DSC studies of poly(vinyl chloride)/poly(ε-caprolactone)/poly(ε-caprolactone)-b-poly(dimethylsiloxane) blends

Poly(vinyl chloride)/poly(ε-caprolactone)/poly(ε-caprolactone)-b-poly(dimethylsiloxane) [PVC/PCL/(PCL-b-PDMS)] blends were prepared by solvent casting from tetrahydrofuran. The content of PVC was kept constant (60 wt%); the PCL and PCL-b-PDMS contents were varied by replacing different amounts of PCL [0–20 wt% from the PVC/PCL (60/40) blend] with PCL-b-PDMS copolymer having different molecular weights of the PCL blocks. The thermal properties of prepared blends were investigated by differential scanning calorimetry in order to analyse miscibility (through glass transition temperature) and crystallinity. Differential scanning calorimetry analyses show that the PVC/PCL/PCL-b-PDMS blends are multi-phase materials which contain a PVC plasticized with PCL phase, a block copolymer PCL-b-PDMS phase (with crystalline and amorphous PCL and PDMS domains) and a PCL phase (preponderantly crystalline).     

Rheological properties of poly(ε-caprolactone) and poly(styrene-co-acrylonitrile) blends

Summary Rheological properties of poly(-caprolactone) (PCL) and Poly (styrene-co-acrylonitrile) (SAN) blends were examined as a function of the acrylonitrile (AN) content in SAN, to systematically understand the correlation between the interaction parameter and the theological properties of miscible polymer blends. When the plateau modulus (G _N ⁰) and zero shear viscosity ( ₀) of the PCL/SAN blends are plotted against the AN content in SAN, a minimum is observed. Qualitatively, the results obtained parallel the variation of the interchain interaction with the AN content. The negative deviation ofG _N ⁰ and ₀ from linearity seems to be attributed to the increase in the entanglement molecular weight between dissimilar chains which results from the chain extension caused by interchain interaction.     

Effect of poly(ε-caprolactone) and titanium (IV) dioxide content on the UV and hydrolytic degradation of poly(lactic acid)/poly(ε-caprolactone) blends

The effect of accelerated weathering degradation on the properties of poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blends and PLA/PCL/titanium (IV) dioxide (TiO₂) nanocomposites are presented in this paper. The results show that both polymers are susceptible to weathering degradation, but their degradation rates are different and are also influenced by the presence of TiO₂ in the samples. Visual, microscopic and atomic force microsocpy observations of the surface after accelerated weathering tests confirmed that degradation occurred faster in the PLA/PCL blends than in the PLA/PCL/TiO₂ nanocomposites. The X-ray diffraction results showed the degradation of PCL in the disappearance of its characteristic peaks over weathering time, and also confirmed that PLA lost its amorphous character and developed crystals from the shorter chains formed as a result of degradative chain scission. It was further observed that the presence of TiO₂ retarded the degradation of both PLA and PCL. These results were supported by the differential scanning calorimetry results. The thermogravimetric analysis results confirmed that that PLA and PCL respectively influenced each other's thermal degradation, and that TiO₂ played a role in the thermal degradation of both PLA and PCL. The tensile properties of both PLA/PCL and PLA/PCL/TiO₂ were significantly reduced through weathering exposure and the incorporation of TiO₂.     

Rheologically determined phase diagram of poly(ε-caprolactone)/poly(styrene-co-acrylonitrile) blends: Role of ramp rate in dynamic measurements

The phase behavior of poly(ε-caprolactone) (PCL)/poly(styrene-co-acrylonitrile) (SAN) blends, with a lower critical solution temperature (LCST)-type phase diagram over a virtual upper critical solution temperature (UCST) one, was investigated through thermal analysis and dynamic rheological measurements as a function of ramp rate. The LCST phase diagram was detected rheologically from the observed slope changes in the dynamic temperature ramps of storage modulus (G′). The determined phase transition points along with the spinodal temperatures, which are estimated based on the theoretical approach of Ajji and Choplin's mean field theory, shift to higher temperatures by reducing the ramp rate. The detected shifts show a composition dependency. Far away from the critical point, the phase transition temperatures of PCL/SAN blends change more noticeably, which originates from the smaller magnitude of concentration fluctuations in the metastable region and the stronger competition between the phase dissolution and cooling rate. The Flory–Huggins interaction parameter (χ) was appropriately adjusted into the LCST phase boundary as a function of temperature and composition. The results confirmed that the adjusted χ has higher temperature dependency at larger ramp rate of the dynamic measurements. The experimentally combined LCST and UCST phase behavior were also verified by the compressible regular solution model. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47750.     

