Hybrid high performance supercapacitor based on zeolitic imidazolate frameworks-67-derived nano-structure NiCo2S4

In this work, NiCo₂S₄, nickel-cobalt layered double hydroxides (NiCo-LDH) and CoS₂ electrodes are successfully prepared by using ZIF-67 as the precursor, the results show that NiCo-LDH and NiCo₂S₄ are nano-flower-like structures and CoS₂ exhibits a nano-cage structure. The electrochemical properties of the hybrid supercapacitor assembled with NiCo₂S₄ and activated carbon (AC) as electrodes were tested. As the positive electrode of NiCo₂S₄//AC hybrid supercapacitor, the NiCo₂S₄ electrode has the largest specific capacity of 2934 mAh g^?1 at a current density of 1 A g^?1. The NiCo₂S₄//AC capacitor generates the highest energy density of 38.8 Wh kg^?1 when the power density is 993.0 W kg^?1 and has a nice cycling performance with a capacity retention rate of 81.2% after 10,000 cycles at 5 A g^?1.     

Facile fabrication of comb-like porous NiCo2O4 nanoneedles on Ni foam as an advanced electrode for high-performance supercapacitor

It is very desirable to develop the high-performance supercapacitors to meet the rapidly growing demands for energy-autonomous operation and miniaturization of devices. Herein, comb-like porous NiCo₂O₄ nanoneedles on the three-dimension (3D) nickel foam (NF) have been successfully synthesized through a facile pulsed laser ablation (PLA) approach without any post-treatments and surfactant (denoted as NiCo₂O₄-PLA). The influence of working solution during the fabricated process on the properties of NiCo₂O₄-PLA has been demonstrated in detail in terms of the crystalline structure, specific surface area, morphology, and electrochemical performance. Benefiting from the large specific surface (261.4 m² g⁻¹), abundant pores, and highly conductive scaffold, the NiCo₂O₄-PLA binder-free electrode exhibits an outstanding specific capacitance (1650 F g⁻¹ at a current density of 1 A g⁻¹) and eminent cycling performance (91.78% retention after a 12,000-cycle test at a current density of 10 A g⁻¹) compared with the control samples. The assembled asymmetric device (NiCo₂O₄-PLA//AC-ASCs) delivers the high specific capacitance of 126.9 F g⁻¹ at the current density of 1 A g⁻¹, the large energy density of 56.7 Wh kg⁻¹ at a power density of 756 W kg⁻¹, and the low internal resistance. The attractive results strongly prove that it is an ideal candidate for advanced supercapacitor application.     

Electrochemically synthesized nanocrystalline spinel thin film for high performance supercapacitor

Spinels are not known for their supercapacitive nature. Here, we have explored electrochemically synthesized nanostructured NiCo₂O₄ spinel thin-film electrode for electrochemical supercapacitors. The nanostructured NiCo₂O₄ spinel thin film exhibited a high specific capacitance value of 580 F g⁻¹ and an energy density of 32 Wh kg⁻¹ at the power density of 4 kW kg⁻¹, accompanying with good cyclic stability.     

Nickel–cobalt layered double hydroxide/NiCo2S4/g-C3N4 nanohybrid for high performance asymmetric supercapacitor

