In-situ synthesis of ternary layered Y3Si2C2 ceramic on silicon carbide fiber for enhanced electromagnetic wave absorption

A novel ternary layered ceramic of Y₃Si₂C₂ was successfully in-situ synthesized on the surface of home-made third-generation KD-SA SiC fiber for the first time by molten salt method aimed at improving the electromagnetic wave (EMW) absorption. After in-situ synthesis of Y₃Si₂C₂ ceramic layer on SiC fiber (SiC_f/Y₃Si₂C₂), significantly improved EMW absorption performance was obtained. The minimum reflection loss (RL_min) of ?16.97 dB was reached in SiC_f/Y₃Si₂C₂ composites at the thickness of only 2.19 mm, and the effective absorption bandwidth (EAB) was up to 5.44 GHz (12.56–18 GHz) at a thin thickness of 2.64 mm. The improvement in EMW absorption of SiC_f/Y₃Si₂C₂ is mainly attributed to enhanced dielectric loss and conduction loss resulting from increased heterogeneous interfaces and multiple reflections and scattering originating from net structure. The SiC_f/Y₃Si₂C₂ could be a promising EMW absorber for application in high-performance EMW absorbing materials.     

Enhanced electromagnetic wave absorption performance of SiCN(Fe) fibers by in-situ generated Fe3Si and CNTs

The SiCN(Fe) fibers with excellent one-dimensional microstructure and electromagnetic wave (EMW) absorption performance were synthesized by combining polymer-derived ceramics (PDCs) method and electrospinning. The in-situ generation of Fe₃Si and CNTs by adding ferric acetylacetonate (FA) into the raw materials effectively improved the dielectric properties, magnetic properties and the impedance matching performance of the SiCN(Fe) fibers. The EMW absorption performance of SiCN(Fe) fibers were mainly based on dipole polarization loss, interface polarization loss and eddy current loss. The RL_min value of SiCN(Fe) fibers reached ?47.64 dB at 1.38 mm and the effective absorption band (EAB, RL ≤ ?10 dB) reached 4.28 GHz (13.72–18 GHz, 1.35 mm).     

Magnetic sputtering of FeNi/C bilayer film on SiC fibers for effective microwave absorption in the low-frequency region

It is a great challenge in promoting a microwave absorber with excellent absorbing properties in the low-frequency region. Herein, SiC fibers (SiC_f) coated by a bilayer of FeNi/C (SiC_f/FeNi/C) are fabricated via a two-step magnetron sputtering method. Owing to the improved dielectric loss, magnetic loss, and impedance matching, the reflection loss of SiC_f/FeNi/C is remarkably enhanced. Accordingly, the minimum reflection loss of SiC_f/FeNi/C reaches ?26.18 dB at a low-frequency region of 3.44 GHz. Besides, the mechanic strength of SiC_f/FeNi/C maintains at 2.32 GPa as compared to as-received SiC_f. Thus, SiC_f/FeNi/C is expected to be an ideal structure material to meet low-frequency microwave absorption requests.     

Enhancement of the microwave absorption properties of PyC-SiCf/SiC composites by electrophoretic deposition of SiC nanowires on SiC fibers

The employment of coating technique on the silicon carbide fibers plays a pivotal role in preparing SiC fiber-reinforced SiC composites (SiC_f/SiC) toward electromagnetic wave absorption applications. In this work, SiC nanowires (SiCNWs) are successfully deposited onto the pyrolytic carbon (PyC) coated SiC fibers by an electrophoretic deposition method, and subsequently densified by chemical vapor infiltration to obtain SiCNWs/PyC-SiC_f/SiC composites. The results reveal that the introduction of SiCNWs could markedly enhance the microwave absorption properties of PyC-SiC_f/SiC composites. Owing to the increasing of SiCNWs loading, the minimum reflection loss of composites raises up to −58.5 dB in the SiCNWs/PyC-SiC_f/SiC composites with an effective absorption bandwidth (reflection loss ≤ −10 dB) of 6.13 GHz. The remarkable enhancement of electromagnetic wave absorption performances is mainly attributed to the improved dielectric loss ability, impedance matching and multiple reflections. This work provides a novel strategy in preparing SiC_f/SiC composites with excellent electromagnetic wave absorption properties.     