Physical properties and biodegradation of acrylic acid grafted poly(ε-caprolactone)/chitosan blends

We blended films of acrylic acid grafted polycaprolactone (PCLgAA) and citosan (CS) with different compositions from aqueous acetic acid solution. DSC measurements showed that the melting temperatures and enthalpies of the blends decreased with increasing CS content. From FTIR results, we observe that the amino groups of CS form covalent bonds with the carboxylic groups of PCLgAA in addition to hydrogen bonds between the constituents in the blends. Though the crystal structure of the PCLgAA component was not changed, as proved by WAXD results, blending CS suppressed the crystallinity of the blends. Furthermore, the ductility of CS was increased during tensile testing in PCLgAA/CS blends due to enhanced affinity between the two components. However, PCLgAA/CS blends show greater resistance than PCL/CS blends to biodegradation in an enzymatic environment.     

Impact of organoclays on the phase morphology and the compatibilization efficiency of immiscible poly(ethylene terephthalate)/poly(ε-caprolactone) blends

Adding nanofillers Cloisite 30B (C30B) and Cloisite 15A (C15A) to poly(ethylene terephthalate) (PET)/poly(ε-caprolactone) (PCL) (70/30, wt/wt) blends via melt blending can improve their phase morphology and change their interface properties. The effects of the different selective localization of clay on the structure and the morphologies are studied and evaluated by theoretical and experimental methods. It is found that C30B is selectively localized in PET and at the PET-PCL interface, whereas C15A is mainly localized at the interface. Moreover, the changes in the rheological behavior of the blends are attributed to the formation of clay network-like structures. X-ray diffraction, scanning electron microscope, and transmission electron micrograph observations also evidenced an exfoliated and/or intercalated structure of C30B, and intercalated structure of C15A in the blend, together with significant morphology changes of the initially immiscible blend. The relative permeability to PET/PCL of the nanocomposites decreased with the increasing of nanoclays content. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48812.     

Compatibilizing capability of poly(β-hydroxybutyrate-,co-ε-caprolactone) in the blend of poly(β-hydroxybutyrate) and poly(ε-caprolactone)

In order to increase the miscibility in the blend of poly(β-hydroxybutyrate) [PHB] and poly(ε-caprolactone) [PCL], PHB/PCL copolyesters were used as compatibilizers. These PHB/PCL copolyesters were synthesized by transesterification in solution phase. The melting point [T_m] depression, which was not observed in PHB/PCL blend without compatibilizer, was observed when PHB/PCL copolyesters as compatibilizers were added to the PHB/PCL blend system. As the amount of compatibilizer added to the blend increased, the crystallization temperature [T_c] of PCL in the blend increased and T_c of PHB in the blend decreased. The difference in T_c between PHB and PCL was gradually reduced. When the sequence length of PHB block and PCL block in the PHB/PCL copolyester increased, the miscibility of the blend increased. This is evidenced by the depression in the T_m of PHB and PCL in the blend and by the decrease in the difference of T_c between PHB and PCL. From the polarizing optical micrographs, the phase separation in PHB/PCL blend was observed. However, in the presence of PHB/PCL copolyester, the spherulite of PHB grows in equilibrium with one phase melt. Received: 27 July 1998/Revised version: 12 October 1998/Accepted: 4 November 1998     

Tetracycline hydrochloride-containing poly (ε-caprolactone)/poly lactic acid scaffold for bone tissue engineering application: in vitro and in vivo study

In the current study, tetracycline hydrochloride (TCH), an antibiotic against most of the medically relevant bacteria, was incorporated into poly (ε-caprolactone)/poly lactic acid solution in order to develop a composite scaffold with both antibacterial and osteoinductive properties for the repair of infected bone defects. The composite scaffolds were produced from poly (ε-caprolactone) (PCL) and poly lactic acid (PLA) solution (1:1 (w/w)) incorporated with 3, 5, and 10% (w/w) of TCH by thermally induced phase separation technique. The scaffolds were evaluated regarding their morphology, wettability, porosity, degradation, mechanical properties, and cellular response. The scaffold containing 10% of TCH (PCL/PLA/TCH10%) was chosen as the optimum scaffold for further investigation in a rat femoral defect model. The study showed that after eight weeks, the bone formation was relatively higher in PCL/PLA/TCH10%-treated group with completely filled defect when compared with control (PCL/PLA scaffold without TCH). Histopathological evaluation showed that the defect in PCL/PLA/TCH10%-treated group was fully replaced by new bone and connective tissue. Our results provide evidence supporting the possible applicability of TCH-containing scaffolds for successful bone regeneration.     