Graphitic carbon nitride (g-C₃N₄) with semiconducting nature can be considered for energy storage system by modifying its electrical conductivity and structural properties through formation of hybrid with materials such as bimetallic metal sulfide and nickel-cobalt layered double hydroxide (LDH). g-C₃N₄ as a N-rich compound with basic surface sites can change the surface properties of nanohybrid and impress the charge transfer. In this study, a nanohybrid based on nickel-cobalt LDH and sulfide and graphitic carbon nitride (NiCo LDH/NiCo₂S₄/g-C₃N₄) was synthesized through a three-step method. At first, Ni doped ZIF-67 was formed at the surface of g-C₃N₄ nanosheets and then the product was calcined in a furnace to form NiCo₂O₄/g-C₃N₄. At next step, the sample was hydrothermally converted to NiCo₂S₄/g-C₃N₄ using thioacetamide and finally modified with NiCo LDH nanoplates to form porous structure with high surface area. The NiCo LDH/NiCo₂S₄/g-C₃N₄ nanohybrid showed high specific capacitance of 1610 F g^?1 at current density of 1 A g^?1 and also excellent stability of 108.8% after 5000 cycles at potential scan rate of 50 mV s^?1, which makes it promising candidate for energy storage. An asymmetric system was prepared using nickel foams modified with NiCo LDH/NiCo₂S₄/g-C₃N₄ and g-C₃N₄ as positive and negative electrodes, respectively. The specific capacitance of 246.0 F g^?1 was obtained at 1 A g^?1 in 6 M KOH solution and system maintained 90.8% cyclic stability after 5000 cycles at potential scan rate of 50 mV s^?1. The maximum energy density and power density of the system were calculated as 82.0 Wh kg^?1 and 12,000 W kg^?1, respectively, which demonstrate its capability for energy storage.     

Boosting the capacitance of NiCo2O4 hierarchical structures on nickel foam in supercapacitors

A facile method of directly growing NiCo₂O₄ hybrid hierarchical nanostructures on nickel foam is developed by a hydrothermal and post heat-treatment method without using any surfactant, stabilizer or organic binder. Due to the rich porous nanostructures, relative large specific surface area (177.71 m² g^?1) of the NiCo₂O₄ hybrid structure and efficient electrical contact with the conductive nickel substrate, the NiCo₂O₄NF hybrid electrode shows significantly enhanced specific capacitance (3105.1 F g^?1 at 1 A g^?1), outstanding rate properties (1621.3 F g^?1 at 20 A g^?1 and 1191.5 F g^?1 at 50 A g^?1) and high energy density (95.26 Wh kg^?1). This facile and effective design method opens up new possibilities for producing binder-free electrodes in high-performance electrochemical supercapacitors and miniaturized devices.     

Electrodeposited nickel nanocone/NiMoO4 nanocomposite designed as superior electrode materials for high performance supercapacitor

A nickel nanocone-modified NiMoO₄ hybrid (NiMoO₄/NNC) on Ni foam (NF) substrate is engineered to enhance the capacitance performance of NiMoO₄ via facile and convenient electrodeposition strategy, followed by hydrothermal method. The presence of nickel nanocone (NNC) increases the density of reaction active sites of NiMoO₄/NNC/NF, which can shorten the charge diffusion pathway and boost ionic/electronic conductivities. As expected, the NiMoO₄/NNC/NF, as a prospective electrode material, presents appreciable electrochemical properties. Remarkably, the NiMoO₄/NNC/NF electrode demonstrates a high specific capacitance of 2813 F g^?1 at 3 A g^?1 and manifests considerable cycling durability with a retention of 94% of the initial capacitance over consecutive 5000 cycles. Furthermore, a NiMoO₄/NNC/NF//AC/NF asymmetric supercapacitor displays a great electrochemical performance by delivering high energy density (43 Wh kg^?1) and power density (821 W kg^?1) as well as notable durableness (10% decay after 5000 cycles). The presented results suggest that NiMoO₄/NNC/NF can be considered as a binder-free electrode for highly stable supercapacitors.     

Urchin and sheaf-like NiCo2O4 nanostructures: Synthesis and electrochemical energy storage application

