ATMUNI信令的功能划分

ＡＴＭ用户－网络接口（ＵＮＩ）信令采用ＯＳＩ的分层结构,本文首先简要介绍了ＡＴＭＵＮＩ信令协议的体系结构以及各层的功能。然后详细描述了ＵＮＩ信令功能模块的划分,以及各模块的功能。     

宽带ISDN与ATM交换技术第二讲B－ISDN用户－网络接口和协议（下）

宽带ＩＳＤＮ与ＡＴＭ交换技术第二讲Ｂ－ＩＳＤＮ用户－网络接口和协议（下）刘斌（清华大学计算机系北京１０００８４）３ＡＴＭ层前面在介绍ＡＴＭ的基本概念和ＡＴＭ层功能时，已涉及许多有关ＡＴＭ层的内容，这里对一些细节再作补充。简单地讲，ＡＴＭ层的任务就是为...     

OAM mechanisms for BISDN UNI and access networks

This paper clarifies operation and maintenance (OAM) requirements for broadband integrated services digital network (BISDN) customer access systems including user-network interface (UNI), and proposes basic OAM mechanisms. Access networks employ a logical networking architecture based on the asynchronous transfer mode (ATM) virtual path (VP) concept to provide all services efficiently, economically. Services are independent of the network's physical configuration. Thus, OAM functions for the access network are required to support physical and ATM layer capabilities. UNI physical performance and failure information flows to ensure user service quality are described. A fault localization mechanism is introduced that determines whether the failure lies on the network provider side or customer side. It uses failure information flows and loop back testing at the network terminator 1 (NT1). As connection-related virtual path connection (VPC) availability indication is necessary for user-to-network applications and user-to-user applications, two alternative VPC-related availability indication mechanisms are studied. Furthermore, basic performance monitoring mechanisms for ATM layer are described.     

The ATM Forum's private network/network interface

The ATM Forum completed the first version of its private network/network interface (PNNI) in March 1996 and many ATM switch manufacturers are now offering early implementations. PNNI offers a different type of internetwork or internodal interface from the traditional Signalling System No 7 based approach favoured to date by 'public' network operators, such as BT. In spite of its name, however, PNNI may find its place in network service provider networks as well as in 'private' or customer networks. Some of the perceived limitations of the current specification for such an environment are currently being addressed in version 2, tentatively due for completion in the second half of 1998.The PNNI really consists of two parts, a signalling protocol based around the ATM Forum's UNI signalling specification, and a dynamic source routeing protocol. This paper aims to provide an overview of the functionality and mechanics of PNNI, and to compare and contrast with the functionality offered by ITU-T's B-ISUP.     

宽带接入网的体系结构

讨论了宽带接入网的进展 ,论述了宽带接入网及其用户 -网络接口 (U NI)、业务节点接口 (SNI)和电信网管理(Q3)接口 ,并总结了宽带接入网的主要功能以及宽带业务节点接口 (VB5 )标准的主要原则。还例举了多媒体接入体系的实例及其最新发展。     

Internetworking based on cell switch router-architecture andprotocol overview

This paper describes an internetworking architecture and related protocol overview based on routers that have asynchronous transfer mode (ATM) cell switching capability in addition to conventional Internet protocol (IP) packet forwarding. The proposed architecture can provide high-throughput and low-latency switched paths for individual application flows or a group of application flows while retaining current router-based internetworking architecture. The proposed router is able to establish the switched path based on the characteristics of flows, e.g., arrival of a data packet with specific upper layer protocols or arrival of more than a certain amount of data packets in a predetermined period, as well as by the reception of an IP-layer resource reservation request, such as resource reservation protocol (RSVP). One important feature that is provided by the proposed router is interoperability with the emerging ATM network platform specified by the ATM Forum and the telecommunications sector of the International Telecommunications Union (ITU-T). The proposed routers can be interconnected with each other over the point-to-point synchronous optical network link as well as over the ATM network platform, which provides permanent virtual channel, virtual path, or switched virtual channel (SVC) services. That enables network carriers to provide Internet/intranet services as well as others, such as telephony, ATM/time division multiplexing leased line, or native ATM SVC services     

