Graft copolymers with hydrophilic and hydrophobic polyether side chains

Poly(ethylene glycol)methyl ether methacrylate (PEOMA) and oligo(propylene glycol)-4-nonylphenyl ether acrylate (OPOPhNA) were copolymerized by atom transfer radical polymerization (ATRP). Grafting through method was employed in the presence of CuBr/HMTETA or CuBr/PMDETA catalyst/ligand complex in anisole at 70 °C. It yielded a heterografted copolymers containing hydrophilic PEO and hydrophobic OPOPhNA side chains with polymerization degree DP = 68-315 in the presence of PMDETA and DP = 48-195 in the presence HMTETA. Moreover, higher reactivity of PEOMA than OPOPhNA (r_methacrylate > r_acrylate), which was observed during copolymerization, suggested the formation of copolymers with a spontaneous gradient composition starting from the grafted segment of P(PEOMA). The molecular weight distribution (MWD) was increased with DP in the range 1.2-1.6. The X-ray diffraction analysis (WAXS) indicated that larger number of PEO segments generated crystalline properties in the copolymers with amorphous OPOPhNA.     

Synthesis and self-association in aqueous media of poly(ethylene oxide)/poly(ethyl glycidyl carbamate) amphiphilic block copolymers

New temperature sensitive AB, ABA, and BAB amphiphilic block copolymers consisting of hydrophilic poly(ethylene oxide) and hydrophobic poly(ethyl glycidyl carbamate) blocks were synthesized by anionic polymerization followed by chemical modification reactions. The self-association of the block copolymers in aqueous media was studied by UV-vis spectroscopy and dynamic and static light scattering. The obtained block copolymers spontaneously form micelles in aqueous media. The critical micellization concentration varied from 0.5 to 4 g/L depending on the copolymer architecture and composition. The influence of the temperature upon the self-association of the block copolymers was investigated. The increase of temperature did not affect the value of the critical micellization concentration, but led to the formation of better defined micelles with narrow size distribution.     

High molecular arborescent polyoxyethylene with hydroxyl containing shell

Arborescent polyoxyethylene of high molar mass (2×10⁵ g/mol) and narrow molar mass distribution was synthesized in a three-stage process. In the first stage a triblock copolymer of ethylene oxide (central block, DP ca. 90) and 2,3-epoxypropanol-1 (short flanking blocks, DP ca. 5) was synthesized. The potassium alcoholate derived from this copolymer was used to initiate the polymerization of ethylene oxide and the subsequent addition of protected glycidol (1-etoxyethyl glycidyl ether). After deprotection the short polyglycidol blocks were used as branching units for the next generation. Repeated step by step process leads to the ‘pom-pom like’ branched polyoxyethylene macromolecules enriched with the reactive hydroxyl groups in the outer shell. The branched structure of the obtained polymers was evidenced by the size exclusion chromatography and NMR spectroscopy.     

Self-assembly of amphiphilic liquid crystal block copolymers containing a cholesteryl mesogen: Effects of block ratio and solvent

We report on the self-assembly, in water and in bulk, of amphiphilic liquid crystal block copolymers consisting of a cholesterol-based smectic LC polymer block (PAChol) and poly(ethylene glycol) (PEG) block. Two series of block copolymers, PEG₄₅-b-PAChol and PEG₁₁₄-b-PAChol (45 and 114 are the degree of polymerization of PEG blocks) with different hydrophilic/hydrophobic weight ratios were synthesized and characterized in detail. Depending on the diblock composition, smectic polymer vesicles and/or nanofibers were formed by adding water into a dilute solution of copolymers in dioxane. If THF is used instead of dioxane as solvent, solid spherical aggregates were obtained upon water addition for PEG₄₅-b-PAChol series, while macroscopic precipitation occurred for PEG₁₁₄-b-PAChol series. The mesomorphic and microphase segregation structures of the block copolymers in bulk were studied by X-ray scattering, DSC and POM. The interdigital smectic A (SmA_d) phase with a lamellar period of 4.25 nm was detected in all block copolymers. For PEG₁₁₄-b-PAChol₅ (PEG/PAChol weight ratio = 66/34) and PEG₁₁₄-b-PAChol₁₂ (45/55), lamellar type of microphase segregation was observed.     