Spinel NiCo₂O₄ in different morphologies is of current interest in the design and development of electrochemical supercapacitors. In this work, we synthesized two different morphologies of NiCo₂O₄ by facile hydrothermal method employing CTAB as a soft template and urea as hydrolysis controlling agent. This study has been undertaken to determine the effect of synthesis temperature on the morphology and pseudocapacitance behavior of the NiCo₂O₄. We find that the temperature variation in the synthesis procedure has a strong effect on the morphology of NiCo₂O₄, producing urchin-like morphology at 120 °C (NiCoO-120-cal) and sheaf-like morphology at 200 °C (NiCoO-200-cal) with hierarchical porous textures. The effect of morphology on the electrochemical pseudocapacitance behavior was studied by CV, CP and EIS techniques. Both NiCo₂O₄ samples show higher electrochemical performance than the parent NiO and Co₃O₄ synthesized under similar conditions. The maximum specific capacitance values obtained for NiCoO-120-cal and NiCoO-200-cal are 636 and 504 F g⁻¹ respectively, at a current density of 0.5 A g⁻¹. The capacitance retention of NiCoO-120-cal and NiCoO-200-cal samples, respectively, are 76% and 69% after 1000 charge–discharge cycles at a current density of 1 A g⁻¹.     

Chicken nuggets-like core/shell nanosheet arrays as high performance flexible all-solid-state supercapacitor cathode and buckwheat shell as anode

The energy density of a flexible all-solid-state supercapacitor (ASC) requires new electrode material with special structure and morphology as a prerequisite for its secured improvement. In this paper, a new morphological exploration of chicken nuggets-like core/shell NiCo₂O₄/MnO₂ (NCM) nanosheet arrays on Ni foam was employed. The application of this special morphology aims to greatly improve the electrochemical performance of the cathode electrode. Additionally, Buckwheat Biochar (BBC) is utilized as the anode while the PVA/KOH thin film is prepared as the separator. The chicken nuggets-like core/shell NCM nanosheet arrays were obtained by a two-step hydrothermal method. A series of characterization methods were carried out to further support the core/shell's well-designed structure and precise composition. The tests exhibited excellent specific capacitance of 593.3 F g^?1 at 5 mA cm^?2 and outstanding cycling stability with a retention of 90% after 10000 cycles. Furthermore, the assembled NCM//BBC ASC device indicated a high specific capacitance (239 F g^?1 at the current density of 5 mA cm^?2), this is in due part of the unique architecture of NCM nanosheet arrays and interconnected special porous structure of the BBC and the thin film PVA/KOH. Hence, the assembled ASC device exhibited high energy density (an energy density of 58 Wh·kg^?1 at 3263 W kg^?1) and remarkable cycling stability.     

Flexible all-solid-state asymmetric supercapacitor based on three-dimensional MoS2/Ketjen black nanoflower arrays

High electrochemical properties of negative electrode materials are highly desirable for flexible asymmetric supercapacitors (ASCs). Although benefiting from the unique structure and broad operation potential, molybdenum disulfide (MoS₂) has caused concern as a negative electrode material because its low electrochemical stability and poor conductivity hinder the exploitation of its application in flexible ASCs. Here we investigated a facile two-step hydrothermal approach to fabricate MoS₂/Ketjen black (KB) composites on flexible carbon cloth. Following the construction of flower-like MoS₂ on carbon cloth, KB nanospheres were embedded in MoS₂ via a secondary hydrothermal route. The as-prepared MoS₂/KB electrode presents a high capacitance of 429 F g⁻¹ at a current specific of 1 A g¹. In addition, the hybrid ASC device of NiCo₂O₄//MoS₂/KB was built, which delivers a high energy density of 25.7 Wh kg⁻¹ and power density of 16 kW kg⁻¹. These results are ascribed to the favorable structure of MoS₂ and inherently superior conductivity of KB, which improves wettability, structural stability and electronic conductivity. In brief, the proposed all-solid-state ASC device offers potential application in future portable electronics and flexible energy storage devices.     

Dual carbon source method to fabricate hierarchical porous carbon with three-dimensional interconnected network structure toward advanced energy storage device

Selective fabrication of carbon materials with developed specific surface area and hierarchical porous structure is essential for high-performance carbon-based supercapacitors. Direct carbonization of organic acid salts represents a strategy that can produce porous carbon with high specific surface area, but it is still hindered by low carbon yield, impeding its large-scale application. Herein, a biomass-derived hierarchical porous carbon with large specific surface area is prepared via a facile one-pot calcination method. The optimal SCPC-4 sample presents three-dimensional interconnected network structure and plentiful heteroatom content. Hence, it delivers a large specific capacitance of 321 F g^?1 at a current density of 1 A g^?1, and negligible capacitance loss after 10,000 cycles at 10 A g^?1. In addition, the assembled SCPC-4 based symmetric supercapacitor exhibits an energy density of 21.2 Wh kg^?1 at a power density of 900 W kg^?1. This cost-effective binary biomass carbon source route provides a great possibility for the mass production of high-yield porous carbon materials.     

