Intramolecular Photochemical Cross‐Coupling Reactions of 3‐Acyl‐2‐haloindoles and 2‐Chloropyrrole‐3‐carbaldehydes with Substituted Benzenes

Highly efficient syntheses of indolo[2,1‐a]isoquinolines, indolo[2,1‐a][2]benzazepines, pyrrolo[2,1‐a]isoquinolines and pyrrolo[1,2‐a]benzazepines in excellent yields have been achieved by the intramolecular photochemical cross‐coupling reactions of 3‐acyl‐2‐halo‐N‐(ω‐arylalkyl)indoles and 2‐chloro‐N‐(ω‐arylalkyl)pyrrole‐3‐carbaldehydes in acetone. A new heterocyclic ring system – pyrrolo[1,2‐d][1,4]benzoxazepine – has also been constructed for the first time in this work by the photocyclization of 2‐chloro‐N‐(2‐phenoxyethyl)pyrrole‐3‐carbaldehyde.     

Iridium‐Catalyzed Asymmetric Allylic Etherification and Ring‐Closing Metathesis Reaction for Enantioselective Synthesis of Chromene and 2,5‐Dihydrobenzo[b]oxepine Derivatives

Iridium‐catalyzed asymmetric etherifications of allylic carbonates with 2‐vinylphenols and 2‐allylphenols were realized. With a catalyst generated from 2 mol% of [Ir(cod)Cl]₂ (cod=cycloocta‐1,5‐diene) and 4 mol% of the phosphoramidite ligand L2 , the etherification products were obtained in excellent ees and then subjected to the ring‐closing metathesis reaction providing an efficient synthesis of enantioenriched 2H‐chromene and 2,5‐dihydrobenzo[b]oxepine derivatives.     

New Indenylidene‐Schiff Base‐Ruthenium Complexes for Cross‐Metathesis and Ring‐Closing Metathesis

We here report on the stability and catalytic activity of new indenylidene‐Schiff base‐ruthenium complexes 3a – f through representative cross‐metathesis (CM) and ring‐closing metathesis (RCM) reactions. Excellent activity of the new complexes was found for the two selected RCM reactions; prominent conversion was obtained compared to the commercial Hoveyda–Grubbs catalyst 2 . Moreover, excellent results were obtained for a standard CM reaction. Higher conversions were achieved with one of the indenylidene catalysts compared with Hoveyda–Grubbs catalyst. Unexpectedly, an isomerization reaction was observed during the CM reaction of allylbenzene. To the best of our knowledge, isomerization reactions in this model CM reaction in closed systems have never been described using first generation catalysts, including the Hoveyda–Grubbs catalyst. The first model CM reactions as well as the RCM reactions have been monitored using ¹H NMR. The course of the CM reaction of 3‐phenylprop‐1‐ene ( 8 ) and cis‐1,4‐diacetoxybut‐2‐ene ( 9 ) was monitored by GC. The isomerization reaction was studied by means of GC‐mass spectrometry and in situ IR spectroscopy. All catalysts were structurally characterized by means of ¹H, ¹³C, and ³¹P NMR spectroscopy.     

Copper(I)‐Catalyzed [3+2] Cycloaddition/Ring‐Opening Rearrangement/[4+2] Cycloaddition/Aromatization Cascade: An Unprecedented Chemo‐ and Stereoselective Three Component Coupling of Sulfonyl Azide,Alkyne and N‐Arylidenepyridin‐2‐ amine to Pyrido[1,2‐a]pyrimidin‐4‐imine

A novel synthetic protocol for the one‐pot chemo‐ and stereoselective construction of diversely functionalized pyrido[1,2‐a]pyrimidin‐4‐imines via copper(I)‐catalyzed [3+2] cycloaddition/ring‐opening rearrangement/[4+2] cycloaddition/aromatization cascade of sulfonyl azides, alkynes and N‐arylidenepyridin‐2‐amines under mild reaction conditions is reported. In addition, the catalytic activity of copper(I)‐modified zeolite, a recyclable, heterogeneous catalyst is also investigated, which gives improved yield compared to its homogeneous equivalents.     