In vitro degradation of poly(l-lactide)/poly(ε-caprolactone) blend reinforced with MWCNTs

The physical and mechanical properties of poly(l-lactide)/poly(??-caprolactone) (PLLA/PCL) blends reinforced with multiwalled carbon nanotubes (MWCNTs) before and after in vitro degradation were investigated. Because of brittleness, PLLA needs to be plasticized by PCL as a soft polymer. The MWCNTs are used to balance the stiffness and the flexibility of PLLA/PCL blends. The results showed that with incremental increase in concentration of MWCNTs in composites, the agglomerate points of MWCNTs were increased. The physical and mechanical properties of prepared PLLA/PCL blends and MWCNT/PLLA/PCL nanocomposites were characterized. The X-ray diffraction analysis of the prepared blends and composites showed that MWCNTs, as heterogeneous nucleation points, increased the lamella size and therefore the crystallinity of PLLA/PCL. The mechanical strength of blends was decreased with incremental increase in PCL weight ratio. The mechanical behavior of composites showed large strain after yielding and high elastic strain characteristics. The tensile tests results showed that the tensile modulus and tensile strength are significantly increased with increasing the concentration of MWCNTs in composites, while, the elongation-at-break was decreased. The in vitro degradation rate of polymer blends in phosphate buffer solution (PBS) increased with higher weight ratio of PCL in the blend. The in vitro degradation rate of nanocomposites in PBS increased about 65% when the concentration of MWCNTs increased up to 3% (by weight). The results showed that the degradation kinetics of nanocomposites for scaffolds can be engineered by varying the contents of MWCNTs.     

Reversibility of thermodynamic lower critical solution temperature phenomenon in miscible poly(ε-caprolactone)/poly(benzyl methacrylate)

Differential scanning calorimetry and optical microscopy were performed to examine the reversibility of phase separation at above the lower critical solution temperatures in a miscible poly(ε-caprolactone) (PCL)/poly(benzyl methacrylate) (PBzMA) blend system. Upon heating, phase separation occurred via a binodal nucleation and growth (NG) mechanism at above 240 °C, which is a lower critical solution temperature (LCST). The pattern of phase domains suggests that the phase separation was meta-stable. Interestingly, the LCST phase separation was found to be readily reversible to original homogeneity upon cooling at regularly accessible rates. A major factor may be that the temperature window between the LCST curve and blend T_g curve is wide, resulting in a convenient temperature range for the polymer chains to kinetically reorganize to a state favored by the thermodynamic conditions.     

Effects of processing conditions on hybrid filler selective localization,rheological, and thermal properties of poly(ε-caprolactone)/poly(lactic acid) blends

In this study, the effects of processing conditions through different mixing sequences were used to analyze the factors, which could influence the hybrid filler selective localization in an immiscible polymer blend and how localization can influence the rheological and thermal properties. Different selective localizations were observed depending on the mixing sequence used when the hybrid filler was added. Notably, nanoparticles can interact with each other, which favor a synergy between them and alters, besides the localization, the dispersion state, or can interact with one polymer phase, and also alter the nanoparticles' selective localization. An improvement in rheological properties was observed in the hybrid nanocomposite in which there was interaction between the nanoparticles, favoring the hexagonal boron nitride exfoliation. On the other hand, for the storage modulus and degree of crystallinity, the sharpest increase occurred in the hybrid nanocomposite in which the nanoparticles could interact preferably with one polymer phase. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48711.     

Poly(DL-lactide-co-ε-caprolactone) and poly(DL-lactide-co-glycolide) blends for biomedical application: Physical properties,cell compatibility,and in vitro degradation behavior

Poly(DL-lactide-co-ε-caprolactone) (PLCL) and poly(DL-lactide-co-glycolide) (PLGA) blends of various compositions were prepared. Fractured sections of PLCL/PLGA blends did not evidence phase separation and blend glass transition temperatures suggested some degree of blend compatibility. The elastic modulus showed a negative deviation from the additive law of mixture. Superior biocompatibility in terms of fibroblast NIH 3T3 cell adhesion and proliferation, better mechanical properties, and a more homogeneous phase were obtained with PLCL/PLGA 25/75 blend. Rapid degradation of PLCL phase (4–8 weeks) in PLCL/PLGA 25/75 blend led to a porous structure, which makes it a potential candidate for drug delivery systems.     

