Synthesis of star polymer by means of the living polymerization of [(o-trifluoromethyl)phenyl]acetylene using a MoOCl4-based catalyst and the linking method

A star polymer was synthesized by addition of 1,4-diethynyl-2,5-dimethylbenzene as linking agent (30 °C, 24 h) after living polymerization of [(o-trifluoromethyl)phenyl]acetylene (o-CF₃PA) with MoOCl₄-n-Bu₄Sn-EtOH catalyst (in anisole, 30 °C, 20 min; [Mo]=10 mM, [P^∗]/[Mo]=40%, [o-CF₃PA]₀=200 mM). The M_n values of the living and star polymers were 8.1×10³ and 5.3×10⁴, respectively, according to gel permeation chromatography, while these values determined by multi-angle laser light scattering (MALLS) were 7.8×10³ and 2.5×10⁵. The M_w/M_n and arm number of the star polymer were 1.04 and 29, respectively, according to MALLS. The molecular weight and arm number of star polymer increased with increasing linking agent concentration and polymerization temperature.     

Synthesis and Characterization of a novel star shaped Rod-Coil Block Copolymer

Summary A novel star shaped rod-coil block copolymer, tri-armed star poly (-caprolactone)-b-poly {2,5-bis[(4-methoxyphenyl) oxycabony] styrene} [S-(PCL-b-PMPCS)₃], was successfully synthesized via atom transfer radical polymerization in chlorobenzene solution using macro-initiator and CuBr/Sparteine complex as catalyst. The results showed that the number average molecular weigh M_n was increased versus monomer conversion, and that the polydispersities M_w/M_n was quite narrow (<1.35), which were the character of controlled polymerization. The structure of the star shaped blcok copolymers was experimentally confirmed by ¹H NMR. The liquid crystalline behavior of them was studied using DSC and POM. The star shaped block copolymer with low molar percentage of PMPCS block could show T_m of PCL. And only those copolymers with long rigid segment PMPCS could form liquid crystalline phase which was quite stable with a high clearing point.     

Effects of molecular weight on liquid-crystalline behavior of a mesogen-jacketed liquid crystal polymer synthesized by atom transfer radical polymerization

The synthesis of poly{2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene} (PMPCS) with different molecular weight and low polydispersity was achieved by atom transfer radical polymerization in methoxybenzene solution using 1-bromoethylbenzene as an initiator and CuBr/sparteine complex as a catalyst. The concentration of the living centers throughout the polymerization was found to be constant. The liquid-crystalline behavior of the polymers with M_n ranging from 3800 to 17,400 g/mol was studied using DSC and POM. Only the polymers with M_n beyond 10,200 g/mol formed a liquid-crystalline phase, which was quite stable with a high clearing point (higher than the decomposition temperature of the polymer).     

Effect of nitrobenzene on initiator-fragment incorporation radical polymerization of divinylbenzene with dimethyl 2,2′-azobisisobutyrate

The polymerization of divinylbenzene (DVB) with dimethyl 2,2′-azobisisobutyrate (MAIB) was conducted at 70 and 80 °C in benzene in the presence of nitrobenzene (NB) as a retarder. When the concentrations of DVB, MAIB, and NB were 0.45, 0.50, and 0.50 mol/l, respectively, the polymerization proceeded without any gelation to yield soluble polymers. The polymer yield (up to 65%) and the molecular weight (M_n=1.5-4.2×l0⁴ at 70 °C and 1.3-3.9×l0⁴ at 80 °C) increased with time. The polymer formed in the polymerization at 80 °C for 4 h consisted of the DVB units with (4 mol%) and without double bond (41 mol%), methoxycarbonylpropyl group as MAIB-fragment (48 mol%), and NB unit (7 mol%). Incorporation of such a large number of the initiator-fragments as terminal groups in a polymer molecule indicates that the polymer is of a hyperbranched structure. The polymer showed an upper critical solution temperature (40 °C on cooling) in an acetone-water [14:1 (v/v)] mixture. The results of MALLS and viscometric measurements and TEM observation supported that the polymers formed in the present polymerization have a hyperbranched structure. The polymerization system at 70 °C involved an ESR-observable nitroxide radical formed by the addition of polymer radical to the nitro group of NB. The polymerization was kinetically investigated in dioxane. The initial polymerization rate (R_p) at 70 °C was expressed by R_p=k[MAIB]^0.5[DVB]^0.9[NB]^−0.4. The kinetic results were explained on the basis of the reversible addition of polymer radical to NB and the termination between the polymer radical and the nitroxide radical. The overall activation energy of the polymerization was 27.8 kcal/mol.     