Controlled Reversible Anchoring of η6‐Arene/TsDPEN‐ Ruthenium(II) Complex onto Magnetic Nanoparticles: A New Strategy for Catalyst Separation and Recycling

A new catalyst separation and recycling protocol combining magnetic nanoparticles and host‐guest assembly was developed. The catalyst, (η⁶‐arene)[N‐(para‐toluenesulfonyl)‐1,2‐diphenylethylenediamine]ruthenium trifluoromethanesulfonate [Ru(OTf)(TsDPEN)(η⁶‐arene)] bearing a dialkylammonium salt tag, was easily separated from the reaction mixtures by magnet‐assisted decantation, on basis of the formation of a pseudorotaxane complex by using dibenzo[24]crown‐8‐modified Fe₃O₄ nanoparticles. The ruthenium catalyst has been successfully reused at least 5 times with the retention of enantioselectivity but at the expense of relatively low catalytic activities in the asymmetric hydrogenation of 2‐methylquinoline.     

Gold(I)‐Catalyzed Tandem Alkoxylation/Lactonization of γ‐Hydroxy‐α,β‐Acetylenic Esters

The formation of 4‐alkoxy‐2(5H)‐furanones was achieved via tandem alkoxylation/lactonization of γ‐hydroxy‐α,β‐acetylenic esters catalyzed by 2 mol% of [2,6‐bis(diisopropylphenyl)imidazol‐2‐ylidine]gold bis(trifluoromethanesulfonyl)imidate [Au(IPr)(NTf₂)]. The economic and simple procedure was applied to a series of various secondary propargylic alcohols allowing for yields of desired product of up to 95%. In addition, tertiary propargylic alcohols bearing mostly cyclic substituents were converted into the corresponding spiro derivatives. Both primary and secondary alcohols reacted with propargylic alcohols at moderate temperatures (65–80 °C) in either neat reactions or using 1,2‐dichloroethane as a reaction medium allowing for yields of 23–95%. In contrast to [Au(IPr)(NTf₂)], reactions with cationic complexes such as [2,6‐bis(diisopropylphenyl)imidazol‐2‐ylidine](acetonitrile)gold tetrafluoroborate [Au(IPr)(CH₃CN)][BF₄] or (μ‐hydroxy)bis{[2,6‐bis(diisopropylphenyl)imidazol‐2‐ylidine]gold} tetrafluoroborate or bis(trifluoromethanesulfonyl)imidate – [{Au(IPr)}₂(μ‐OH)][X] (X=BF₄, NTf₂) – mostly stop after the alkoxylation. Analysis of the intermediate proved the exclusive formation of the E‐isomer which allows for the subsequent lactonization.     

An iron‐based reverse ATRP process for the living radical polymerization of acrylonitrile

A hexa‐substituted ethane thermal iniferter, diethyl‐2,3‐dicyano‐2,3‐di(p‐tolyl) succinate (DCDTS), was firstly used as the initiator in the reverse atom transfer radical polymerization (RATRP) of acrylonitrile. FeCl₃ coordinated by isophthalic acid (IA) was used as the catalyst in this system. The polymerization in N,N‐dimethylformamide not only shows the best control of molecular weight and its distribution but also provides rather rapid reaction rate with the ratio of [AN] : [DCDTS] : [FeCl₃] : [IA] at 500 : 1 : 2 : 4. The polymers obtained were end‐functionalized by chlorine atom, and they were used as macroinitiators to proceed the chain extension polymerization in the presence of FeCl₂/IA catalyst system via a conventional ATRP process and polyacrylonitrile obtained was with M_n = 39,260, PDI = 1.25. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Rhodium‐Catalyzed Tandem Isomerization/Hydroformylation of the Bio‐Sourced 10‐Undecenenitrile: Selective and Productive Catalysts for Production of Polyamide‐12 Precursor