Facile preparation of SnS2 nanoflowers and nanoplates for the application of high-performance hybrid supercapacitors

In this work, the SnS₂ nanoflowers (SnS₂ NFs) were solvothermally prepared in the solvent of ethanol, while SnS₂ nanoplates (SnS₂ NPs) were obtained through the identical conditions except for the solvent of water. The flowers were assembled with numerous nanosheets with very thin thickness, and the NPs exhibited hexagonal shape. When used as the battery-type electrode material for supercapacitors, the SnS₂ NFs delivered a specific capacity of as high as 264.4 C g^?1 at 1 A g^?1, which was higher than the 201.6 C g^?1 of SnS₂ NPs. Furthermore, a hybrid supercapacitor (HSC) was assembled with the SnS₂ as positive electrode and activated carbon (AC) as negative electrode, respectively. The SnS₂ NFs//AC HSC exhibited a high energy density of 28.1 Wh kg^?1 at 904.3 W kg^?1, which was higher than the 24.2 Wh kg^?1 at 844.3 W kg^?1 of SnS₂ NPs//AC HSC. Especially, when the power density was enhanced to the highest value of 8666.8 W kg^?1, the NFs-based device could still hold 20.4 Wh kg^?1. In addition, both HSC devices showed an excellent cycling stability after 5000 cycles at 5 A g^?1. The present method is simple and can be extended to the preparation of other transition metal sulfides (TMSs)-based electrode materials with brilliant electrochemical performance for supercapacitors.     

Simple synthesis of honeysuckle-like CuCo2O4/CuO composites as a battery type electrode material for high-performance hybrid supercapacitors

In this paper, porous CuCo₂O₄/CuO composites with novel honeysuckle-like shape (CuCo₂O₄/CuO HCs) have been prepared for the first time by a simple hydrothermal method and followed with an additional annealing process in air. The unique CuCo₂O₄/CuO HCs consisted of dense and slender petals with length of 1.3–1.5 μm and width of about 50 nm, and possessed a specific surface area of 36.09 m² g^?1 with main pore size distribution at 10.63 nm. When used as the electrode materials for supercapacitors, the CuCo₂O₄/CuO HCs exhibited excellent electrochemical performances with a high specific capacity of 350.69 C g^?1 at 1 A g^?1, a rate capability of 78.6% at 10 A g^?1, and 96.2% capacity retention after 5000 cycles at a current density of 5 A g^?1. In addition, a hybrid supercapacitor (CuCo₂O₄/CuO HCs//AC HSC) was assembled using the CuCo₂O₄/CuO HCs as positive electrode and activated carbon (AC) as negative electrode. The HSC device delivered a specific capacity of 187.85 C g^?1 at 1 A g^?1 and a superior cycling stability with 104.7% capacity retention after 5000 cycles at 5 A g^?1, and possessed a high energy density of 41.76 W h kg^?1 at a power density of 800.27 W kg^?1. These outstanding electrochemical performances manifested the great potential of CuCo₂O₄/CuO HCs as a promising battery-type electrode material for the next-generation advanced supercapacitors with high-performance.     