Preparation and properties of azobenzene-containing amphiphilic miktoarm star polymers

Summary A series of novel miktoarm star polymers composed of a poly(ethylene oxide) (PEO) and two side-chain liquid crystalline azobenzene-containing polymethacrylate (PEO-(PMMAZO)₂) were prepared using atom transfer radical polymerization (ATRP). Bifunctional macroinitiator PEO-Br₂ was synthesized by condensation reaction in two steps and characterized by ¹H NMR, ¹³C NMR and IR. Kinetic study showed that it was a first order reaction referred to the monomer MMAZO, namely, 6-(4-methoxy-4’-oxy-azobenzene)hexyl methacrylate. The liquid crystalline behaviors of the miktoarm star polymers were studied by differential scanning calorimetry (DSC) and polarized optical microscope (POM). They exhibited smectic and nematic mesophases when Mn was beyond 9.4×10³ g/mol. The phase transition temperatures of the smectic and nematic phases increased while the melting temperature of PEO decreased with increasing molecular weight of the LC block. Compared with diblock polymer PEO-PMMAZO, the melting temperature of PEO in miktoarm star polymer decreased more rapidly.     

Synthesis and characterization of a novel liquid crystalline star‐shaped polymer based on α‐CD core via ATRP

Well‐defined side‐chain liquid crystalline star‐shaped polymers were synthesized with a combination of the “core‐first” method and atom transfer radical polymerization (ATRP). Firstly, the functionalized macroinitiator based on the α‐Cyclodextrins (α‐CD) bearing functional bromide groups was synthesized, confirmed by ¹H‐NMR, MALDI‐TOF, and FTIR analysis. Secondly, the side‐chain liquid crystalline arms poly[6‐(4‐methoxy‐4‐oxy‐azobenzene) hexyl methacrylate] (PMMAzo) were prepared by ATRP. The characterization of the star polymers were performed with ¹H‐NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). It was found that the liquid crystalline behavior of the star polymer α‐CD‐PMMAzo_n was similar to that of the linear homopolymer. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased as the molecular weight increased for most of these samples. All star‐shaped polymers show photoresponsive isomerization under the irradiation with Ultraviolet light. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and electrochemical performance of gel polymer electrolytes with a novel star network

Well-defined star shaped polymers with α-Cyclodextrin (α-CD) core linking PMMA-block arms were synthesized by atom transfer radical polymerization (ATRP). Gel polymer electrolytes (GPEs) were prepared by encapsulating electrolyte solution of 1 mol L⁻¹ of LiClO₄/EC-PC (volume 1:1) into the obtained star shaped polymer host. The ionic conductivity of the GPEs and the cycling characteristics of LiCoO₂/GPEs/Graphite cell were studied by electrochemical impedance spectroscopy and charge-discharge testing, respectively. The results indicate that the GPEs have a high ionic conductivity up to 1.63 × 10⁻³ S cm⁻¹ at room temperature and exhibit a high electrochemical stability potential of 4.5 V (vs. Li/Li⁺). The discharge capacity of LiCoO₂/GPEs/Graphite cell is about 98% of its initial discharge capacity after 20 cycles at 0.1 C rate. Discharge capacity of the model cell with GPEs is stable with charge-discharge cycling.     

Synthesis and properties of star-like wholly aromatic polyester fibers

Novel star-like wholly aromatic copolyesters having four arms based on a tetraamine star core, p- and m- hydroxybenzoic acids and 6-hydroxy-2-naphthoic acid have been successfully synthesized and spun into fibers for the investigation of the effect of the star-like structure on improving compressive properties of the fiber. The reactivity of the star core was demonstrated using a model compound with FTIR, ¹H and ¹³C NMR spectroscopy. The ¹³C NMR spectrum of the star-like terpolymer having a molar ratio of 10:1 of the monomers to star core showed a characteristic peak at around δ62 ppm which corresponds to a tetra-substituted carbon and thereby demonstrates that the star core was really incorporated into the polymer. The star-like copolyester exhibited a clear stir opalescence and liquid crystalline morphology in the temperature range of 150-280 °C. However, no transition was observed in the DSC thermogram except a clear T_g at 110 °C. The star-like terpolymer fiber, prepared from a polymer with a molar ratio of 500:1 for the monomers to imide core, was spun in the liquid crystalline state at 180 °C. Fiber structure and properties have been studied.     