The hydroformylation of 10‐undecenenitrile ( 1 ) – a substrate readily prepared from renewable castor oil – in the presence of rhodium‐phosphane catalysts systems is reported. The corresponding linear aldehyde ( 2 ) can be prepared in high yields and regioselectivities with a (dicarbonyl)rhodium acetoacetonate‐biphephos [Rh(acac)(CO)₂‐biphephos] catalyst. The hydroformylation process is accompanied by isomerization of 1 into internal isomers of undecenenitrile ( 1‐int ); yet, it is shown that the Rh‐biphephos catalyst effectively isomerizes back 1‐int into 1 , eventually allowing high conversions of 1 / 1‐int into 2 . Recycling of the catalyst by vacuum distillation under a controlled atmosphere was demonstrated over 4–5 runs, leading to high productivities up to 230,000 mol ( 2 )⋅mol (Rh)⁻¹ and 5,750 mol ( 2 )⋅mol (biphephos)⁻¹. Attempted recycling of the catalyst using a thermomorphic multicomponent solvent (TMS) phase‐separation procedure proved ineffective because the final product 2 and the Rh‐biphephos catalyst were always found in the same polar phase. Auto‐oxidation of the linear aldehyde 2 into the fatty 10‐cyano‐2‐methyldecanoic acid ( 5 ) proceeds readily upon exposure to air at room temperature, opening a new effective entry toward polyamide‐12.

     

Oxadiazoline and Ketoimine Palladium(II) Complexes as Highly Efficient Catalysts for Suzuki–Miyaura Cross‐Coupling Reactions in Supercritical Carbon Dioxide

The [2+3] cycloaddition of nitriles (RCN) with 2,2‐dimethyl‐3,4‐dihydro‐2H‐pyrrole 1‐oxide, in the presence of palladium dichloride (PdCl₂) gives the corresponding 2,3‐dihydro[1.2.4]oxadiazole (Δ⁴‐1,2,4‐oxadiazoline) palladium(II) complexes 1 – 4 in good yields. However, the Pd(II)‐assisted reaction of pentafluorobenzonitrile with the same pyrroline N‐oxide gives a mixture of oxadiazoline 5 , ketoimine 6 and pyrrolylbenzamide‐ketoimine 7 Pd(II) complexes, which affords upon heating in refluxing acetone the unprecedented fused tricyclic ketoimine complex 8 as the exclusive product. Under heating, compounds 5 and 7 transform to 6 , the latter undergoing intramolecular cyclization by nucleophilic attack of the amino moiety to the ortho carbon of the pentafluorophenyl ring leading ultimately to 8 . The compounds were characterized by IR, ¹H and ¹³C NMR, ESI⁺‐MS, elemental analyses and, in the cases of 3 , 6 , 7 and 8 , also by X‐ray diffraction analyses. The catalytic properties of the Pd complexes were evaluated in Suzuki–Miyaura cross‐coupling reactions, using supercritical carbon dioxide (scCO₂) as a green solvent. Cross‐couplings of aryl halides with phenylboronic acid give the desired biaryl products in quantitative yields, in a short reaction time, for substrate‐to‐catalyst molar ratios as high as 4.0⋅10⁴.     

Poly(pent‐1‐ene) Synthesized with the Syndiospecific Catalyst i‐Pr(Cp)(9‐Flu)ZrCl2/MAO

1‐Pentene was polymerized with the syndiospecific catalyst system i‐PrC(Cp)(9‐fluorenyl)ZrCl₂/MAO. The molar mass of the resulting polymers depends strongly on the reaction temperature and decreases from M̄_w = 126 000 at 0°C to M̄_w = 46 000 at 100°C, but is more or less independent of the monomer and the MAO concentration. The influence of reaction temperature and concentrations of MAO and monomer on the type of end‐groups generated during the chain termination, as well as on the type of stereoerror, was investigated. The degree of tacticity was dependent on the polymerization temperature with [rrrr] > 0.99 at 0°C and [rrrr] = 0.75 at 100°C.     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

Palladium‐Catalyzed Efficient and One‐Pot Synthesis of Diarylacetylenes from the Reaction of Aryl Chlorides with 2‐Methyl‐3‐butyn‐2‐ol

An efficient and practical synthetic method has been developed for the preparation of symmetrical diarylacetylenes from the direct reaction of aryl chlorides with 2‐methyl‐3‐butyn‐2‐ol catalyzed by palladium(II) chloride‐bis(tricyclohexylphosphine) [PdCl₂(PCy₃)₂] under mild reaction conditions. Unsymmetrical diarylated acetylenes could be also obtained by using two different aryl chlorides simultaneously. The catalytic procedure includes a novel one‐pot palladium‐catalyzed, double Sonogashira coupling of inactivated aryl chlorides without use of copper(I) as co‐catalyst.     