Flexible and stretchable Ti3SiC2-based composite films for efficient electromagnetic wave absorption

Ti₃SiC₂, as ternary layered ceramic with good electrical and thermal conductivity, has great application potential in the field of absorbing materials. Absorbing materials are also increasingly required to be lightweight, ultrathin, and flexible. Herein, Ti₃SiC₂/poly (TEP, DOP and PVB) composite film was biomimetically designed and fabricated by type casting process. As-fabricated composite film with 38% content of Ti₃SiC₂ was only 1.62 mm in thickness but exhibited excellent absorbing performance. The maximum reflection loss value of Ti₃SiC₂-based films was as high as −38.41dB and absorption bandwidth below −10 dB was 2.480 GHz. Polymer matrix wrapped around Ti₃SiC₂ not only enhanced the flexibility of the film, but also regulated its impedance matching and complex dielectric constant compared with pure Ti₃SiC₂. Superior wave absorption and flexibility imply excellent potential of this Ti₃SiC₂-based composite film for eliminating electromagnetic interference.     

In-situ growth of bamboo-shaped carbon nanotubes and helical carbon nanofibers on Ti3C2Tx MXene at ultra-low temperature for enhanced electromagnetic wave absorption properties

The potential of two-dimensional layered MXenes in electromagnetic wave (EMW) absorption needs further development. Herein, we carried out the in situ growth of carbon nanotubes (CNTs) on the surface of Ti₃C₂T_x MXene at ultra-low temperature via chemical vapor deposition. The obtained CNTs exhibited a bamboo-like structure and were accompanied by helical carbon nanofibers. The ultra-low temperature solved the problem that the high temperature required in the traditional CNT growth process would destroy the structural integrity of MXene. The lush CNT forest cross-linked the MXene layers, transforming the two-dimensional layered structure into a three-dimensional conductive network, providing abundant conductive channels for carriers, optimizing the impedance matching of the CNT/MXene hybrid, and resulting in a significant dielectric loss. The as-prepared CNT/MXene hybrid exhibited a minimal reflection loss of ?52.56 dB (99.9994% EMW absorption) in the X-band. This work proposes a new idea to enhance the EMW absorption properties of Ti₃C₂T_x MXene and fabricate high-performance MXene-based EMW absorbers.     

Ultralight and efficient microwave absorption of SiC/SiO2 ceramic aerogels derived from biomass

Rational multicomponent regulation and microstructure design have proven to be effective strategies for achieving high performance electromagnetic wave (EMW) absorbers. Herein, the ultralight hierarchically porous SiC/SiO₂ aerogels (HPSA) were successfully synthesized by an ingenious one-step method to achieve carbonization and carbothermal reduction. The composition of the HPSA and the quantity of SiC/SiO₂ fibers grown by in situ reaction can be controlled by adjusting the amount of silicon source introduced. The results indicate that the composition of HPSA and the quantity of fibers have a significant effect on the EMW absorption properties. When the introduced silicon source concentration was 0.7 mol/L, the HPSA exhibited excellent EMW absorption performance, with a minimum reflection loss (RL_min) of -55.01 dB at 6.00 GHz and a maximum effective absorption bandwidth (EAB_max) of 6.16 GHz. The highly interconnected porous SiC/SiO₂ skeleton structure significantly contributes to the multiple reflection-absorption effect of EMW and provides available pathways for electron conduction losses. The in situ reaction generates SiC/SiO₂ fibers with a large number of stacking faults and heterojunctions, which further promote the dissipation of EMW. In addition, the maximum radar cross section of HPSA under far-field conditions is reduced to 20.21 dB m² compared to the PEC conductive layer, which implies a much lower probability of detection by radar. In brief, this work provides a reference for the use of highly efficient EMW absorbers and electromagnetic stealth materials.     

Effect of SiC interphase on the mechanical,high-temperature dielectric and high-temperature microwave absorption properties of the SiCf/SiC/Mu composites