Synthesis of amphiphilic macrocyclic graft copolymer consisting of a poly(ethylene oxide) ring and multi-poly(?-caprolactone) lateral chains

A series of amphiphilic macrocyclic graft copolymers composed of a hydrophilic poly(ethylene oxide) as ring and hydrophobic poly(?-caprolactone) as lateral chains with different grafting lengths and densities of side chains were prepared by a combination of anionic ring-opening polymerization and coordination-insertion ring-opening polymerization. The anionic ring-opening copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE) was carried out first using triethylene glycol and diphenylmethyl potassium (DPMK) as co-initiators, and a linear α,ω-dihydroxyl poly(ethylene oxide) with pendant protected hydroxymethyls (l-poly(EO-co-EEGE)) was obtained. The monomer reactivity ratios of these compounds are r_1(EO) = 1.20 ± 0.01 and r_2(EEGE) = 0.76 ± 0.02, respectively. Then the ring closure of l-poly(EO-co-EEGE) was achieved via an ether linkage by reaction with tosyl chloride (TsCl) in the presence of solid KOH. The crude cyclized product containing the linear chain-extended polymer was hydrolyzed in acidic conditions first and then purified by treating with α-CD. The pure cyclic copolymer of EO and glycidol (Gly) with multipendant hydroxymethyls [c-poly(EO-co-Gly)] as the macroinitiator was used further to initiate the ring-opening polymerization of ?-caprolactone (CL), and a series of amphiphilic macrocyclic graft copolymers c-PEO-g-PCL were obtained. The final products and intermediates were characterized by GPC, NMR and MALDI-TOF in detail.     

RAFT polymerization and self-assembly of thermoresponsive poly(N-decylacrylamide-b-N,N-diethylacrylamide) block copolymers bearing a phenanthrene fluorescent α-end group

Phenanthrene α-end-labeled poly(N-decylacrylamide-b-N,N-diethylacrylamide) (PDcA_n-b-PDEA_m) block copolymers consisting in a highly hydrophobic block (n = 11) and a thermoresponsive block with variable length (79 ≤ m ≤ 468) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. A new phenanthrene-labeled chain transfer agent (CTA) was synthesized and used to control the RAFT polymerization of a hydrophobic acrylamide derivative, N-decylacrylamide (DcA). This first block was further used as macroCTA to polymerize N,N-diethylacrylamide (DEA) in order to prepare diblock copolymers with the same hydrophobic block of PDcA (number average molecular weight: M_n = 2720 g mol⁻¹, polydispersity index: M_w/M_n = 1.13) and various PDEA blocks of several lengths (M_n = 10,000-60,000 g mol⁻¹) with a very high blocking efficiency. The resulting copolymers self-assemble in water forming thermoresponsive micelles. The critical micelle concentration (CMC) was determined using Förster resonance energy transfer (FRET) between phenanthrene linked at the end of the PDcA block and anthracene added to the solution at a low concentration (10⁻⁵ M), based on the fact that energy transfer only occurs when phenanthrene and anthracene are located in the core of the micelle. The CMC (∼2 μM) was obtained at the polymer concentration where the anthracene fluorescence intensity starts to increase. The size of the polymer micelles decreases with temperature increase around the lower critical solution temperature of PDEA in water (LCST ∼ 32 °C) owing to the thermoresponsiveness of the PDEA shell.     

Adsorption of block copolymers at latex surface and their utilization in emulsion polymerization

Amphiphilic block copolymers have been investigated for their utilization in emulsion polymerization of butyl methacrylate. Special attention has been paid to the adsorption mechanism of the block copolymers from systematic measurements of equilibrium adsorption isotherms. A series of well-defined water-soluble amphiphilic block copolymers, composed of poly(butyl methacrylate) and poly(sodium methacrylate) blocks, were synthesized by anionic polymerization of butyl methacrylate and tert-butyl methacrylate followed by the thermal deprotection of the tert-butyl ester groups and final hydrolysis. The number density of emulsion polymer particles N_P varied as [copolymer]^α, α lying between 0.44 and 0.73 according to the hydrophilic content of the copolymers. In contrast with SDS taken as a reference emulsifier, the adsorption of the copolymers was very strong and this provided quite an efficient stabilization of the polymer particles during emulsion polymerization, even at low concentrations (<10⁻⁴ mol L⁻¹) and low coverages (<10% of the interfacial area).     