Synthesis and rheological properties of an associative star polymer in aqueous solutions

Rheological properties of aqueous solutions and hydrogels formed by an amphiphilic star block copolymer, poly(acrylic acid)-block-polystyrene (PAA₅₄-b-PS₆)₄, were investigated as a function of the polymer concentration (C_p), temperature, and added salt concentration. The water-soluble polymer synthesised by atom transfer radical polymerization (ATRP) was found to form hydrogels at room temperature at polymer concentrations, C_p, over 22 g/L due to the interpolymer hydrophobic association of the PS blocks. Increasing C_p leads to stronger elastic networks at room temperature that show a gel-to-solution transition with increasing temperature. Increase of ionic strength decreases the moduli compared with the pure hydrogel but did not affect the gel-sol transition temperature significantly. Small-angle X-ray experiments showed two distinct scattering correlation peaks for samples above the gelling C_p, which indicates the aggregates formed due to hydrophobic association. Upon heating the intensity of the scattering correlation peaks was found to decrease indicating the loss of the network structure due to thermal motion.     

Simultaneous novel synthesis of conducting and non-conducting halogenated polymers by electroinitiation of (2,4,6-trichloro- or 2,6-dichlorophenolato)Ni(II) complexes

NiL₂(Ph)₂·xH₂O [L=3,5-dimethylpyrazole or N-methyl imidazole; Ph=DCP or TCP; x=0, 1 or 3] complexes were synthesised and characterised by analytical and spectroscopic methods using elemental analysis and FTIR. The electrochemical behavior of the complexes was studied by cyclic voltammetry in tetrabutylammoniumtetrafluoroborate-N,N-dimethylformamide electrolyte-solvent couple. Cyclic voltammogram of the complexes displayed two-step oxidation processes under the nitrogen gas atmosphere. The polymerization of the complexes was accomplished in the same solvent-electrolyte couple by the constant potential electrolysis of NiL₂(Ph)₂·xH₂O, synthesizing the poly(di- or monochlorophenylene oxide)s via free radical mechanism. The simultaneous polymerization of non-conducting polymer and conducting polymer (the conductivity of 0.7 S cm⁻²) were achieved by electroinitiated polymerization of Ni(DMPz)₂(TCP)₂. The structural analysis of the polymers were performed using FTIR, ¹H NMR and ¹³C NMR spectroscopic techniques and DSC for the thermal analysis. The kinetics of the polymerization was followed by in situ UV-vis spectrophotometer during the electrolysis. The low temperature ESR spectrum of the electrolysis solution also confirmed the formation of phenol radical (g=2.0028). One electron oxidation process of NiL₂(DCP)₂·xH₂O produces a new Ni(II) complex, Ni(L-L)(DCP)₂(S) by the rapid decomposition of Ni^IIIL₂(DCP)₂ into a ligand radical producing a singlet with the g value of 2.0015. Second electron oxidation process generates oligemers, which could not be isolated from the electrolyte solution.     

Synthesis of azobenzene-functionalized star polymers via RAFT and their photoresponsive properties

Azobenzene-functionalized star polymers were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. First, azobenzene-functionalized linear macro chain transfer agents (Macro-CTA) were synthesized by RAFT polymerization of 6-[4-(4′-Methoxyphenylazo)phenoxy]hexylmethacrylate (MAz6Mc) using 2-(2′-cyanopropyl)dithiobenzoate (CPDB) as RAFT agent in presence of AIBN as initiator in anisole. Subsequently, star azopolymers were synthesized by polymerization of a difunctional azomonomer, BMA2Az, with resultant Macro-CTA in presence of AIBN as initiator in anisole. Star azopolymers were characterized by GPC and spectroscopic methods. Thermal properties of star azopolymers were determined by DSC and TMA. Molecular weight versus conversion and molecular weight versus polymerization time attest to living polymerization characteristics. Photoisomerization behaviors of star azopolymers were studied by irradiation of both UV and visible light. Surface relief gratings were inscribed on star azopolymer films upon exposure to an interference pattern of (RCP + RCP) Ar⁺ laser. A diffraction efficiency of 20% was obtained by exposure of Star-8 K(2.6 K) polymer film to an (RCP + RCP) Ar⁺ laser for about 30 min. Surface relief grating structures were investigated by AFM and polarized optical microscopy.     

