic properties, preestablished in the liquid phase, are retained when processed into thin films from the stable aqueous dispersions, thus eliminating the critical dependency on external processing parameters. These results can be transferred to other types of conjugated polymers. Combined with the possibility of employing water based “green” processing technologies, charge‐transfer complexes of conjugated polymer nanoparticles and GO open new pathways for the fabrication of improved optoelectronic thin film devices.     

Scalable One‐Step Wet‐Spinning of Graphene Fibers and Yarns from Liquid Crystalline Dispersions of Graphene Oxide: Towards Multifunctional Textiles

Key points in the formation of liquid crystalline (LC) dispersions of graphene oxide (GO) and their processability via wet‐spinning to produce long lengths of micrometer‐dimensional fibers and yarns are addressed. Based on rheological and polarized optical microscopy investigations, a rational relation between GO sheet size and polydispersity, concentration, liquid crystallinity, and spinnability is proposed, leading to an understanding of lyotropic LC behavior and fiber spinnability. The knowledge gained from the straightforward formulation of LC GO “inks” in a range of processable concentrations enables the spinning of continuous conducting, strong, and robust fibers at concentrations as low as 0.075 wt%, eliminating the need for relatively concentrated spinning dope dispersions. The dilute LC GO dispersion is proven to be suitable for fiber spinning using a number of coagulation strategies, including non‐solvent precipitation, dispersion destabilization, ionic cross‐linking, and polyelectrolyte complexation. One‐step continuous spinning of graphene fibers and yarns is introduced for the first time by in situ spinning of LC GO in basic coagulation baths (i.e., NaOH or KOH), eliminating the need for post‐treatment processes. The thermal conductivity of these graphene fibers is found to be much higher than polycrystalline graphite and other types of 3D carbon based materials.     

Polyoxometalate‐Modified Sponge‐Like Graphene Oxide Monolith with High Proton‐Conducting Performance

Graphene oxide (GO) contains abundant oxygen‐containing functional groups acting as hydrogen bond acceptors for proton conduction on its basal plane. However, the dilemma in realizing bulk in‐plane conduction and the metastability at room temperature of GO films both obstruct its application. Polyoxometalate‐modified sponge‐like GO monolith (PEGO) with 3D cross‐linking inner structure, which exhibits unique “shrink‐expand” effect to polar solvent, are synthesized. Owing to the introduction of polyoxometalates and the replacement of unstable epoxy groups by ethylenediamine, PEGO exhibits hitherto the highest proton conductivity under low relative humidity (1.02 × 10^?2 S cm^?1 at 60% relative humidity) and excellent long‐term stability (more than 1 month). The outstanding conductivity originates from 3D transporting pathways, high‐density hopping sites, and eliminated grain boundary resistance. This study provides a practical way to design GO‐based proton‐conducting material dominated by in‐plane diffusion.     

Ultrafast Fabrication of Covalently Cross‐linked Multifunctional Graphene Oxide Monoliths

Stable graphene oxide monoliths (GOMs) have been fabricated by exploiting epoxy groups on the surface of graphene oxide (GO) in a ring opening reaction with amine groups of poly(oxypropylene) diamines (D₄₀₀). This method can rapidly form covalently bonded GOM with D₄₀₀ within 60 s. FTIR and XPS analyses confirm the formation of covalent C‐N bonds. Investigation of the GOM formation mechanism reveals that the interaction of GO with a diamine cross‐linker can result in 3 different GO assemblies depending on the ratio of D₄₀₀ to GO, which have been proven both by experiment and molecular dynamics calculations. Moreover, XRD results indicate that the interspacial distance between GO sheets can be tuned by varying the diamine chain length and concentration. We demonstrate that the resulting GOM can be moulded into various shapes and behaves like an elastic hydrogel. The fabricated GOM is non‐cyctotoxic to L929 cell lines indicating a potential for biomedical applications. It could also be readily converted to graphene monolith upon thermal treatment. This new rapid and facile method to prepare covalently cross‐linked GOM may open the door to the synthesis and application of next generation multifunctional 3D graphene structures.     