Rational design of hierarchical core-shell structured CoMoO4@CoS composites on reduced graphene oxide for supercapacitors with enhanced electrochemical performance

Engineering multicomponent active materials as an advanced electrode with the rational designed core-shell structure is an effective way to enhance the electrochemical performances for supercapacitors. Herein, three-dimensional self-supported hierarchical CoMoO₄@CoS core-shell heterostructures supported on reduced graphene oxide/Ni foam have been rationally designed and prepared via a facile approach. The unique structure and the synergistic effects between two different materials, as well as excellent electronic conductivity of the reduced graphene oxide, contribute to the increased electrochemically active site and enhanced capacitance. The core-shell CoMoO₄@CoS composite displays the superior specific capacitance of 3380.3 F g⁻¹ (1 A g⁻¹) in the three-electrode system and 81.1% retention of the initial capacitance even after 6000 cycles. Moreover, an asymmetric device was successfully prepared using CoMoO₄@CoS and activated carbon as positive/negative electrodes. It is worth mentioning that the device delivered the high energy density of 59.2 W h kg⁻¹ at the power density of 799.8 W kg⁻¹ and the excellent cycle performance (about 91.5% capacitance retention over 6000 cycles). These results indicate that the core-shell CoMoO₄@CoS composites offers the novelty strategy for preparation of electrodes for energy conversion and storage devices.     

Fabrication of core-shell NiMoO4@MoS2 nanorods for high-performance asymmetric hybrid supercapacitors

In this work, core-shell NiMoO₄@MoS₂ nanorods were successfully fabricated via a facile two-step hydrothermal method. By inheriting the merits of high electrical conductivity from MoS₂ nanosheets and high pseudocapacitive activity from NiMoO₄ nanorods, the hierarchical NiMoO₄@MoS₂ nanocomposite was endowed with improved electrical conductivity, enlarged specific surface area and enriched porosity, consequently enabling fast ion/electron transport and rapid Faradaic reactivity. Benefited from the synergism of NiMoO₄ and MoS₂, the NiMoO₄@MoS₂ electrode was superior to the NiMoO₄ and MoS₂ electrode, achieving specific capacitance of 2246.7 F g⁻¹, as well as showing good rate performance and improved cyclic stability (88.4% capacitance retention after 5000 cycles). The asymmetric supercapacitor device composed of the NiMoO₄@MoS₂ nanorods and hierarchical porous carbon exhibited a high energy density of 47.5 Wh kg⁻¹ at a power density of 0.44 kW kg⁻¹. The device also showed superior long-term cycling stability, retaining 80.2% of initial capacitance after 10 000 cycles. This work provides a simple strategy for scalable synthesis of integrated nanostructures, which holds great promise for the development of advanced supercapacitors.     

Electrospun NiMn2O4 and NiCo2O4 spinel oxides supported on carbon nanofibers as electrocatalysts for the oxygen evolution reaction in an anion exchange membrane-based electrolysis cell

Spinel oxide electrocatalysts supported on carbon nanofibers (CNFs), denoted as and NiMn₂O₄/CNF and NiCo₂O₄/CNF, are investigated for the oxygen evolution reaction (OER) in alkaline electrolyte. NiCo₂O₄/CNF and NiMn₂O₄/CNF are prepared according to an optimized electrospinning method using polyacrylonitrile (PAN) as carbon nanofibers precursor. After the thermal treatment at 900 °C for 1 h in the presence of helium and the subsequent one at 350 °C for 1 h in air, nanosized metal oxides with a spinel structure supported on carbon nanofibers are obtained. The physico-chemical investigation shows relevant difference in the crystallite size (9 nm for the NiCo₂O₄/CNF and 20 nm for the NiMn₂O₄/CNF) and a more homogeneous distribution for NiMn₂O₄ supported on carbon nanofibers. These characteristics derive from the different catalytic effects of Co and Mn during the thermal treatment as demonstrated by thermal analysis. The OER activity of NiCo₂O₄/CNF and NiMn₂O₄/CNF is studied in a single cell based on a zero gap anion-exchange membrane-electrode assembly (MEA). The NiMn₂O₄/CNF shows a better mass activity than NiCo₂O₄/CNF at 50 °C (116 A g⁻¹ @ 1.5 V and 362 A g⁻¹ @ 1.8 V vs. 39 A g⁻¹ @ 1.5 V and 253 A g⁻¹ @ 1.8 V) but lower current density at specific potentials. This is the consequence of a lower concentration of the active phase on the support resulting from the need to mitigate the particle growth in NiMn₂O₄/CNF.     