Biodegradable multiblock PEO/PLA thermoplastic elastomers: molecular design and properties

Given the need for highly flexible biodegradable polymers, a series of poly(ethylene oxide)/poly(l-lactic acid) (PEO/PLA) (PELA) multiblock poly(ether-ester-urethane)s, were synthesized and characterized. The first step of the synthesis consisted of the ring-opening polymerization of l-lactide, initiated by the hydroxyl terminal groups of the PEO chain, followed by the chain extension of these PLA-PEO-PLA triblocks, using hexamethylene diisocyanate (HDI). The trimers comprised PEO segments in the 1000-10,000 molecular weight range, with the length of each PLA block covering the 200-10,000 interval. DSC and X-ray analyses revealed that, depending on their composition, amorphous matrices, monophasic crystalline materials and copolymers comprising two crystalline phases, were generated. The multiblock copolymers synthesized exhibited superior mechanical properties, with ultimate tensile strength values around 30 MPa, Young's moduli as low as 14 MPa and elongation at break values well above 1000%. Because of their phase segregated morphology, most of these multiblock copolymers displayed remarkable mechanical properties also when fully hydrated, with typical UTS values around 9 MPa.     

Biodegradable block copolymers with poly(ethylene oxide) and poly(glycolic acid‐valine) blocks

Biodegradable ABA triblock copolymers with poly(ethylene oxide) and poly(glycolic acid‐valine) blocks were synthesized via ring‐opening polymerization of cyclo(glycolic acid‐valine) using Ca‐alcoholates of hydroxytelechelic PEO as the initiator. The L‐valine residue racemized during copolymerization of cyclo(glycolic acid‐valine). The crystallization of the block copolymers decreases with decreasing PEO content in the triblock copolymers and with increasing length of the poly(glycolic acid‐valine) block. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2916–2919, 2002     

Self-association of double-hydrophilic copolymers of acrylic acid and poly(ethylene oxide) macromonomer

Poly(ethylene oxide) (PEO) end-capped by a methacrylate unsaturation was copolymerized with acrylic acid by RAFT with dibenzyltrithiocarbonate as a chain transfer agent. Tapered triblock copolymers consisting of a poly(acrylic acid) (PAA) inner block and comb-like outer blocks of PEO macromomers were formed as result of the comonomers reactivity ratios. Composition of these copolymers and length of the PEO branches were varied. Dynamic light scattering (DLS) was used to characterize the aggregates formed in water and to investigate their response to stimuli, such as pH, temperature and ionic strength. In parallel, the morphology of the aggregates was directly observed by transmission electron microscopy (TEM). Well-defined aggregates were formed in the 5<pH<8 range, with a morphology strongly depending on the copolymer composition. At pH<5, the copolymers were poorly soluble and no well-defined structure was observed, whereas free chains were formed at pH>8 as consequence of the complete ionization of the PAA block.     

pH- and temperature-responsive amphiphilic diblock copolymers of 4-vinylpyridine and oligoethyleneglycol methacrylate synthesized by RAFT polymerization

Diblock copolymers of 4-vinylpyridine (4VP) and oligoethyleneglycol methyl ether methacrylate (OEGMA) were synthesized for the first time using RAFT polymerization technique as potential drug delivery systems. Effects of the number of ethylene glycol units in OEGMA, chain length of hydrophobic P4VP block, pH, concentration and temperature on the solution behavior of the copolymers were investigated comprehensively. Copolymer chains formed micelles at pH values higher than 5 whereas unimeric polymers were observed to exist below pH 5, owing to the repulsion between positively charged P4VP blocks. The size of the micelles was dependent on the relative length of blocks, P4VP and POEGMA. Thermo-responsive properties of copolymers were investigated depending on the pH and length of P4VP block. The increase in the length of P4VP block decreased the LCST substantially at pH 7. At pH 3, LCST of copolymers shifted to higher temperatures due to the increased interaction of copolymers with water through positively charged P4VP block.     