In this study, SiC interphase was prepared via a precursor infiltration-pyrolysis process, and effects of dipping concentrations on the mechanical, high-temperature dielectric and microwave absorption properties of the SiC_f/SiC/Mu composites had been investigated. Results indicated that different dipping concentrations influenced ultimate interfacial morphology. The SiC interphase prepared with 5 wt% PCS/xylene solution was smooth and homogeneous, and no bridging between the fiber monofilament could be observed. At the same time, SiC interphase prepared with 5 wt% PCS/xylene solution had significantly improved mechanical properties of the composite. In particular, the flexural strength of the composite prepared with 5 wt% PCS/xylene solution reached 281 MPa. Both ε′ and ε′′ of the SiC_f/SiC/Mu composites were enhanced after preparing SiC interphase at room temperature. The SiC_f/SiC/Mu composite prepared with 5 wt% PCS/xylene solution showed the maximum dielectric loss value of 0.38 at 10 GHz. Under the dual action of polarization mechanism and conductance loss, both ε′ and ε′′ of the SiC_f/SiC/Mu composites enhanced as the temperature increased. At 700 °C, the corresponding bandwidth (RL ≤ ?5 dB) of SiC_f/SiC/Mu composites prepared with 5 wt% PCS/xylene solution can reach 3.3 GHz at 2.6 mm. The SiC_f/SiC/Mu composite with SiC interphase prepared with 5 wt% PCS/xylene solution is expected to be an excellent structural-functional material.     

Sandwich-like preparation of Ti3C2Tx@CoFe@TiO2 nanocomposites for high-performance electromagnetic wave absorption

Electromagnetic wave (EMW) absorbing materials have been widely applied in the fields of military and engineering areas. It is of great significance to develop high-performance EMW absorbing materials. This work assembled the sandwich-like Ti₃C₂T_x based nanocomposites by the microwave-assisted annealing of CoFe-MOF@Ti₃C₂T_x (CFMF@Ti₃C₂T_x) precursors at different temperatures. Results show that, as the heat treatment temperature is 450 °C, the sandwich-like Ti₃C₂T_x@CoFe@TiO₂ nanocomposites present better EMW absorption properties. The minimum reflection loss (RL) value was ?62.9 dB at 17.95 GHz with a thin thickness of 1.2 mm. Moreover, the effective absorption bandwidth (EAB) value was 5.02 GHz (12.74–17.76 GHz) with a thickness of 1.4 mm. The application of microwave-assisted annealing contributed to the formation of CoFe nanoparticles and TiO₂ nanoparticles because of the ultra-fast heating rate. The introduction of the nanoparticles enhanced the multiple polarization, optimized the impedance matching and introduced magnetic loss, leading to the improvement of EMW absorption. When the annealing temperature further increased to 550 °C, the EMW absorbing performance was weakened, which was mainly correlated with the decrement of the interface area due to the increase of the TiO₂ nanoparticle size and CoFe nanoparticle size. Thus, the loss effect of the multiple interface polarization weakens in the EMW absorption. In addition, the high permittivity of Ti₃C₂T_x disappears, which deteriorated the impedance matching and attenuation ability of EMW. Ultimately, sandwich-like Ti₃C₂T_x@CoFe@TiO₂ nanocomposite with satisfactory EMW absorbing properties is established, promising for various EMW absorbing applications.     

Preparation of SiCf/Si–O–C composites by impregnation pyrolysis of polysiloxane and its electromagnetic wave absorption properties

High-temperature structural electromagnetic wave (EMW) absorption materials are increasing in demand because they can simultaneously possess the functions of mechanical load-bearing, heatproof, and EMW absorption. Herein, SiC_f/Si–O–C composites were prepared by precursor impregnation pyrolysis using continuous SiC fibers needled felt as reinforcement and polysiloxane as a precursor, respectively. The phase composition, microstructure, complex permittivity, and EMW absorption properties of SiC_f/Si–O–C composites after annealing at various temperatures were investigated. The annealing at 1400–1500°C affects positively the EMW absorption performance of the composites, because the β-SiC microcrystals and SiC nanowires were generated by the activation of carbothermal reduction reaction in the composites, and the aspect ratio of SiC nanowires increased with the rise of temperature. The composites exhibit optimal EMW absorption performance, with the effective absorption bandwidth covering the entire X-band and the minimum reflection loss (RL_min) of −32.8 dB at 4.0 mm when the annealing temperature is raised to 1500°C. This is because that the impedance matching is improved as the rising of ε′ and decreasing of ε″ due to the conversion of free carbon in the composite into SiC nanowires.     