Synthesis of Fe3O4 nanocubes anchored in MgCo2O4 nanoneedle arrays for flexible all-solid-state asymmetric supercapacitor

The design of novel heterostructure with multifunctional characteristics is of great technical significance for the development of new energy storage devices. However, the lower conductivity of metal oxides and the accumulation caused by irreversible phase transition after multiple cycles are the main reasons for the low specific capacitance and cycle life. Herein, we synthesized bimetallic oxide MgCo₂O₄ nanoneedles with a spinel structure, and firmly anchored Fe₃O₄ nanocubes on MgCo₂O₄ nanoneedles by ion-exchange strategy. Thanks to the constructed heterostructure of nanoneedles/nanocubes, the introduction of Fe₃O₄ effectively improves the electron transport path in MgCo₂O₄ during repeated charging and discharging, and increases the effective activation sites involved in electron transfer. As a result, a higher specific capacitance of 1648 F g^?1 at 1 A g^?1 and an ultra-long cycle life of 78.6% capacitance retention after 6000 continuous charge/discharge cycles are obtained. A flexible all-solid-state asymmetric supercapcitor assembled with MgCo₂O₄-Fe₃O₄ as positive electrode and AC as negative electrode can deliver an ultra-high energy density of 78 Wh kg^?1 and maximum power density of 1.2 kW kg^?1, as well as extraordinary capacitive retention of 75.2% after 10,000 cycles. These excellent properties reveal the potential and application value of MgCo₂O₄-Fe₃O₄ in the development of high-performance supercapacitors.     

Multifunctional Co3O4/Ti3C2Tx MXene nanocomposites for integrated all solid-state asymmetric supercapacitors and energy-saving electrochemical systems of H2 production by urea and alcohols electrolysis

Co₃O₄/Ti₃C₂T_x MXene nanocomposites have been fabricated by vacuum filtration and hydrothermal-annealing methods, and their electrochemical performance were investigated for energy storage and conversion, systematically. As electrode materials, Co₃O₄/Ti₃C₂T_x MXene nanocomposites in 6 M KOH solution demonstrated the specific capacitance of 240.1 F g^?1 at 0.1 A g^?1 and the long-term cycle stability. The solid-state asymmetric supercapacitors exhibited an operating potential window of 1.4 V, a specific capacitance of 97.9 F g^?1at 0.25 A g^?1, an energy density of 95.9 Wh kg^?1 at a power density of 630.4 W kg^?1, and excellent long-term durability. Furthermore, the connected solid-state asymmetric supercapacitors inseries and parallels presented the promising practical applications. Besides, Co₃O₄/Ti₃C₂T_x nanocomposites displayed outstanding catalytic behaviors for energy-saving H₂ generation by urea and alcohols electrolysis. The electrolyzer in KOH + CH₃CH₂OH electrolyte required only 1.33 V potential to deliver the current density of 0.5 A g^?1. Especially, the elctrochemical system of H₂ production by The electrolyzer and the powered solid-state asymmetric supercapacitors based on Co₃O₄/Ti₃C₂T_x nanocomposites was constructed, demonstrating outstanding properties of H₂ production. Therefore, this study not only shows enormous potential of Co₃O₄/Ti₃C₂T_x nanocomposites as a portable power supply but also indicates its great opportunities in energy-saving H₂ production in practical applications.     

