Sonochemical synthesis and stabilization of concentrated antimicrobial silver‐chitosan nanoparticle dispersions

This work reports on a green synthetic route to produce concentrated aqueous dispersions of silver nanoparticles (AgNP) employing high‐intensity ultrasound (US) and chitosan (CS) as a nontoxic reducing agent for Ag⁺ salts and AgNP stabilizer. The sonication simultaneously boosted the synthesis and improved the stability of the AgNP, capping them with CS. Hybrid AgNP‐CS antimicrobial dispersions, stable for at least 6 months, were synthesized in a simple single step process. The use of US allowed for applying relatively mild processing temperatures (60 °C) and reaction time between 30 min and 3 h to obtain concentrated dispersions of AgNP that otherwise could not be obtained even after 72 h under mechanical stirring at the same reaction conditions. Upon sonication spherical AgNP‐CS with a size between 60 and 100 nm were generated, in contrast to the average diameter of ～200 nm of the particles obtained by stirring. The antibacterial efficiency of the AgNP‐CS hybrids was evaluated against the medically relevant pathogens Staphylococcus aureus and Escherichia coli. The US‐synthesized AgNP‐CS showed more than three fold higher antibacterial activity compared to the particles obtained under stirring, due to their higher concentration and smaller size. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45136.     

Small AgNP in the Biopolymer Nanocomposite System

In this work, ultra-small and stable silver nanoparticles (AgNP) on chitosan biopolymer (BP/AgP) were prepared by in situ reduction of the diamminesilver(I) complex ([Ag(NH₃)₂]⁺) to create a biostatic membrane system. The small AgNP (3 nm) as a stable source of silver ions, their crystal form, and homogeneous distribution in the whole solid membrane were confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The X-ray photoelectron spectroscopy (XPS) and Auger analysis were applied to investigate the elemental composition, concentration, and chemical state of surface atoms. It was found that ultra-small metallic nanoparticles might form a steady source of silver ions and enhance the biostatic properties of solid membranes. Ultra-small AgNP with disturbed electronic structure and plasmonic properties may generate interaction between amine groups of the biopolymer for improving the homogeneity of the nanometallic layer. In this work, the significant differences between the typical way (deposition of ex-situ-prepared AgNP) and the proposed in-situ synthesis approach were determined. The improved thermal stability (by thermogravimetry and differential scanning calorimetry (TG/DSC) analysis) for BP/AgP was observed and explained by the presence of the protective layer of a low-molecular silver phase. Finally, the antibacterial activity of the BP/AgP nanocomposite was tested using selected bacteria biofilms. The grafted membrane showed clear inhibition properties by destruction and multiple damages of bacteria cells. The possible mechanisms of biocidal activity were discussed, and the investigation of the AgNP influence on the bacteria body was illustrated by AFM measurements. The results obtained concluded that the biopolymer membrane properties were significantly improved by the integration with ultra-small Ag nanoparticles, which added value to its applications as a biostatic membrane system for filtration and separation issues.     

无患子提取液制备纳米银及其协同抗菌性研究

以无患子提取液为还原剂,制备了含有纳米银的无患子复合抗菌液,考察了无患子提取液用量、温度、硝酸银摩尔浓度等因素对纳米银形貌和粒径的影响,并借助UV-Vis可见分光光谱、X射线衍射(XRD)以及透射电子显微镜(TEM)对产物进行表征;通过抑菌环法探讨了复合抗菌液对大肠杆菌的抗菌活性。由UV-Vis图谱可知,复合抗菌液等离子体共振吸收峰(SPR)在418 nm左右,说明该复合抗菌液中有纳米银的存在;XRD图表明合成的纳米银为面心立方结构;TEM图表明合成纳米银粒径为10~40 nm。由此获得的含有纳米银的无患子复合抗菌液对大肠杆菌表现出显著协同抗菌活性,抑菌圈直径变大。     

Spectroscopic analysis and catalytic application of biopolymer capped silver nanoparticle,an effective antimicrobial agent