Synthesis of core-fluorescent four-armed star and dicyclic 8-shaped poly(THF)s by electrostatic self-assembly and covalent fixation (ESA–CF) protocol

A pair of four-armed star and dicyclic 8-shaped poly(tetrahydrofuran)s, poly(THF)s, possessing a perylene diimide group at the core position (Ia and Ib, respectively) were synthesized by means of an electrostatic self-assembly and covalent fixation (ESA–CF) protocol. Mono- and bifunctional poly(THF)s having N-phenylpiperidinium salt end groups accompanying a perylene diimide tetracarboxylate as a counteranion were prepared by the ion-exchange reaction, and the subsequent covalent conversion by reflux in toluene afforded the corresponding core-fluorescent four-armed star and dicyclic 8-shaped poly(THF)s, (Ia and Ib, respectively) for the use of single-molecule fluorescence microscopy measurements.     

Low-bandgap copolymers consisting of 2,1,3-benzoselenadiazole and carbazole derivatives with thiophene or selenophene π-bridges

Two donor–acceptor-type alternating copolymers consisting of 2,1,3-benzoselenadiazole and carbazole derivatives with thiophene or selenophene π-bridges were synthesized by Suzuki cross-coupling polymerization, and their optical, electrochemical, and photovoltaic properties were compared. The selenophene π-bridged copolymer (PCz-DSeBSe) exhibited a smaller band-gap (1.82 eV) than the thiophene-bridged polymer (PCz-DTBSe; 1.89 eV). PCz-DSeBSe also showed a deeper highest occupied molecular orbital energy level (−5.36 eV) than PCz-DTBSe (−5.20 eV). Moreover, the PCz-DSeBSe thin film showed higher crystallinity and hole mobility than the PCz-DTBSe thin film. Organic photovoltaic devices were fabricated using the polymers as the donors and [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) as the acceptor. The device using PCz-DSeBSe showed a higher open circuit voltage (V_oc), short circuit current density (J_sc), and power conversion efficiency (PCE) than that using PCz-DTBSe. The fabricated indium tin oxide/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/PCz-DSeBSe:PC₇₁BM/LiF/Al device showed the maximum PCE of 2.88% with a J_sc of 7.87 mA/cm², an V_oc of 0.80 V, and a fill factor of 0.50 under AM 1.5G irradiation (100 mW/cm²).     

Synthesis of amphiphilic heteroarm star‐shaped polymer via free radical polymerization using polyfunctional chain transfer agent and its self‐assembly behavior

Amphiphilic heteroarm star‐shaped polymers have important theoretical and practical significance. In this work, amphiphilic heteroarm star‐shaped polymer was synthesized by the use of polyfunctional chain transfer agent via sequential free radical polymerization in two steps. First, conventional free radical polymerization of methyl methacrylate (MMA) initiated by 2,2′‐azobis (isobutyronitrile) (AIBN) was carried out in the presence of polyfunctional chain transfer agent, pentaerythritol‐tertrakis (3‐mercaptopropinate) (PETMP). At appropriate monomer conversion, about two‐arm s‐PMMA having two residual thiol groups at the chain center was obtained. Second, the s‐PMMA obtained above was used as macro‐chain‐transfer agent for free radical polymerization of acrylic acid (AA). The heteroarm star‐shaped polymer with the hydrophobic PMMA segment and the hydrophilic PAA segment was obtained. The successful synthesis of heteroarm star‐shaped polymers, (PMMA)₂(AA)₂, was confirmed by ¹H‐NMR and its self‐assembly behavior in different solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

NMR studies of thermo-responsive behavior of an amphiphilic poly(asparagine) derivative in water