Morphology-controlled preparation and tunable electromagnetic wave absorption performance of manganese dioxide nanostructures

The development of electromagnetic wave (EMW) absorption materials with lightweight, wide absorption bandwidth, thin thickness, and strong EMW absorption performance has become a hotspot. Herein, the morphology-controlled preparation of α-manganese dioxide (α-MnO₂) was successfully obtained via a facile hydrothermal method, and the EMW absorption performance of α-MnO₂ was investigated in detail. The results indicated the as-obtained Mn-1.0-120 possessed the best EMW absorption performance with minimum reflection loss of −53.43 dB at about 5.2 GHz with a thickness of 4.1 mm originated from the synergistic effects of multiply scattering, dielectric loss, and magnetic loss. This contribution demonstrates that the MnO₂ has promising candidates with a tunable EMW absorption performance for applications in the electromagnetic field in the future.     

Electromagnetic wave absorption and mechanical properties of silicon carbide fibers reinforced silicon nitride matrix composites

It is difficult for ceramic matrix composites to combine good electromagnetic wave (EMW) absorption properties (reflection coefficient, RC less than -7 dB in X band) and good mechanical properties (flexural strength more than 300 MPa and fracture toughness more than 10 M P·m^1/2). To solve this problem, two kinds of wave-absorbing SiC fibers reinforced Si₃N₄ matrix composites (SiC_f/Si₃N₄) were designed and fabricated via chemical vapor infiltration technique. Effects of conductivity on EM wave absorbing properties and fiber/matrix bonding strength on mechanical properties were studied. The SiC_f/Si₃N₄ composite, having a relatively low conductivity (its conduction loss is about 33% of the total dielectric loss) has good EMW absorption properties, i.e. a relative complex permittivity of about 9.2-j6.4 at 10 GHz and an RC lower than ?7.2 dB in the whole X band. Its low relative complex permittivity matches impedances between composites and air better, and its strong polarization relaxation loss ability help it to absorb more EM wave energy. Moreover, with a suitably strong fiber/matrix bonding strength, the composite can transfer load more effectively from matrix to fibers, resulting in a higher flexural strength (380 MPa) and fracture toughness (12.9 MPa?m^1/2).     

Enhanced high-temperature dielectric and microwave absorption properties of SiC fiber-reinforced oxide matrix composites

Because of outstanding performances of the SiC fiber-reinforced ceramic matrix composites in aircraft/aerospace systems, two silicon carbide fiber-reinforced oxide matrices (SiC_f/oxides) composites have been prepared by a precursor infiltration and sintering method. Results indicate that the flexural strength of the SiC_f/Al₂O₃–SiO₂ composite reaches 159 MPa, whereas that of the SiC_f/Al₂O₃ composite is only 50 MPa. The high-temperature microwave absorption properties of the composite are significantly enhanced due to choosing Al₂O₃ and SiO₂ as the hybrid matrices. Particularly, the minimum reflection loss (RL) value of the SiC_f/Al₂O₃–SiO₂ composite reaches −37 dB in the temperature of 200 °C at 8.6 GHz, and the effective absorption bandwidth (RL ≤ −5 dB) is 4.2 GHz (8.2–12.4 GHz) below 400 °C. The superior microwave absorption properties at high temperatures indicate that the SiC_f/Al₂O₃–SiO₂ composite has promising applications in civil and military areas. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47097.     

Ti3SiC2 interphase coating in SiCf/SiC composites: Effect of the coating fabrication atmosphere and temperature

The SiC fibers were coated with Ti₃SiC₂ interphase by dip-coating. The Ti₃SiC₂ coated fibers were heat-treated from 900 °C to 1100 °C in vacuum and argon atmospheres to comparatively analyze the effect of temperature and atmosphere on the microstructural evolution and mechanical strength of the fibers. The results show that the surface morphology of Ti₃SiC₂ coating is rough in vacuum and Ti₃SiC₂ is decomposed at 1100 °C. However, in argon atmosphere, the surface morphology is smooth and Ti₃SiC₂ is oxidized at 1000 °C and 1100 °C. At 1100 °C, Ti₃SiC₂ oxidized to form a thin layer of amorphous SiO₂ embedded with TiO₂ grains. Meanwhile, defects and pores appeared in the interphase scale. As a result, the fiber strength treated in the argon was lower than that treated in vacuum. The porous Ti₃SiC₂ interphase fabricated under vacuum was then employed to prepare the SiC_f/SiC mini composite by chemical vapor infiltration (CVI) combined with precursor infiltration pyrolysis (PIP), and can effectively improve the toughness of SiC_f/SiC mini composite. The propagating cracks can be deflected within the porous interphase layer, which promotes fiber pull-outs under the tensile strength.     