Microbial reduction of silver ion (conc. 1 mM AgNO₃) was performed by Alkaliphilus oremlandii strain ohILAs in an alkaline pH 10. The synthesized silver nanoparticle was stabilized by poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) biopolymer which was also synthesized by the microbial culture of Alkaliphilus oremlandii strain ohILAs at pH8. The particle size and shape of the silver nanoparticles was studied by dynamic light scattering and under a transmission electron microscope and it was found that the particle size of polymer stabilized colloidal silver was comparatively lower (22–43nm) than that for the unstabilized one (63–93 nm). The stabilization of nanoparticles in polymer dispersed medium after around 60 days was confirmed from analysis of UV‐visible spectroscopy and scanning electron microscopy. The crystalline peaks as recorded with X‐ray's diffraction were observed at 2θ values of 38° and 43°, indicating the fcc crystalline structure of the silver nanoparticle. The antimicrobial activity of silver nanoparticles on gram‐negative bacteria strain (Escherichia coli XL1B) and gram‐positive strain (Lysinibacillus fusiformis) showed better performance by the solution of polymer stabilized nanoparticle than that for the non polymer stabilized one. The reduction of nitro group in p‐nitrophenol to p‐aminophenol was observed from the analysis of UV‐Visible spectroscopy in which, the shifting of absorption peak at 400 to 295 nm and the simultaneous regeneration of light brown color (λ_max 410 nm) of silver nanoparticles confirmed the catalytic activity of silver nanomaterials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41495.     

Plasma treated activated carbon impregnated with silver nanoparticles for improved antibacterial effect in water disinfection

A strategy to selectively attach more Ag nanoparticles on the external surface of activated carbon (AC) is being proposed and used as an antibacterial medium for water disinfection. Ag nanoparticles were first synthesized under UV irradiation by reducing silver nitrate with sodium citrate; the latter serving the dual purpose of both a reducing and a capping agent. Transmission electron micrographs show that Ag particles have a mean diameter of 28 nm with a standard deviation of 5 nm. The AC was treated by an oxygen plasma to increase the number of polar functional groups on the surface. This carbon-surface modification treatment increased the number of Ag nanoparticles on the external surface of AC, compared to that inside pores. Fourier transform infra-red and X-ray photoelectron spectroscopy results show that the oxygen plasma treatment leads to an increase in oxygen-containing-functional groups, such as C–O and CO, from 21.9% to 30.8%. Microbiological investigations by plate assay and shake flask tests confirmed the antibacterial nature of the AC–Ag hybrid, showing an order of magnitude increase in death rate constant from 3.72 to 41.88 h⁻¹ on plasma treatment (rate constant means rate of loss of viable cell).     

Oxidative stress mediated cytotoxicity of biologically synthesized silver nanoparticles in human lung epithelial adenocarcinoma cell line

The goal of the present study was to investigate the toxicity of biologically prepared small size of silver nanoparticles in human lung epithelial adenocarcinoma cells A549. Herein, we describe a facile method for the synthesis of silver nanoparticles by treating the supernatant from a culture of Escherichia coli with silver nitrate. The formation of silver nanoparticles was characterized using various analytical techniques. The results from UV-visible (UV-vis) spectroscopy and X-ray diffraction analysis show a characteristic strong resonance centered at 420 nm and a single crystalline nature, respectively. Fourier transform infrared spectroscopy confirmed the possible bio-molecules responsible for the reduction of silver from silver nitrate into nanoparticles. The particle size analyzer and transmission electron microscopy results suggest that silver nanoparticles are spherical in shape with an average diameter of 15 nm. The results derived from in vitro studies showed a concentration-dependent decrease in cell viability when A549 cells were exposed to silver nanoparticles. This decrease in cell viability corresponded to increased leakage of lactate dehydrogenase (LDH), increased intracellular reactive oxygen species generation (ROS), and decreased mitochondrial transmembrane potential (MTP). Furthermore, uptake and intracellular localization of silver nanoparticles were observed and were accompanied by accumulation of autophagosomes and autolysosomes in A549 cells. The results indicate that silver nanoparticles play a significant role in apoptosis. Interestingly, biologically synthesized silver nanoparticles showed more potent cytotoxicity at the concentrations tested compared to that shown by chemically synthesized silver nanoparticles. Therefore, our results demonstrated that human lung epithelial A549 cells could provide a valuable model to assess the cytotoxicity of silver nanoparticles.     