Palladium(II) Complexes of C2‐Bridged Chiral Diphosphines: Application to Enantioselective Carbonyl‐Ene Reactions

(11bR,11′bR)‐4,4′‐(1,2‐Phenylene)bis[4,5‐dihydro‐3H‐dinaphtho[2,1‐c:1′,2′‐e]phosphepin] [abbreviated as (R)‐BINAPHANE], (3R,3′R,4S,4′S,11bS,11′bS)‐4,4′‐bis(1,1‐dimethylethyl)‐4,4′,5,5′‐tetrahydro‐3,3′‐bi‐3H‐dinaphtho[2,1‐c:1′,2′‐e]phosphepin [(S)‐BINAPINE], (1S,1′S,2R,2′R)‐1,1′‐bis(1,1‐dimethylethyl)‐2,2′‐biphospholane [(S,S,R,R)‐TANGPHOS] and (2R,2′R,5R,5′R)‐1,1′‐(1,2‐phenylene)bis[2,5‐bis(1‐methylethyl)phospholane] [(R,R)‐i‐Pr‐DUPHOS] are C₂‐bridged chiral diphosphines that form stable complexes with palladium(II) and platinum(II) containing a five‐membered chelate ring. The Pd(II)‐BINAPHANE catalyst displayed good to excellent enantioselectivities with ee values as high as 99.0% albeit in low yields for the carbonyl‐ene reaction between phenylglyoxal and alkenes. Its Pt(II) counterpart afforded improved yields while retaining satisfactory enantioselectivity. For the carbonyl‐ene reaction between ethyl trifluoropyruvate and alkenes, the Pd(II)‐BINAPHANE catalyst afforded both good yields and extremely high enantioselectivities with ees as high as 99.6%. A comparative study on the Pd(II) catalysts of the four C₂‐bridged chiral diphosphines revealed that Pd(II)‐BINAPHANE afforded the best enantioselectivity. The ee values derived from Pd(II)‐BINAPHANE are much higher than those derived from the other three Pd(II) catalysts. A comparison of the catalyst structures shows that the Pd(II)‐BINAPHANE catalyst is the only one that has two bulky (R)‐binaphthyl groups close to the reaction site. Hence it creates a deep chiral space that can efficiently control the reaction behavior in the carbonyl‐ene reactions resulting in excellent enantioselectivity.     

Superbase‐Catalyzed [4+2] Cycloaddition of Acetylenes to 3,6‐Di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine: A Facile Synthesis of 3,6‐Di(pyrrol‐2‐yl)pyridazines

Acetylenes undergo the [4+2] cycloaddition to 3,6‐di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine in the potassium hydroxide/dimethyl sulfoxide or potassium tert‐butoxide/dimethyl sulfoxide systems (80 °C, 2.5–4 h) to afford (after extrusion of the nitrogen molecule from the intermediate) 3,6‐di(pyrrol‐2‐yl)pyridazines in up to 73% yield, while under non‐catalytic conditions this reaction does not take place. This unusual result substantially extends the scope of synthetic application and mechanistic diversity of the Diels–Alder reaction. The step‐wise mechanisms involving the formation of [OH/tetrazine]⁻ or [t‐BuO/tetrazine]⁻ anionic intermediate complexes or cycloaddition of tetrazine to the acetylide anion are considered.     