基于ATM虚拟局域网的网络拓扑搜索

动态显示网络系统的拓扑图是网络管理系统的基本功能,目前常见的拓扑搜索算法大部分都是基于网络层的,不能对链路层的动态网络拓扑进行搜索且不能发现和管理虚拟网。提出一种利用SNMP协议、ICMP 协议和ARP协议三种协议相结合的网络拓扑搜索算法,发现ATM网络的链路层网络拓扑和提取ATM虚拟网的配置信息。最后,以哈工大通信所的某一子网（ATM虚拟局域网）为例,对此算法进行了验证。     

The infrastructure for gigabit computer networks

The key features of the synchronous optical network (SONET) and asynchronous transfer mode (ATM) standards for the broadband integrated services digital network (B-ISDN) public network, which is expected to provide a powerful and ubiquitous infrastructure to support the emerging gigabit-per-second data and multimedia applications, are reviewed. The advantages of ATM, the ATM cell format, the B-ISDN protocol reference model and the ATM layer, the ATM adaptation layer, and ATM traffic management and signaling are discussed. An experimental high-performance parallel interface (HIPPI)-ATM-SONET interface is presented as an example to illustrate how the SONET and ATM techniques can be used to provide end-to-end transport for applications requiring a bandwidth of 800 Mb/s and possibly 1600 Mb/s     

Access network architectural issues for future telecommunicationnetworks

This article discusses the evolution of access networks to support future multimedia services, with emphasis on the role of Working Party 3 of ITU-T Study Group 13. An overview of the access network is given, and the interfaces between the access network and other portions of the telecommunications network such as the user-network interface (UNI), service node interface (SNI), and telecommunication management (Q3) interface are described. The major functions of the access network are summarized, and various examples of multimedia access architectures are discussed. Fundamental principles for the broadband service node interface (VB5) standard are reviewed     

Technology interoperation in ATM networks: the REFORM system

This article addresses the applicability and interoperation of standards and emerging technologies for the operation and management of ATM networks. The issue is tackled from a practical perspective based on experiences gained through the design, realization, and experimentation of a system developed by the ACTS AC208 REFORM project. Assuming an ATM-based network infrastructure offering a range of services with distinct QoS guarantees, the REFORM system encompasses the required functions for ensuring cost-effective network survivability and availability; fast-responding reliable fault detection and self-healing mechanisms, distributed dynamic routing functions with inherent load balancing capabilities, efficient VP layer design, and dynamic network reconfiguration functions. A number of standards and emerging technologies were used for designing and realizing the wide spectrum of functionality incorporated within the REFORM system, including ITU-T OAM 1.610 and Q.2931, ATM Forum UNI 3.0 and PNNI v. 1, OMG CORBA and Component Model, TINA NRA and ISO/OSI, and ITU-T TMN. Based on the experience gained, the article discusses and draws conclusions on the applicability, coexistence, and interoperation of the adopted technologies. It is shown that these technologies can coexist, through careful design, to the benefit of network design and operation     

B-ISDN architecture and protocol

The authors discuss the architecture and protocol for broadband ISDN (B-ISDN) based on the CCITT standards. The discussion attempts to address the general concept of B-ISDN architecture and protocol and, whenever possible, present alternatives and the rationale for decisions in the selection of the protocol. B-ISDN is presented as a network evolution, and the impact of the asynchronous transfer mode (ATM) on the network is described. The role of virtual channel and virtual path in B-ISDN is discussed. The B-ISDN protocol structure and lower layer functions comprising the physical, ATM, and adaptation layers are presented, and the tentative trends of signaling and traffic control for the B-ISDN are delineated     

Native Mode ATM的参考模型和协议状态分析

基于ＮａｔｉｖｅＭｏｄｅ的ＡＴＭ应用是体现ＡＴＭ技术优势和推动ＡＴＭ技术发展的关键因素之一，这一类型的应用需要建立在一个方便、灵活和高效的应用程序接口（ＡＰＩ）之上。本文从ＮａｔｉｖｅＭｏｄｅＡＴＭ的参考模型入手，通过分析ＡＴＭＵＮＩ协议，结合自己的工作ａｔｉｖｅＭｏｄｅＡＴＭ的协议状态进行了分析，这些工作为今后进行ＡＰＩ的开发奠定了基础。     