Size controlled synthesis of well-distributed nano-silver on hydroxyapatite using alkanolamine compounds

A well-distributed nano-silver hydroxyapatite composite has been successfully prepared by a one-pot synthesis method. Hydroxyapatite was separately synthesized by a sol-gel method, then impregnated with silver nanoparticles with the mediation of Uncaria gambir Roxb. leaf extract in the presence of three kinds of alkanolamine compound; monoethanolamine (MEA), diethanolamine (DEA), and triethanolamine (TEA) as capping agents. The effect of different capping agents on the properties of the silver nanoparticles and the nano-silver hydroxyapatite composite were studied. UV–visible spectrophotometer analysis exhibited absorbance peaks at 402–439 nm which specifically corresponds to spherical silver nanoparticles. Higher optical absorbance was observed in TEA-capped silver nanoparticles, than in DEA and MEA-capped ones. X-ray diffraction (XRD) analysis showed a highly crystalline hexagonal structure for hydroxyapatite and no detected metallic silver. However, the presence of 1.65% silver was confirmed by energy dispersive x-ray (EDX) spectroscopy analysis. Transmission electron microscopy (TEM) analysis revealed spherical silver nanoparticles with a size range of 2–62 nm (smallest mean diameter of 2 nm) adhered to the hydroxyapatite surface. The TEA capped impregnated silver nanoparticles were the smallest, corresponding to the best capping performance, followed by those capped by DEA and MEA. Small-sized nanoparticles on hydroxyapatite are beneficial for highly antibacterial bone implants.     

Synthesis of new functionalized polymers and their use as stabilizers of Pd,Pt, and Rh nanoparticles. Preliminary catalytic studies

Polymers I ‐ X with functionalized main chain were synthesized from commercial polymers containing reactive groups, anhydride (for Gantrez), or carboxylate (for polyacrylates) moieties, to be used as stabilizers of metallic nanoparticles. ¹H HRMAS, ¹³C MAS NMR, IR, and GPC techniques were applied to characterize the new polymers. Metal transition nanoparticles stabilized with these polymers were prepared in organic solvents (Pd and Pt) and also in water/ethanol medium (Rh), under hydrogen atmosphere. TEM analysis revealed the formation of small nanoparticles, in the range ～ 3–20 nm, depending on the solvent, metal precursor, metal concentration, and polymer nature. Preliminary catalytic applications, C? C couplings using palladium and hydrogenations using platinum and rhodium systems in organic and also aqueous medium, were tested. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Production of surface-active sophorolipid biosurfactant and crude oil degradability by novel Rhodotorula mucilaginosa strain SKF2

Biosurfactants are produced by important types of microorganisms such as bacteria, yeast, and filamentous fungi and have been used in a variety of industries. Among the 15 crude oil-degrading fungi, the two molds and one yeast were identified by 18S rDNA sequences as Mucor circinelloides strain SKMC, Fusarium fujikuroi strain DB2, and Rhodotorula mucilaginosa strain SKF2. These strains were isolated from crude oil–contaminated soil, diesel oil–contaminated soil, and activated sludge in the Oil Refinery Plant in Isfahan, Iran, respectively. The yeast strain was identified as a novel crude oil–degrading and biosurfactant-producing fungi in the presence of (1% v/v) Iranian light crude oil in the minimal salt medium (MSM). The highest amount of the dry weight of produced biosurfactant was measured at 6.2 g L⁻¹. Chemical nature of produced biosurfactant was determined as a surface-active sophorolipid biosurfactant compound by thin-layer chromatography, Fourier transform infra-red spectroscopy, and gas chromatography–mass spectrometry (GC–MS) analysis. The residual hydrocarbons in the MSM were analyzed by GC–MS, and it was shown that octadecane and docosane were eliminated by this novel strain completely.     