Fabrication and characterization of poly(ε-caprolactone)/gelatin nanofibrous scaffolds for retinal tissue engineering

Different ratios of poly(ε-caprolactone) (PCL) and gelatinwere used to fabricate scaffolds for regeneration of retinal pigment epithelium (RPE) layer. Physical and chemical characterizations were performed and the behavior of human RPE cells on the scaffolds was evaluated subsequently. An increase in gelatin content in the scaffold enhanced hydrophilicity, RPE cell attachment, proliferation, and spreading over PCL scaffolds. Granular and cytoplasmic expressions of RPE65 and Cytokeratin 8/18 markers confirmed the presence of RPE cells. It was believed that PCL/gelatin scaffolds could be used as substrates to replace RPE extracellular matrix to facilitate regeneration of RPE layer in retinal diseases.     

Poly(ε-caprolactone)/poly(m-anthranilic acid) and poly(ε-caprolactone)/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) electrospun nanofibers: Characterization,antioxidant, and electrochemical properties

Conducting polymers are widely used in many biomedical applications, but their non-degradability and non-biocompatibility limit their widespread use in applications. For this reason, many studies have been carried out on the developing degradable, biocompatible, and electrically conductive polymers. In this study, mixtures of conductive polymers (poly(m-antranilic acid) (P3ANA) and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS)) with biocompatible and biodegradable poly(ε-caprolactone) (PCL) were prepared. Their nanofibers were obtained by electrospinning and their antioxidant properties were investigated by 2,2′-azino-bis-3-ethylbenzthiazoline-6-sulfonic acid (ABTS) and copper ion reducing antioxidant capacity (CUPRAC) assays. Electrochemical properties were also investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The highest antioxidant activity was obtained from PCL/P3ANA3 electrospun nanofiber containing 10% (of PCL w/w) P3ANA with 93 and 614 μg TE/mg values for ABTS and CUPRAC assays, respectively. This nanofiber was found to be non-toxic according to 2,5-diphenyl-2H-tetrazolium bromide (MTT) analysis. PCL/PEDOT:PSS electrospun nanofiber has the highest maximum anodic current value of 0.08 mA. The maximum anodic current value of PCL/P3ANA3 nanofiber with the highest amount of P3ANA is also higher than other PCL/P3ANA nanofibers. These nanofibers were characterized by FT-IR, UV–vis., XRD and TGA and their surface morphologies were examined by scanning electron microscopy (SEM).     

Synthesis and self-assembly of a new amphiphilic thermosensitive poly(N-vinylcaprolactam)/poly(ε-caprolactone) block copolymer

New amphiphilic thermosensitive poly(N-vinylcaprolactam)/poly(ε-caprolactone) (PNVCL-b-PCL) block copolymers were synthesized by ring-opening polymerization of ε-caprolactone with hydroxy-terminated poly(N-vinylcaprolactam) (PNVCL-OH) as a macroinitiator. The structures of the polymers were confirmed by IR, ¹H NMR and GPC. The critical micelle concentrations of copolymer in aqueous solution measured by the fluorescence probe technique reduced with the increasing of the proportion of hydrophobic parts, so did the diameter and distribution of the micelles determined by dynamic light scattering. The shape observed by transmission electron microscopy (TEM) demonstrated that the micelles are spherical. On the other hand, the UV–vis measurement showed that polymers exhibit a reproducible temperature-responsive behavior with a lower critical solution temperature (LCST). The LCST of PNVCL-OH can be adjusted by controlling the molecular weights, and that of copolymers can be adjusted by controlling the compositions and the concentration. Variable temperature TEM measurements demonstrated that LCST transition was the result of transition of individual micelles to larger aggregates.     

Preparation,properties, and laser processing of poly(ɛ-caprolactone)/poly(lactic acid) blends with addition of natural fibers as a potential for printing plates application

In this research, biodegradable blend of poly(ɛ-caprolactone) (PCL) and poly(lactic acid) (PLA) is proposed as a new material for the production of a printing plate for embossing process. Printing plates for embossing consist of raised printing elements and recessed nonimage elements. In production of printing plates, laser technology was used in order to form a relief printing plate. The embossing process is based on the principle of the pressure of the relief printing plate into the printing substrate, which causes the controlled deformation of the substrate and three-dimensional (3D) effect. Coir fibers (CFs) were added as a natural filler to PCL/PLA blends to improve and adjust the properties of produced blends. Scanning electron microscopy micrographs, dynamic mechanical analysis analysis, roughness, and hardness were measured on prepared materials, and 2D and 3D microscopy was conducted on laser engraved printing plates. Results have shown that the addition of CFs improved the mechanical properties of produced materials. DMA results indicate the semicrystalline structure of all prepared blends, and that the addition of CFs raises the elasticity of the composites. Laser engraving showed that it is possible to engrave the produced biodegradable materials and to use it as a material for production of printing plates.     