The thermo-responsive behavior of a unique biocompatible polymer, poly(N-substituted α/β-asparagine) derivative (PAD), has been studied with several NMR methods. The ¹H and ¹³C solution NMR measurements of the PAD in DMSO-d₆ were used to investigate the isolated polymer and perform spectral assignments. By systematic addition of D₂O we have tracked structural changes due to aggregation and observed contraction of hydrophilic side chains. Solution and cross polarization/magic angle spinning (CP/MAS) ¹³C NMR approaches were implemented to investigate the aggregates of the PAD aqueous solution during the liquid to gel transition as the temperature was increased. At temperatures near 20 °C, all of the peaks from the PAD were observed in the ¹³C CP/MAS and ¹³C solution NMR spectra, indicating the presence of polymer chain nodes. Increasing the temperature to 40 °C resulted in a partial disentanglement of the nodes due to thermal agitation and further heating resulted in little to no additional structural changes. Deuterium T₁–T₂ and T₂–T₂ two-dimensional relaxation spectroscopies using an inverse Laplace transform, were also implemented to monitor the water–PAD interaction during the phase transition. At temperatures near 20 °C the dynamical characteristics of water were manifested into one peak in the deuterium T₁–T₂ map. Increasing the temperature to 40 °C resulted in several distinguishable reservoirs of water with different dynamical characteristics. The observation of several reservoirs of water at the temperature of gel formation at 40 °C is consistent with a physical picture of a gel involving a network of interconnected polymer chains trapping a fluid. Further increase in temperature to 70 °C resulted in two non-exchanging water reservoirs probed by deuterium T₂–T₂ measurements.     

Synthesis of ultrahigh molecular weight phenolic polymers by enzymatic polymerization in the presence of amphiphilic triblock copolymer in water

An enzymatic oxidative polymerization of phenols was investigated in the presence of poly(ethylene glycol) (PEG)-poly(propylene glycol) (PPG)-poly(ethylene glycol) (PEG) triblock copolymer (Pluronic) in water. The formation of micellar aggregate of phenol and Pluronic by hydrogen bonding interaction in an aqueous solution was verified by DLS measurement. The PEG content of Pluronic greatly affected the polymerization behaviors. Using Pluronic with high PEG content improved the regioselectivity of the polymerization of phenol to give the polymer mainly consisting of phenylene unit. The polymerization in the presence of Pluronic F68 (EG₇₆-PG₂₉-EG₇₆) produced the phenolic polymer with ultrahigh molecular weight (M_w > 10⁶). From other phenols, high molecular weight polymers were also obtained. In addition, the FT-IR, DSC, and XRD analyses exhibited the formation of miscible complex between the phenolic polymer and Pluronic by hydrogen bonding interaction.     

A soluble conducting polymer: 1-Phenyl-2,5-di(2-thienyl)-1H-pyrrole and its electrochromic application

A thiophene-functionalized monomer 1-phenyl-2,5-di(2-thienyl)-1H-pyrrole (PTP) was synthesized. The chemical polymerization of PTP (CPTP) was realized by using FeCl₃ as the oxidant. The structures of both the monomer and the soluble polymer (CPTP) were investigated by Nuclear Magnetic Resonance (¹H and ¹³C NMR) and Fourier Transform Infrared (FTIR). The average molecular weight of the chemically synthesized polymer was determined by gel permeation chromatography (GPC) as Mn = 7.2 × 10³. The electrochemical oxidative polymerization of PTP was carried out via constant-potential electrolysis. Characterizations of the resulting polymer were done by cyclic voltammetry (CV), FTIR, Scanning Electron Microscopy (SEM) and UV-vis Spectroscopy. The conductivity of sample was measured by four-probe technique. Moreover, the spectroelectrochemical and electrochromic properties of the polymer film were investigated. Spectroelectrochemical analysis of P(PTP) revealed electronic transitions at 413, 577 and 884 nm corresponding to π-π^* transition, polaron, and bipolaron band formations, respectively. Kinetic studies evaluated the switching ability of the P(PTP); the percent transmittance T% was found as 27%. The homopolymer of PTP was used to construct dual-type polymer electrochromic devices (ECDs) against poly(3,4-ethylenedioxythiophene) (PEDOT). Spectroelectrochemistry, electrochromic switching and open circuit stability of the devices were investigated.     