Self‐Healing Reduced Graphene Oxide Films by Supersonic Kinetic Spraying

The industrial scale application of graphene and other functional materials in the field of electronics has been limited by inherent defects, and the lack of simple deposition methods. A simple spray deposition method is developed that uses a supersonic air jet for a commercially available reduced graphene oxide (r‐GO) suspension. The r‐GO flakes are used as received, which are pre‐annealed and pre‐hydrazine‐treated, and do not undergo any post‐treatment. A part of the considerable kinetic energy of the r‐GO flakes entrained by the supersonic jet is used in stretching the flakes upon impact with the substrate. The resulting “frozen elastic strains” heal the defects (topological defects, namely Stone‐Wales defect and C₂ vacancies) in the r‐GO flakes, which is reflected in the reduced ratio of the intensities of the D and G bands in the deposited film. The defects can also be regenerated by annealing.     

Self‐Healing Graphene Oxide Based Functional Architectures Triggered by Moisture

Self‐healing materials are capable of spontaneously repairing themselves at damaging sites without additional adhesives. They are important functional materials with wide applications in actuators, shape memorizing materials, smart coatings, and medical treatments, etc. Herein, this study reports the self‐healing of graphene oxide (GO) functional architectures and devices with the assistance of moisture. These GO architectures can completely restore their mechanical‐performance (e.g., compressibility, flexibility, and strength) after healing their broken sites using a little amount of water moisture. On the basis of this effective moisture‐triggered self‐healing process, this study develops GO smart actuators (e.g., bendable actuator, biomimetic walker, rotatable fiber motor) and sensors with self‐healing ability. This work provides a new pathway for the development of self‐healing materials for their applications in multidimensional spaces and functional devices.     

Seriography‐Guided Reduction of Graphene Oxide Biopapers for Wearable Sensory Electronics

Novel nacre‐mimic bio‐nanocomposites, such as graphene‐based laminates, are pushing the boundaries of strength and toughness as flexible engineering materials. Translating these material advances to functional flexible electronics requires methods for generating print‐scalable microcircuits (conductive elements surrounded by dielectric) into these strong, tough, lightweight bio‐nanocomposites. Here, a new paradigm for printing flexible electronics by employing facile, eco‐friendly seriography to confine the reduction of graphene oxide biopapers reinforced by silk interlayers is presented. Well‐defined, micropatterned regions on the biopaper are chemically reduced, generating a 10⁶ increase in conductivity (up to 10⁴ S m^?1). Flexible, robust graphene‐silk circuits are showcased in diverse applications such as resistive moisture sensors and capacitive proximity sensors. Unlike conductive (i.e., graphene‐ or Ag nanoparticle‐loaded) inks printed onto substrates, seriography‐guided reduction does not create mechanically weak interfaces between dissimilar materials and does not require the judicious formation of ink. The unimpaired functionality of printed‐in graphene‐silk microcircuits after thousands of punitive folding cycles and chemical attack by harsh solvents is demonstrated. This novel approach provides a low‐cost, portable solution for printing micrometer‐scale conductive features uniformly across large areas (>hundreds of cm²) in layered composites for applications including wearable health monitors, electronic skin, rollable antennas, and conformable displays.     

Structure‐Properties Relationship in Iron Oxide‐Reduced Graphene Oxide Nanostructures for Li‐Ion Batteries

Non‐aqueous sol‐gel routes involving the reaction of metal oxide precursors in organic solvents (e.g., benzyl alcohol) at moderate temperature and pressure, offer advantages such as high purity, high reproducibility and the ability to control the crystal growth without the need of using additional ligands. In this paper, a study carried out on a series of iron oxide/reduced graphene oxide composites is presented to elucidate a structure‐properties relationship leading to an improved electrochemical performance of such composites. Moreover, it is demonstrated that the easy production of the composites in a variety of temperature and composition ranges, allows a fine control over the final particles size, density and distribution. The materials obtained are remarkable in terms of the particle's size homogeneity and dispersion onto the reduced graphene oxide surface. Moreover, the synthesis method used to obtain the graphene oxide clearly affects the performances of the final composites through the control of the restacking of the reduced graphene oxide sheets. It is shown that a homogeneous and less defective reduced graphene oxide enables good electrochemical performances even at high current densities (over 500 mAh/g delivered at current densities as high as 1600 mA/g). The electrochemical properties of improved samples reach the best compromise between specific capacity, rate capability and cycle stability reported so far.     