N,P, S co-doped biomass-derived hierarchical porous carbon through simple phosphoric acid-assisted activation for high-performance electrochemical energy storage

Porous carbon materials are the most widely used electrode materials in Electric Double Layer Supercapacitor (EDLS). Optimize specific surface area, improving hierarchical pores structure, and doping heteroatoms are all important methods to improve the capacitance performance of electrodes. Herein, we synthesize walnut shell-derived hierarchical porous carbon (WSPC) with cost-effective and well-developed pore for electrochemical energy storage via simple phosphoric acid-assisted activation method. The final porous carbon products have perfect microporous structure, abundant heteroatom functional groups (the atomic content ratio of nitrogen, phosphorus and sulfur reaches 10.3%), and high specific surface area and pore volume (up to 2583 m² g^?1 and 1.236 cm³ g^?1, respectively). In the three-system, the electrode shows an optimal specific capacitance of up to 332 F g^?1 and excellent rate performance. In the symmetric system, the symmetric device WSPC//WSPC shows a maximum gravimetric specific energy of ~14.08 Wh kg^?1. And the device still has a specific energy of 9.75 Wh kg^?1 even under the high gravimetric specific power of 7 kW kg^?1. In addition, the device has excellent cycle stability and retains an initial specific capacitance of 90.2% after 8000 galvanostatic charge-discharge (GCD) cycle. In summary, these outstanding results suggest the biomass derived porous carbon possessing the potential and will show great commercial value for the fabrication of high performance supercapacitors.     

Flexible supercapacitor based on three‐dimensional cellulose/graphite/polyaniline composite

Fast charge‐discharge rate and high areal capacitance, along with high mechanically stability, are the pre‐requisites for flexible supercapacitors to power flexible electronic devices. In this paper, we have used three‐dimensional polyacrylonitrile graphite foam as flexible current collector for electro‐deposition of polyaniline (PANI) nanowires. The graphite foam with PANI was then used to fabricate symmetric supercapacitor. The fabricated supercapacitor in the three‐electrode system shows a high specific capacitance (C_sp) of 357 F.g^?1 and areal capacitance (C_areal) of 7142 mF.cm^?2 in 1 M H₂SO₄ at current density of 80 mA.cm^?2, while using two‐electrode system, it shows C_sp of 256 F.g^?1 and C_areal of 5120 mF.cm^?2 in 1 M H₂SO₄ at current density of 100 mA.cm^?2. The current density of 100 mA.cm^?2 is up to 10 folds higher than reported current densities of many PANI‐based supercapacitors. The high capacitance can be attributed to the spongy network of PANI‐NWs on three‐dimensional graphite surface which provides an easy path for electrolyte ions in active electrode materials. The developed supercapacitor shows specific energy of 64.8 Whkg^?1 and a specific power of 6.1 kWkg^?1 with a marginally decrease of 1.6% in C_sp after 1000^th cycles, along with coulombic efficiency retention of 87% in polyvinyl alcohol/H₂SO₄ gel electrolyte. This flexible supercapacitor exhibits great potential for energy storage application.     

Construction of NiCo2S4/Ni3S2 nanoarrays on Ni foam substrate as an enhanced electrode for hydrogen evolution reaction and supercapacitors

Developing a multifunctional and sustainable electrode material for hydrogen evolution reaction and supercapacitors is a highly feasible avenue for producing the high energy density and renewable energies. In our study, nanostructured NiCo₂S₄/Ni₃S₂/NF nanoarrays are rational developed in experiments via a simple hydrothermal reaction. Ascribed to the 3D nanostructured NiCo₂S₄/Ni₃S₂ with numerous exposure active sites and large contact areas for the electrolyte, the binder-free feature of NiCo₂S₄/Ni₃S₂/NF facilitates a low charge transfer resistance, as well as the synergetic effect of NiCo₂S₄ and Ni₃S₂. The obtained electrocatalyst showed ultrahigh electrocatalytic activity with an overpotential of 111 mV at 10 mA cm⁻² and a Tafel slope of 57 mV dec⁻¹. In addition, the electrode showed an area specific capacity of 6.13 F cm⁻² at 10 mA cm⁻² and superior rate capability (2.72 F cm⁻² at 80 mA cm⁻²), accompanied by excellent cycling stability. This results presented in our work can provide an effective strategy for rational design of other hybrid materials with excellent electrochemical performance in the application of electrocatalysis and supercapacitors.