Synthesis, characterization, and properties of chain terminated polyhedral oligomeric silsesquioxane-functionalized perfluorocyclobutyl aryl ether copolymers

A new class of perfluorocyclobutyl (PFCB) polymers covalently functionalized with polyhedral oligomeric silsesquioxane (POSS) is presented. Three discreetly functionalized POSS monomers possessing thermally reactive trifluorovinyl aryl ether (TFVE) were prepared in good yields. The POSS TFVE monomers were prepared by initial corner-capping of cyclopentyl (-C₅H₉), iso-butyl (-CH₂CH(CH₃)₂), or trifluoropropyl (-CH₂CH₂CF₃) functionalized POSS trisilanols with acetoxyethyltrichlorosilane followed by sequential acid-catalyzed deprotection and coupling with 4-(trifluorovinyloxy)benzoic acid. TFVE-functionalized POSS monomers were thermally polymerized with 4,4′-bis(4-trifluorovinyloxy)biphenyl or 2,2-bis(4-trifluorovinyloxybiphenyl)-1,1,1,3,3,3-hexafluoropropane monomers via a condensate-free, [2 + 2] step-growth polymerization. The polymerization afforded solution processable PFCB polymers with POSS macromer installed on the polymer chain ends. POSS monomers and their corresponding copolymers were characterized by ¹H, ¹³C, ¹⁹F, and ²⁹Si NMR, GPC, ATR-FTIR, and elemental combustion analysis. GPC trace analysis showed agreeable number-average molecular weight for various weight percent of cyclopentyl or iso-butyl and trifluoropropyl chain terminated POSS PFCB copolymers. DSC analysis showed the introduction of increasing POSS weight percent in the endcapped PFCB copolymers lowers the glass transition temperatures as high as 31 °C. On the other hand, the trifluoropropyl POSS endcapped PFCB polymer glass transition temperature was unaffected when copolymerized with the more fluorinated 2,2-bis(4-trifluorovinyloxybiphenyl)-1,1,1,3,3,3-hexafluoropropane monomer. TGA analysis of POSS PFCB copolymers showed step-wise decomposition of copolymers resulting from the initial degradation of the POSS cages at 297-355 °C in nitrogen and air which was confirmed by pyrolysis coupled with GC-MS. This initial weight loss was proportional to the weight percent of POSS incorporated into the polymer. The balance of decomposition was observed at 450-563 °C in nitrogen and air which is higher than the PFCB homopolymers in most cases. Polymer surface characterization was performed on spin cast transparent, flexible films. These composite films exhibited good POSS dispersion within the matrix PFCB polymer as was shown by TEM analysis.     

Synthesis and characterization of polystyrene-b-tetraaniline stars from polystyrene stars with surface reactive groups prepared via ATRP

Functionalized star polymers with tetraaniline on their surface have been successfully prepared by substitution reaction of N-succinimidyl-terminated star polymers with tetraaniline. A novel functional initiator bearing N-succinimidyl group was used in atom transfer radical polymerization (ATRP) of styrene, and polystyrenes (PSts) having N-succinimidyl groups with narrow molecular weight distribution were obtained. The star polymers with reactive N-succinimidyl groups on their surface were synthesized by ATRP of divinylbenzene (DVB). The N-succinimidyl-terminated PSt, polymer stars with surface N-succinimidyl groups and the PSt-b-tetraaniline stars were characterized by ¹H NMR spectroscopy, FT-IR and gel permeation chromatography.     

Bulk polymerization of vinyl chloride with half-titanocene/MAO catalyst

Bulk polymerization of vinyl chloride (VC) with Cp^∗Ti(OPh)₃/MAO catalyst was investigated. The bulk polymerization of VC with Cp^∗Ti(OPh)₃/MAO catalyst proceeded to give poly(vinyl chloride) (PVC) with high molecular weight in good yields. The M_n of the polymer increased in direct proportion to polymer yields and the line passed through the origin. The M_w/M_n of the polymer decreased with an increase of polymer yield. The GPC elution curves were unimodal and the whole curves shifted clearly to the higher molecular weight as a function of reaction time. This indicates that the control of molecular weight can be achieved in the polymerization of VC with Cp^∗Ti(OPh)₃/MAO catalyst even in bulk. The structure of PVC obtained from the bulk polymerization of VC with Cp^∗Ti(OPh)₃/MAO catalyst consists of a regular structure. The thermal stability of the polymer obtained with Cp^∗Ti(OPh)/MAO catalyst was higher than that of PVC obtained from radical polymerization and depended on the molecular weight of the polymer. In contrast to that, the initial decomposition temperature of the polymer obtained from a radical polymerization did not depend on the molecular weight. We presumed that the decomposition of the polymer obtained with Cp^∗Ti(OPh)₃/MAO catalyst initiated at the chain end.