pH‐Responsive Cyanine‐Grafted Graphene Oxide for Fluorescence Resonance Energy Transfer‐Enhanced Photothermal Therapy

Stimuli‐responsive anticancer agents are of particular interest in the field of cancer therapy. Nevertheless, so far stimuli‐responsive photothermal agents have been explored with limited success for cancer photothermal therapy (PTT). In this work, as a proof‐of‐concept, a pH‐responsive photothermal nanoconjugate for enhanced PTT efficacy, in which graphene oxide (GO) with broad NIR absorbance and effective photothermal conversion efficiency is selected as a typical model receptor of fluorescence resonance energy transfer (FRET), and grafted cyanine dye (e.g., Cypate) acts as the donor of near‐infrared fluorescence (NIRF), is reported for the first time. The conjugate of Cypate‐grafted GO exhibits different conformations in aqueous solutions at various pH, which can trigger pH‐dependent FRET effect between GO and Cypate and thus induce pH‐responsive photothermal effect of GO‐Cypate. GO‐Cypate exhibits severe cell damage owing to the enhanced photothermal effect in lysosomes, and thus generate synergistic PTT efficacy with tumor ablation upon photoirradiation after a single‐dose intravenous injection. The photothermal nanoconjugate with broad NIR absorbance as the effective receptor of FRET can smartly convert emitted NIRF energy from donor cyanine dye into additional photothermal effect for improving PTT. These results suggest that the smart nanoconjugate can act as a promising stimuli‐responsive photothermal nanoplatform for cancer therapy.     

Revisiting the Structure of Graphene Oxide for Preparing New‐Style Graphene‐Based Ultraviolet Absorbers

Despite sustained effort over the years, the exploration of an effective strategy toward understanding the structure and properties of graphene oxide (GO) is still highly desirable. Herein, a facile route to revisit the structure of GO is demonstrated by elucidating its chemical‐conversion process solely in the presence of ammonia. Such a strategy can contribute to settling some arguments in recent models of GO, and also offers a prerequisite to identify critical components that can act as ultraviolet absorbers (UVAs) in resulting dispersions of nitrogen‐doped graphene sheets (NGSs). Inspired by this, for the first time, the performance of NGSs, serving as new‐style UVAs, is investigated through directly assessing the effect of NGSs on the photofastness of azo dyes (Food Black). These studies reveal that, distinct from the common understanding, the as‐prepared NGSs can dramatically enhance the photostability of Food Black under UV irradiation and exhibit greatly applied potential as a multifunctional UVA for new‐generation inkjet inks that can simultaneously integrate the advantages of dye‐based and pigment‐based inks.     

Free‐Standing Functionalized Graphene Oxide Solid Electrolytes in Electrochemical Gas Sensors

A free‐standing sulfonic acid functionalized graphene oxide (fSGO)‐based electrolyte film is prepared and used in an electrochemical gas sensor, an alcohol fuel cell sensor (AFCS), for the detection of alcohol. The fSGO electrolyte film‐based AFCS detects ethanol vapor with excellent response, linearity, and sensitivity, since it possesses a high proton conductivity (58 mS cm^?1 at 55 °C). An ethanol detection limit level as low as 25 ppm is achieved and high selectivity for ethanol over acetone is demonstrated. These results do not only show the promising potential of fSGO films in an electrochemical gas sensors, specifically a portable breathalyzer, but also open an alternative pathway to investigate the application of graphene derivatives in the field of gas sensors.     