Sunflower Acid Oil-Based Production of Rhamnolipid Using Pseudomonas aeruginosa and Its Application in Liquid Detergents

Utilization of industrial waste as substrates for the rhamnolipid synthesis by Pseudomonas aeruginosa is a worthy alternative for conventionally used vegetable oils and fatty acids to reduce the production cost of rhamnolipid. Sunflower acid oil (SAO), a by-product of the oil industry, contains 70% 18:0 fatty acid, with oleic acid as a major component. In this scope, production and analysis of rhamnolipid was successfully demonstrated using SAO as a new substrate. Pseudomonas aeruginosa produced rhamnolipid (a glycolipid biosurfactant) at a maximum concentration of 4.9 g L⁻¹ with 60 g L⁻¹ of SAO in the medium. Structural properties of rhamnolipid biosurfactant are confirmed using thin layer chromatography (TLC), high performance liquid chromatography (HPLC), and fourier transformed infrared spectroscopy (FTIR) analysis. Further surface-active properties of the crude rhamnolipid were evaluated by measuring surface tension and emulsification properties. The synthesized rhamnolipid reduced the surface tension of water to 30.12 mN m⁻¹ and interfacial tension (against heptane) to 0.52 mN m⁻¹. Moreover, rhamnolipid shows the highest emulsification index (above 80%) for vegetable oils. This study confirms the use of SAO as a potential substrate for rhamnolipid production. The synthesized rhamnolipid was incorporated in liquid detergent formulation along with alpha olefin sulfonate (AOS) and sodium lauryl ether sulfate (SLES). The performance properties including foaming and cleaning efficiency of liquid detergent were compared.     

Exploration of Staphylococcus nepalensis (KY024500) Biosurfactant towards Microbial Enhanced Oil Recovery

Oleochemicals have long been used as biolubricants, biopolymers, and biosurfactants; an effective alternative to petroleum-based products. The present study explores the biosurfactant potential of a novel strain, isolated from rocks of earthquake-prone area. On the basis of morphological, biochemical and 16S rRNA sequencing analysis, the isolate was identified as Staphylococcus nepalensis (KY024500). A biosurfactant yield 2.39, 1.39, and 0.9 g L⁻¹ was obtained using glycerol, waste orange peel, and diesel as a sole carbon source, respectively. Based on oil recovery experimental findings through sand pack column, the obtained biosurfactant from waste orange peels as a sole carbon source was carried forward for further analysis. Thus, obtained biosurfactant from waste orange peels were subjected to solvent extraction and purified by column chromatography. The purified biosurfactant thus obtained was characterized with the help of fourier transform infrared (FTIR), nuclear magnetic resonance (NMR), gas chromatography-mass spectroscopy (GC–MS), and MALDI TOF MS/mass spectroscopy (MS) analysis. FTIR spectroscopic analysis revealed the presence of a carbonyl, amine, hydroxyl, and methyl as functional groups. The GC–MS analysis showed the presence of benzene dicarboxylic acid diethyl ester and pthalic acid as fatty acids while MALDI TOF MS/MS analysis shows lysin-glycin as a hydrophilic dipeptide moiety. This study also demonstrates Microbial Enhanced Oil Recovery (MEOR) potential of the biosurfactant as more efficient than commercial ones. The biosurfactant obtained from waste orange peel as carbon source was able to facilitate a 20% higher recovery of diesel from sand pack recovery column.     

‘Green’ synthesis and optical properties of silver–chitosan complexes and nanocomposites

Silver nanoparticles were synthesized in a chitosan biopolymer by an in situ ‘green’ chemical procedure, using d-glucose as the reducing agent. The reaction intermediates (silver–chitosan complexes) as well as the obtained nanocomposites were investigated using transmission electron microscopy, UV–vis, FTIR and photoluminescence spectroscopy. The theoretical analysis of the UV–vis absorption of the Ag–chitosan complexes suggested that the significant contribution to the complex spectrum arises from clusters of silver containing 4–9 atoms. The absorption spectrum of the nanocomposite exhibited a strong surface plasmon resonance band at 406 nm. The photoluminescence behavior of the pure chitosan, the silver–chitosan complexes and the nanocomposites were discussed in terms of morphology and silver weight content.     