Spherical nanoparticle effects on the lower critical solution temperature phase behavior of poly(ε-caprolactone)/poly(styrene-co-acrylonitrile) blends: Separation of thermodynamic aspects from kinetics

The effects of spherical nanosilica particles on the lower critical solution temperature (LCST) phase diagram of poly(ε-caprolactone) (PCL)/poly(styrene-co-acrylonitrile) (SAN) blends are investigated by using isochronal dynamic temperature sweep tests at different cooling rates. A stronger dependency of the rheologically determined phase-transition points on the cooling rate is observed in the presence of nanoparticles, which results from the large contribution of entropic surface tension of chains in the Gibbs free energy of mixing and much slower rate of PCL/SAN phase dissolution. By alleviating the effects of kinetic factors, it is found that the drop in the LCST-type phase boundary of PCL/SAN blends by adding nanofiller is more apparent than real. However, the closest LCST phase diagram to the real steady-state thermodynamic diagram shows an unexpected shift to lower temperatures by adding nanosilica. The migration of nanosilica particles to the SAN domains especially at lower cooling rates in the dynamic measurements is the most likely explanation of these observations. The findings that prove the profound impact of kinetic factors in dynamic temperature measurements are reached in a hybrid system, wherein the SAN chains are preferentially absorbed on the surface of a nanofiller having very small primary particle size. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48679.     

Different real-time degradation scenarios of functionalized poly(ε-caprolactone) for biomedical applications

Anterior cruciate ligament (ACL) ruptures are a much-commented injury as it can end the season or even career of professional athletes. However, the recovery of a patient from the general population is no less painful during the long period required by current treatments. Artificial ligaments could improve this healing, yet, orthopedic surgeons are still cautious about permanent ACL implants. Therefore, combining biodegradation and bioactivity could be a key feature for the popularization of these devices. This study aim at evaluating the real-time degradation of poly(ε-caprolactone) (PCL) grafted with the bioactive polymer sodium polystyrene sulfonate in different scenarios. PCL physical–chemical properties were evaluated before and after degradation. In addition, in vitro experiments were realized to confirm the long term influence of the grafting on cell response. Altogether, we were able to show different degradations scenarios, enabling to study the impact of degradation environment on degradation mode and rate of functionalized PCL.     

Stability of nanocomposites of poly(ε-caprolactone) with tungsten trioxide

Nanocomposites of poly(ε-caprolactone) (PCL) and tungsten trioxide (WO₃) were prepared by solvent casting using 5 and 10% of WO₃ nanoparticles. The nanocomposites were characterized using several analytical techniques such as XRD, SEM, thermal analysis (TGA and DSC), spectroscopic methods (FTIR and UV/Vis) to gather information on the modifications introduced by WO₃. Photodegradation of PCL/WO₃ nanocomposites was studied exposing the samples to a Xenon lamp, which simulates the UV spectrum of the sun. The results obtained showed that due to the incorporation of WO₃ nanoparticles, the nanocomposites exhibit higher thermal stability together with higher photodegradation efficiency.     

Interfacial characteristics of poly(ε-caprolactone)-grafted-halloysites nanotubes bionanocomposites

Dielectric and thermal characterization of nanohybrid films based on poly(ε-caprolactone) biopolymer were investigated. Nano-composites samples with distinct loadings of halloysite nanotubes (HNT) were prepared by in situ Ring Opening Polymerisation of ε-caprolactone. The effect of the incorporated HNT on the molecular relaxation process and interfacial polarization of PCL was studied via broadband dielectric spectroscopy (BDS) on a frequency domain starting from 1E-1 to 1E6 Hz and at temperatures ranging from −70°C to 50°C. The BDS measurements revealed four significant dielectric processes α-primary relaxation attributed to glass transition, β-secondary relaxation and two interfacial polarizations due to the semi-crystalline character of PCL and the added HNT fillers. According to our results, the weight ratio of HNT ranging between 3% and 5% is recommended for achieving the highest performing nanocomposite that can be used in several applications.