Improved conversion of 6‐endo‐tosyloxybicyclo[2.2.2]octan‐2‐ones into 6‐exo‐acetoxy and 6‐exo‐benzoyloxybicyclo[2.2.2]octan‐2‐ones

The reaction conditions for the conversion of 6‐endo‐tosyloxybicyclo[2.2.2]octan‐2‐one ( 7b ) into 6‐exo‐acetoxy ( 8b ) and 6‐exo‐benzoyloxybicyclo[2.2.2]octan‐2‐one ( 8a ), respectively, were improved. Thus known 6‐endo‐tosyloxy‐bicyclo[2.2.2]octan‐2‐ones (+)‐(1RS,6SR,8SR,11RS)‐11‐[(4‐toluenesulfonyl)oxy]tricyclo[6.2.2.0^1,6]dodecan‐9‐one ( 1a ), 13‐methyl‐15‐oxo‐9β,13b‐ethano‐9β‐podocarpan‐12β‐yl‐4‐toluenesulfonate ( 3a ), and methyl (13R)‐16‐oxo‐13‐[(4‐tolylsulfonyl)oxy]‐17‐noratisan‐18‐oate ( 5 ), were converted,in comparable yields, as previously recorded, but much shorter times, into (+)‐(1RS,6SR,8SR,11SR)‐11‐(benzoyloxy) tricyclo[6.2.2.0^1,6]dodecan‐9‐one ( 2 ), 13‐methyl‐15‐oxo‐9β,13β‐ethano‐9β‐podocarpan‐12α‐yl benzoate ( 4 ), and methyl (13S)‐13‐(benzoyloxy)‐16‐oxo‐17‐noratisan‐18‐oate ( 6 ), respectively.     

A new post‐metallocene catalyst for alkene polymerization: copolymerization of ethylene and 1‐hexene with titanium complexes bearing N,N‐dialkylcarbamato ligands

A new type of post‐metallocene polymerization catalyst based on titanium complexes with N,N‐dialkylcarbamato ligands was used to copolymerize ethylene and 1‐hexene. These easy‐to‐synthesize and stable complexes in combination with different organoaluminium co‐catalysts produce random ethylene/1‐hexene copolymers characterized by a broad molecular weight distribution and high 1‐hexene incorporation, as confirmed by SEC, DSC and ¹³C NMR analysis. The influence of the main reaction parameters on the polymerization reactions was studied including the type of catalyst components, solvent, temperature, the ethylene partial pressure and the [Al]/[Ti] ratio in the catalyst. A higher activity and a higher 1‐hexene incorporation were achieved with AlMe₃‐depleted methylalumoxane as co‐catalyst and chlorobenzene as solvent. © 2013 Society of Chemical Industry     

Kinetics of azo‐initiated 1‐vinyl‐2‐pyrrolidone polymerizations at low conversions in aqueous media

The free‐radical polymerization behavior of 1‐vinyl,2‐pyrrolidone (NVP) was studied at low conversions, using capillary dilatometry. The aqueous media were kept at neutral pH and the studies were conducted isothermally, at 40 or 45°C. The azo‐type initiators used were 4,4′‐azobis‐4‐cyanopentanoic acid (ACPA), 2,2′‐azobisisobutyronitrile (AZBN), and 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane dihydrochloride] (ABDH). The monomer concentration and initiator concentration ranges were 1.17–2.34 mol L⁻¹ and 1–8 mmol L⁻¹, respectively. The rates of polymerization (R_p) and orders of reaction with respect to NVP and the initiator were evaluated and the kinetic equations were found to be R_p ∝ [NVP] [ACPA]^1.2; R_p ∝ [NVP] [AZBN]^1.1; and R_p ∝ [NVP]^2.2 [ABDH]^1.1. The polymers obtained were characterized by their viscosity numbers and correlation of the viscosity average molecular weights made with the type and amount of the azo initiator. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 239–246, 2000     

Highly Enantioselective Hydrogenation of Quinoline and Pyridine Derivatives with Iridium‐(P‐Phos) Catalyst