Synthesis and characterization of novel silver/L‐phenylalanine‐based optically active polyacrylate nanocomposite

Novel bioactive and optically active poly(N‐acryloyl‐L ‐phenylalanine) (PAPA) was synthesized by atom transfer radical polymerization. PAPA‐silver (Ag) nanocomposites have been successfully prepared via in situ reducing Ag⁺ ions anchored in the polymer chain using hydrazine hydrate as reducing agent in an aqueous medium. By controlling of the amount of Ag⁺ ions introduced, we have produced an organic/inorganic nanocomposite containing Ag nanoparticles with well controlled size. Nanocomposites were characterized by X‐ray diffraction (XRD), UV–Vis spectrophotometry, transmission electron microscopy, and Fourier transform infrared. XRD pattern showed presence of Ag nanoparticles. The PAPA/Ag nanocomposites with 1 : 10 silver nitrate (AgNO₃) : PAPA ratio revealed the presence of well‐dispersed Ag nanoparticles in the polymer matrix. All of these Ag nanoparticles formed are spherical and more than 80% of them are in the range of 15–25 nm. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,Characterisation and DFT Studies of Stigmasterol Mediated Silver Nanoparticles and Their Anticancer Activity

The present investigation reports the facile, reproducible and eco-friendly biological synthesis of nano silver using Ficus Hispida leaf extract (FHLE) as a reductant. The properties of the synthesized silver nanoparticles (Ag-NP’s) is characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy (TEM), UV–visible spectroscopy, Fourier transform infrared spectroscopy and X-ray diffraction studies. The synthesized Ag-NPs are found to have spherical shape with average particle size in the range of 50–100 nm. The XRD studies and selected area electron diffraction pattern of TEM images confirm the face cantered cubic structure of biosynthesised silver nanoparticles. The DFT studies reveal that the stigmasterol present in FHLE is responsible for leaf extract to behave as a reducing agent for reduction of Ag⁺ ions into Ag⁰. The antitumor studies against DLA cell lines of the biosynthesized Ag-NPs is found to have 100% inhibition with concentration of 200 µg/ml of Ag-NP’s.     

Studies on Biosurfactants Produced using Bacillus cereus Isolated from Seawater with Biotechnological Potential for Marine Oil-Spill Bioremediation

With the aim of producing a biotensioactive material for use in the remediation of marine environments, screening for biosurfactant-producing bacteria was conducted with strains isolated from seawater contaminated with petroleum derivatives. Gene sequencing revealed that all four promising biosurfactant-producing isolates belonged to the same genus and species, namely Bacillus cereus. The biosurfactant-producing bacteria were cultivated with different carbon (glucose, soybean oil, and waste frying soybean oil) and nitrogen (ammonium chloride, sodium nitrate, urea, and peptone) sources. B. cereus strain BCS0 was chosen as the best biosurfactant producer in a mineral medium with 2% frying oil and 0.12% peptone. Following the optimization of agitation and cultivation time, an agitation rate of 250 rpm and 48 h of cultivation were selected. Under these conditions, the surface tension was reduced to 27 mN m⁻¹ and the biosurfactant concentration was 3.5 g L⁻¹. The critical micelle concentration (CMC) of the biosurfactant was defined as 500 mg L⁻¹. The biosurfactant remained stable within large ranges of pH (2–10), salinity (2–10%), and temperature (5–120 °C). Under these conditions, motor oil emulsification rates were greater than 90%. Moreover, the biosurfactant properties remained unaltered after heating at 90 °C for 120 min. The biosurfactant enhanced the degradation of motor oil up to 96% in 27 days and exhibited considerable motor oil displacement capacity. Thus, the biosurfactant has potential in the application of remediation processes in marine environments.     

Gellan gum capped silver nanoparticle dispersions and hydrogels: cytotoxicity and in vitro diffusion studies

The preparation of highly stable water dispersions of silver nanoparticles using the naturally available gellan gum as a reducing and capping agent is reported. Further, exploiting the gel formation characteristic of gellan gum silver nanoparticle incorporated gels have also been prepared. The optical properties, morphology, zeta potential and long-term stability of the synthesized silver nanoparticles were investigated. The superior stability of the gellan gum-silver nanoparticle dispersions against pH variation and electrolyte addition is revealed. Finally, we studied the cytotoxicity of AgNP dispersions in mouse embryonic fibroblast cells (NIH3T3) and also evaluated the in vitro diffusion of AgNP dispersions/gels across rat skin.     