Impedance matching optimization of SiCf/Si3N4–SiOC composites for excellent microwave absorption properties

SiC fiber reinforced ceramic matrix composites (SiC_f-CMCs) are considered to be one of the most promising materials in the electromagnetic (EM) stealth of aero-engines, which is expected to achieve strong absorption and broad-band performance. Multiscale structural design was applied to SiC_f/Si₃N₄–SiOC composites by construction of micro/nanoscale heterogeneous interfaces and macro double-layer impedance matching structure. SiC_f/Si₃N₄–SiOC composites were fabricated by using SiC fibers with different conductivities and SiOC–Si₃N₄ matrices with gradient impedance structures to improve impedance matching effectively. Owing to its unique structure, SiC_f/Si₃N₄–SiOC composites (A3-composites) achieved excellent EM wave absorption performance with a minimum reflection coefficient (RC_min) of ?25.1 dB at 2.45 mm and an effective absorption bandwidth (EAB) of 4.0 GHz at 2.85 mm in X-band. Moreover, double-layer SiC_f/Si₃N₄–SiOC with an improved impedance matching structure obtained an RC_min of ?56.9 dB and an EAB of 4.2 GHz at 3.00 mm, which means it can absorb more than 90% of the EM waves in the whole X-band. The RC is less than ?8 dB at 2.6–2.8 mm from RT to 600 °C in the whole X-band, displaying excellent high-temperature absorption performance. The results provide a new design opinion for broad-band EM absorbing SiC_f-CMCs at high temperatures.     

Enhanced electromagnetic wave absorbing properties of Si-O-C ceramics with in-situ formed 1D nanostructures

The Si-O-C ceramics were prepared by polymer-derived ceramic method using polysiloxane/FeCl₃ as precursor with the FeCl₃ content of 1.0 wt%. The microstructure, dielectric properties, and electromagnetic wave (EMW) absorbing properties in X band of the Si-O-C ceramic were investigated. It was found that the pyrolysis temperature has a great influence on the amount of in-situ formed CNTs and the transformation from CNTs to 1D SiC nanostructures. With the temperature rising from 1000 to 1500°C, the SiC formed with various morphologies including SiC microspheres, needle-like SiC, and SiC nanowires which were transformed from CNTs. The EMW absorbing properties were dramatically improved when the pyrolysis temperature raised to 1500°C; the minimum reflection loss (RL) was −58.37 dB of sample with a thickness of 2.95 mm at 10.11 GHz, and the absorbing band (RL ≤−20 dB) of sample at a thickness of 3.0 mm covers 3.8 GHz (8.2-12.0 GHz), which means more than 99% of the EMW were absorbed. The enhancement of EMW absorbing properties of bulk Si-O-C ceramics was attributed to the interfacial polarization induced by in-situ heterogeneous nanostructures with complex interfaces.     

Dielectric response and electromagnetic wave absorption of novel macroporous short carbon fibers/mullite composites

For wider-band and stronger electromagnetic (EM) wave absorption, macroporous short carbon fibers/mullite matrix (C_f/Mu) composites were prepared via introducing short carbon fibers (0, 0.7, and 1.3 vol%) with length of 2-3 mm into macroporous mullite ceramic by gel-casting. The density of as-prepared C_f/Mu composites decreases from 2.93 g/cm³ to 2.74 g/cm³, while the porosity increases from 3.32% to 10.76% with the rise in carbon fibers content. The diameter of macropores in C_f/Mu composites is ranging from several microns to tens of microns. Complex permittivity and dielectric loss of the prepared composites in X-band (8.2-12.4 GHz) are significantly enhanced with increased carbon fibers content. The best EM wave absorption performance is obtained in the macroporous C_f/Mu composites containing only 0.7 vol% carbon fibers (C_f/Mu-0.7). The maximum absorption loss of C_f/Mu-0.7 is −38.3 dB at 12.08 GHz at the thickness of 2.1 mm, and effective absorption bandwidth below −10 dB (over 90% of EM wave absorption) covers the whole X band with the thickness of 2.35 mm. The results suggest that the C_f/Mu composites can be promising high-performance EM wave absorbing materials.     