The use of a chiral iridium catalyst generated in situ from the (cyclooctadiene)iridium chloride dimer, [Ir(COD)Cl]₂, the P‐Phos ligand [4,4′‐bis(diphenylphosphino)‐2,2′,6,6′‐tetramethoxy‐3,3′‐bipyridine] and iodine (I₂) for the asymmetric hydrogenation of 2,6‐substituted quinolines and trisubstituted pyridines [2‐substituted 7,8‐dihydroquinolin‐5(6H)‐one derivatives] is reported. The catalyst worked efficiently to hydrogenate a series of quinoline derivatives to provide chiral 1,2,3,4‐tetrahydroquinolines in high yields and up to 96% ee. The hydrogenation was carried out at high S/C (substrate to catalyst) ratios of 2000–50000, reaching up to 4000 h⁻¹ TOF (turnover frequency) and up to 43000 TON (turnover number). The catalytic activity is found to be additive‐controlled. At low catalyst loadings, decreasing the amount of additive I₂ was necessary to maintain the good conversion. The same catalyst system could also enantioselectively hydrogenate trisubstituted pyridines, affording the chiral hexahydroquinolinone derivatives in nearly quantitative yields and up to 99% ee. Interestingly, increasing the amount of I₂ favored high reactivity and enantioselectivity in this case. The high efficacy and enantioselectivity enable the present catalyst system of high practical potential.     

Highly Stereoselective Synthesis of Novel Multistereogenic Bis‐Bifunctional Ligands Based on [2.2]Paracyclophane‐ 4,7‐quinone,their Structure Elucidation and Application in Asymmetric Catalysis

Bis‐bifunctional cis‐4,7‐diarylsubstituted‐4,7‐dihydroxy‐4,7‐dihydro[2.2]paracyclophanes 3–6 were synthesized by a highly diastereoselective reaction of ortho‐substituted aryllithium reagents with [2.2]paracyclophane‐4,7‐quinone ( 1 ). Enantiomerically pure diols 3–5 were tested as chiral inductors in the enantioselective addition of diethylzinc to benzaldehyde (up to 93.5% ee). Acid dehydration of cis‐4,7‐di(2‐methoxyphenyl)‐4,7‐dihydroxy‐4,7‐dihydro[2.2]paracyclophane ( 3 ) results in 4,7‐dihydro‐7,8‐di(2‐methoxyphenyl)[2.2]paracyclophane‐4‐one ( 8 ) – a planar chiral cyclohexadienone of the [2.2]paracyclophane series with a para‐semiquinoid substructure. X‐Ray investigations of compounds 3, 4 and 8 were performed.     

New investigation of 1‐substituted imidazole derivatives as thermal latent catalysts for epoxy‐phenolic resins

Novel 1‐substituted imidazole derivatives ( 4 – 10 ) were synthesized by imidazole and the corresponding substituted reagents (chloromethylpivalate, diphenylphosphinicchloride, di‐tert‐butyldicarbonate, 1,1′‐oxalylchloride, pyrazine, phneylisocyanat, and p‐toluensulfonylchloride). Polymerization of diglycidyl ether of bisphenol A (DGEBA) with 1‐substituted imidazole derivatives, two commercial available catalysts (imidazole and 1‐cyanoethyl‐2‐ethyl‐4‐methylimidazole) and N‐benzylpyrazinium hexafluoroantimonate were investigated as model reactions of epoxy resin systems with respect to the thermal latency and storage stability of the catalysts. The catalytic activity of 1‐substituted imidazole derivatives 4 – 10 depended on the steric and withdrawing electronic effect of the substitution groups. To characterize the cure activation energy and the viscosity‐storage time, the order of thermally latent activity is 1‐tosylimidazole ( 6 ) > 1,1′‐oxalyldiimidazole ( 8 ) > N‐benzylpyrazinium hexafluoroantimonate (BPH, 3 ) > 1‐tritylimidazole ( 9 ) > N‐phenyl‐imidazole‐1‐carboxamide ( 5 ) > 3‐(diphenylphosphinoyl)imidazole ( 7 ) > tert‐butyl‐1H‐imidazole‐1‐carboxylate ( 4 ) > 1‐cyanoethyl‐2‐ethyl‐4‐methylimidazole (2E4MZ, 2 ) > 1‐[(pivalyloxy)methyl]imidazol ( 10 ) > imidazole ( 1 ). In comparison with commercially available catalysts imidazole ( 1 ) and 1‐cyanoethyl‐2‐ethyl‐4‐methylimidazole ( 2 ) and a cationic latent catalyst N‐benzylpyrazinium hexafluoroantimonate (BPH, 3 ) as the standard compounds, in addition to 1‐[(pivalyloxy)methyl]imidazole ( 10 ), the 1‐substituted imidazole derivatives ( 4 – 9 ) revealed better thermal latency. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007