Thickness Dependence of the Mechanical Properties of Free‐Standing Graphene Oxide Papers

Graphene oxide (GO) papers are candidates for structural materials in modern technology due to their high specific strength and stiffness. The relationship between their mechanical properties and structure needs to be systematically investigated before they can be applied to the broad range fields where they have potential. Herein, the mechanical properties of GO papers with various thicknesses (0.5–100 μm) are investigated using bulge and tensile test methods; this includes the Young's modulus, fracture strength, fracture strain, and toughness. The Young's modulus, fracture strength, and toughness are found to decrease with increasing thickness, with the first two exhibiting differences by a factor of four. In contrast, the fracture strain slightly increases with thickness. Transmission electron, scanning electron, and atomic force microscopy indicate that the mechanical properties vary with thickness due to variations in the inner structure and surface morphology, such as crack formation and surface roughness. Thicker GO papers are weaker because they contain more voids that are produced during the fabrication process. Surface wrinkles and residual stress are found to result in increased fracture strain. Determination of this structure–property relationship provide improved guidelines for the use of GO‐based thin‐film materials in mechanical structures.     

Simultaneous Reduction and Surface Functionalization of Graphene Oxide by Mussel‐Inspired Chemistry

This study presents a method of simultaneous reduction and surface functionalization of graphene oxide by a one‐step poly(norepinephrine) functionalization. The pH‐induced aqueous functionalization of graphene oxide by poly(norepinephrine), a catecholamine polymer inspired by the robust adhesion of marine mussels, chemically reduced and functionalized graphene oxide. Moreover, the polymerized norepinephrine (pNor) layer provided multifunctionality on the reduced graphene oxide that includes surface‐initiated polymerization and spontaneous metallic nanoparticle formation. This facile surface modification strategy can be a useful platform for graphene‐based nano‐composites.     

On‐the‐Spot Immobilization of Quantum Dots,Graphene Oxide,and Proteins via Hydrophobins

Class I hydrophobin Vmh2, a peculiar surface active and versatile fungal protein, is known to self‐assemble into chemically stable amphiphilic films, to be able to change wettability of surfaces, and to strongly adsorb other proteins. Herein, a fast, highly homogeneous and efficient glass functionalization by spontaneous self‐assembling of Vmh2 at liquid–solid interfaces is achieved (in 2 min). The Vmh2‐coated glass slides are proven to immobilize not only proteins but also nanomaterials such as graphene oxide (GO) and quantum dots (QDs). As models, bovine serum albumin labeled with Alexa 555 fluorophore, anti‐immunoglobulin G antibodies, and cadmium telluride QDs are patterned in a microarray fashion in order to demonstrate functionality, reproducibility, and versatility of the proposed substrate. Additionally, a GO layer is effectively and homogeneously self‐assembled onto the studied functionalized surface. This approach offers a quick and simple alternative to immobilize nanomaterials and proteins, which is appealing for new bioanalytical and nanobioenabled applications.     

Near‐Infrared Light‐Driven,Highly Efficient Bilayer Actuators Based on Polydopamine‐Modified Reduced Graphene Oxide

Near‐infrared (NIR) light‐driven bilayer actuators capable of fast, highly efficient, and reversible bending/unbending motions toward periodic NIR light irradiation are fabricated by exploiting the photothermal conversion and humidity‐sensitive properties of polydopamine‐modified reduced graphene oxide (PDA‐RGO). The bilayer actuator comprises a PDA‐RGO layer prepared by a filtration method, and this layer is subsequently spin‐coated with a layer of UV‐cured Norland Optical Adhesive (NOA)‐63. Given the hydrophilicity of PDA, the PDA‐RGO layer can absorb water to swell and lose water to shrink. The intrinsic NIR absorbance of RGO sheets convertes NIR light into thermal energy, which transfers the humidity‐responsive PDA‐RGO layer to be NIR light‐responsive. Considering that the shape of the NOA‐63 layer remains unchanged under NIR light, periodic NIR light irradiation leads to asymmetric shrinkage/expansion of the bilayer, which enables fast and reversible bending/unbending motions of the bilayer actuator. We demonstrate that compared with a poly(ethylenimine)‐modified graphene oxide layer, the PDA‐RGO layer is unique in fabricating highly efficient bilayer actuators. A NIR light‐driven walking device capable of performing quick worm‐like motion on a ratchet substrate is built by connecting two polyethylene terephthalate plates as claws on opposite ends of the PDA‐RGO/NOA‐63 bilayer actuator.