Fabrication of TiC coated short carbon fiber reinforced Ti3SiC2 composites: Process,microstructure and mechanical properties

The C_f/Ti₃SiC₂ composites were fabricated through spark plasma sintering (SPS) and hot isostatic pressing (HIP), TiC coated C_f and Ti₃SiC₂ powder were used as starting materials. The improved fracture toughness (K_IC) and Vickers hardness (HV₁) of the TiC coated C_f/Ti₃SiC₂ composite fabricated by SPS were 7.59 MPa·m^1/2 and 7.28 GPa. On this foundation, taking the advantage of better sintering process of HIP, the highest K_IC and HV₁ achieved 8.32 MPa·m^1/2 and 9.24 GPa with fiber content of 10 vol%, which increased by 40% and 65% compared with that of monolithic Ti₃SiC₂. The reasonable control of reactive interface is the main factor for the improved mechanical properties of the composites, the TiC coating effectively protected the fiber structure from interfacial reaction compared with that of the non-coated C_f/Ti₃SiC₂. Meanwhile, the artificially designed and weakly bonded TiC coated C_f can fully exert the toughening mechanisms like fiber pull-out and debonding.     

Polyaniline-based networks combined with Fe3O4 hollow spheres and carbon balls for excellent electromagnetic wave absorption

Polyaniline (PANI)-based networks combined with Fe₃O₄ hollow spheres and carbon balls (FCP) for improved electromagnetic wave (EMW) absorption were investigated using an easy-to-industrialize solvothermal and physical method. Hollow structure Fe₃O₄ spheres with a lower density than that of the common solid sphere were prepared. As a thin and light magnetic material, Fe₃O₄ hollow spheres generate magnetic loss, carbon balls and PANI networks generate dielectric loss. The magnetic and conductive parts play appropriate roles in achieving complementarity in the EMW absorption. The relatively high specific surface area introduced by PANI networks promotes interfacial polarization and further supports dielectric loss. In conclusion, the above reasons provide multiple attenuation mechanisms. Samples FCP1 (?65.109 dB, at 12.800 GHz, 1.966 mm, from 5.6 to 18.0 GHz) and FCP2 (?61.033 dB, at 8.480 GHz, 3.328 mm, from 4.3 to 18.0 GHz) demonstrated a wide bandwidth, a small thickness, a minimum reflection loss (R_L), and a low loading ratio (25%) in paraffin-based composites. Specifically, their loading ration of 25% is much lower than the loading ratio of conventional materials (usually 50% and above). In addition, the bandwidth is excessively wide, above 12 GHz, possessing good absorption performance in continuous intervals with different thicknesses. Such excellent characteristics have rarely been reported in literature.     

Porous SiC–Si3N4 composite ceramics with excellent EMW absorption property prepared by gelcasting using DMAA

The porous SiC–Si₃N₄ composite ceramics with good EMW absorption properties were prepared by combination of gelcasting and carbothermal reduction. The pre-oxidation of Si₃N₄ powders significantly improved the rheological properties of slurries (0.06 Pa s at 103.92 s⁻¹) and also suppressed the generation of NH₃ and N₂ from Si₃N₄ hydrolysis and reaction between Si₃N₄ and initiator APS, thereby reducing the pore defects in green bodies and enhancing mechanical properties with a maximum value of 42.88 MPa. With the extension of oxidation time from 0 h to 10 h, the porosity and pore size of porous SiC–Si₃N₄ composite ceramics increased from approximately 41.86% and 1.0–1.5 μm to 46.33% and ~200 μm due to the production of CO, N₂ and gaseous SiO, while the sintering shrinkage decreased from 16.24% to 10.50%. With oxidation time of 2 h, the Si₂N₂O fibers formed in situ by the reaction of Si₃N₄ and amorphous SiO₂ effectively enhanced the mechanical properties, achieving the highest flexural strength of 129.37 MPa and fracture toughness of 4.25 MPa m^1/2. Compared with monolithic Si₃N₄ ceramics, the electrical conductivity, relative permittivity and dielectric loss were significantly improved by the in-situ introduced PyC from the pyrolysis of three-dimensional network DMAA-MBAM gel in green bodies and the SiC from the carbothermal reduction reaction between PyC and SiO₂ and Si₃N₄. The porous SiC–Si₃N₄ composite ceramics prepared by the unoxidized Si₃N₄ powders demonstrated the optimal EMW absorption properties with reflection loss of −22.35 dB at 8.37 GHz and 2 mm thickness, corresponding to the effective bandwidth of 8.20–9.29 GHz, displaying great application potential in EMW absorption fields.