Technology interworking for SMDS: from the DXI/SNI to the ATM UNI

As service providers introduce asynchronous transfer mode (ATM) into their networks, they are faced with the issue of technology interworking: for a given service, can a customer who has an ATM user-network interface (UNI) communicate with a customer who does not have an ATM UNI? For switched multimegabit data service (SMDS), technology interworking is well defined. In fact, SMDS is supported by several technology platforms that can interwork with each other. The three major platforms which support SMDS are: a frame-based platform based on the SMDS data exchange interface (DXI), a cell-based platform based on the IEEE 802.6-1990 standard, and a cell-based platform based on ATM. This article examines how SMDS is supported by each of these platforms and how these platforms interwork. Furthermore, this article presents how the major interworking functions required for these platforms appear to be straightforward for suppliers to implement,     

ATM接入信令技术

简要介绍了用于ＡＴＭ网的用户－网络接口令令结构、消息类别和组成以及用户间连接配置和呼叫处理规程。     

International standards for the broadband ISDN user-network interface

Recently, a series of international standards on broadband ISDN were approved in CCITT Study Group XVIII. These standards establish fundamental details on transmission, multiplexing and switching for broadband aspects of ISDN. This article reports on the current definition of the BISDN user-network interface. The UNI reference configuration, physical medium, rates, structure, ATM functions, and operations and maintenance functions are addressed with consideration given to open issues and the direction of future standards activities. Objectives for the UNI capabilities have generally been met with the current CCITT specifications. Some of the UNI physical layer ‘options’, however, potentially impose networking cost penalties.     

Design alternatives for wireless local area networks

In this paper an overview of the wireless local area network (LAN) area is provided. The two types of wireless LAN topologies used today, infrastructure and ad hoc, are presented. The requirements that a wireless LAN is expected to meet are discussed. These requirements impact on the implementation of both the Physical and MAC layer of a wireless LAN. The unique characteristics of wireless physical layers are discussed and the five technology alternatives used today are presented. MAC layer issues are discussed and the two existing standards, IEEE 802.11 and HIPERLAN 1, are examined. Polling‐based MAC protocols (RAP, GRAP) are also reviewed. Finally, an introduction is made to wireless technologies that interact with WLANs, such as personal area networking (PAN) and wireless ATM and an overview of HIPERLAN 2, a WLAN using ATM technology, is provided. Copyright © 2001 John Wiley & Sons, Ltd.     

ISDN user-network interface management protocol

The author discusses an ISDN user-network interface management protocol. The protocol enables users to manage network services, operation (such as network reconfiguration and routing change), and maintenance. That the user equipment should be looked at from both user-of-service and manager-of-service perspectives is emphasized in a discussion of the relation of the user equipment to the Telecommunication Management Network (TMN). The current status of the ISDN UNI management protocol architecture studies in CCITT is reviewed, and problems specific to the ISDN environment are identified. The need to strengthen the convergence function to solve ISDN-specific problems is stressed. Examples of ISDN UNI management protocol applications are given     

Overview of implementing ATM based enterprise local area networkfor desktop multimedia computing

The authors discuss important implementation issues in an ATM-based enterprise network, and propose possible migration strategies for the smooth introduction of ATM into the desktop computing environment. They present the ATM traffic service classes and the associated traffic management functions. The authors cover the latest ATM forum standardization efforts on traffic management functions and LAN emulation. Finally, they discuss how to seamlessly support the existing transport control protocol (TCP)/Internet protocol (IP) in an ATM environment     

A signaling and control architecture for mobility support in wireless ATM networks

This paper presents a signaling and control architecture for mobility support in a wireless ATM network that provides integrated broadband services to mobile terminals. A system level protocol architecture for a wireless ATM network is outlined. The proposed protocol stack incorporates new wireless link MAC, DLC and wireless control sublayers, together with appropriate mobility extensions to the existing ATM network control layer. Wireless control and ATM signaling capabilities required for mobility support are discussed, and preliminary solutions are given for selected major functions. Potential extensions to standard Q.2931 ATM signaling are proposed to support handoff and service parameter/QoS renegotiation required for mobility. An associated wireless control protocol for supporting terminal migration, resource allocation, and handoff is discussed. Preliminary experimental results are given which validate the proposed handoff control protocol on an ATM network testbed.