Recycling of Bakery Waste as an Alternative Carbon Source for Rhamnolipid Biosurfactant Production

Production of a rhamnolipid biosurfactant (RBS) using discarded mixed bakery waste (BW) employing bacterial strain Pseudomonas aeruginosa strain PG1 (identified by 16 s rDNA sequencing) was investigated for bioconversion of the food waste. Dry and powder form BW was supplemented with mineral salt media (MSM) as a sole carbon source for production of RBS. RBS production was measured based on the drop collapse assay and surface tension (ST) reduction of the culture media. Production of RBS in the culture media was enhanced by optimizing the carbon source (BW) concentration and the proper nitrogen source along with the pH of the MSM. Under optimized culture conditions, 11.56 g L⁻¹ day⁻¹ crude biosurfactant (BS) was achieved. The RBS had the ability to reduce the ST of the optimized MSM from 72.0 to 25.8 mN m⁻¹ during culture, where the critical micelle concentration (CMC) of the biosurfactant was found to be 100 mg L⁻¹. Liquid Chromatography Mass Spectroscopy (LC-MS), Fourier Transform Infrared spectroscopy (FTIR), and scanning electron microscopy (SEM)–energy dispersive X-ray spectroscopy (EDS) analyses of the purified BS confirmed that it is of rhamnolipid in nature and it is made up of both monorhamnolipid and dirhamnolipid congeners. Furthermore, the RBS did not express any cytotoxic effect on the cell line of mouse L292 fibroblastic cell indicating the biosafety nature of the high-value biomolecule.     

Immobilization of silver nanoparticles on polyethylene terephthalate

Two different procedures of grafting with silver nanoparticles (AgNP) of polyethylene terephthalate (PET), activated by plasma treatment, are studied. In the first procedure, the PET foil was grafted with biphenyl-4,4′-dithiol and subsequently with silver nanoparticles. In the second one, the PET foil was grafted with silver nanoparticles previously coated with the same dithiol. X-ray photoelectron spectroscopy and electrokinetic analysis were used for characterization of the polymer surface at different modification steps. Silver nanoparticles were characterized by ultraviolet-visible spectroscopy and by transmission electron microscopy (TEM). The first procedure was found to be more effective. It was proved that the dithiol was chemically bonded to the surface of the plasma-activated PET and that it mediates subsequent grafting of the silver nanoparticles. AgNP previously coated by dithiol bonded to the PET surface much less.     

In situ formation of silver nanoparticles in poly(methacrylic acid) hydrogel for antibacterial applications

In this study, silver nanoparticles‐loaded poly(methacrylic acid) (PMAAc) hydrogels (HGs) have been produced by using a novel approach that involves equilibration of PMAAc HGs in aqueous solution of Ag(I) ions, followed by their reduction with borohydride. The AgNP/PMAAc composite, so produced, was characterized by scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Fourier‐transform infrared, surface plasmon resonance, and differential scanning colorimetry analysis. The composite demonstrated pH‐dependent swelling behavior. The AgNP/PMAAc composites demonstrated fair antibacterial action against Escherichia coli. Their biocidal action was found to depend on the concentration of silver present within the HG and degree of crosslinking of HGs. POLYM. ENG. SCI., 2013. © 2013 Society of Plastics Engineers     

Synthesis and characterization of poly(2-aminothiophenol-co-2-methylaniline)/silver nanoparticles as antisulfate-reducing bacteria

Poly(2-aminothiophenol) (P2ATH), poly(2-methylaniline) (P2MeANI), and poly(2ATH-co-2MeANI) are synthesized using ammonium persulfate as an oxidant in aqueous hydrochloric acid (HCl) medium at room temperature. The obtained polymeric samples are assembling on silver nanoparticles. The structures of prepared polymeric samples are characterized by ultraviolet–visible, infrared, proton nucleus magnetic resonance (¹H NMR), X-ray diffraction, electron microscope, transmittance electron microscope, and thermogravimetric analysis. The antibacterial efficiency of the prepared polymeric and polymer/Ag nanoparticle samples is studied for the removal of sulfate-reducing bacteria. The results reveal that the assembling of both P2ATH and P2MeANI on Ag nanoparticles enhances the antisulfate-reducing bacteria’s efficiencies, but in a case of P2ATH-co-2MeANI the efficiency is more than its Ag nanoparticles.