Preparation of star copolymers with three arms of poly(ethylene oxide-co-glycidol)-graft-polystyrene and investigation of their aggregation in water

The star graft copolymers with three arms composed of poly(ethylene oxide) (PEO) as main chain and polystyrene (PS) as side chains were prepared by sequential anionic ring-opening copolymerization of ethylene oxide and ethoxyethyl glycidyl ether (EEGE), and then atom transfer radical polymerization (ATRP) of styrene. The anionic ring-opening copolymerization of EO and EEGE was carried out using 2-ethyl-2-hydroxymethyl-1,3-propanediol as trifunctional initiator and diphenylmethyl potassium (DPMK) as deprotonating agent. The resulting three-arm star copolymer [poly(EO-co-EEGE)]₃ could be easily hydrolyzed to unmask the pendant hydroxyl groups without affecting the PEO chains. The switch from the first to the second mechanism was completed by the reaction of the multi-pendant hydroxyl groups of three-arm PEO chain with 2-bromoisobutyryl bromide. The obtained poly(ethylene oxide-co-2-bromoisobutyryloxyglycidyl ether), [poly(EO-co-BiBGE)]₃, was used as macroinitiators to initiate the polymerization of styrene in bulk at 90 °C by ATRP. The final products and intermediates were characterized by NMR, SEC and IR in detail. The amphiphilic star graft copolymers synthesized can form micelles in water. The critical micelle concentration (cmc) determined by fluorescence spectra was about 5 × 10⁻⁷ g/mL. Sphere micelles were observed by transmission electron microscopy (TEM) at low copolymer concentration (6 × 10⁻⁵ g/mL), but the micelle shape became irregular when the copolymer concentration increased to 6 × 10⁻⁴ g/mL.     

Synthesis, reactivity, and pH-responsive assembly of new double hydrophilic block copolymers of carboxymethyldextran and poly(ethylene glycol)

Double hydrophilic block copolymers (DHBC) were prepared by end-to-end coupling of two biocompatible water-soluble homopolymers: the polysaccharide dextran (M_w 8300 or 14,700 g mol⁻¹) and ω-amino poly(ethylene glycol) (PEG-NH₂, M_w 3000 or 7000 g mol⁻¹). The synthesis involved, first, specific oxidation of the dextran terminal aldehyde group and, second, covalent linkage of PEG-NH₂ via a lactone aminolysis reaction. The diblock copolymers dextran-PEG (DEX-PEG) were converted in high yield into the corresponding carboxymethyldextran-PEG (CMD-PEG) derivatives with control over the degree of substitution, from 30 to 85 mol% CH₂COOH groups per glucopyranosyl unit. Further modifications of a CMD-PEG block copolymer led to N-(2-aminoethyl)carbamidomethyldextran-PEG yielding a pair of oppositely-charged DHBC of identical charge density, chain length, and neutral block/charged block content. The properties of CMD-PEG in aqueous solutions were studied by static and dynamic light scattering as a function of solution pH, providing evidence of the pH-sensitive assembly of the copolymers driven by inter- and intra-chain hydrogen-bond formation.     

Honeycomb structured porous films from amphiphilic block copolymers prepared via RAFT polymerization

The synthesis of polystyrene-block-poly(N,N-dimethylacrylamide) (PS-b-PDMA) via RAFT polymerization was investigated in detail. Two different RAFT agents - benzyl dithiobenzoate and 3-(benzylsulfanylthiocarbonylsufanyl) propionic acid, were employed to prepare polystyrene macroRAFT agents with molecular weights varying between 3000 g mol⁻¹ and 62,000 g mol⁻¹ and polydispersities between 1.1 and 1.4. Chain extensions with N,N-dimethylacrylamide (DMA) were carried out using a constant monomer to RAFT agent concentration ([DMA]/[RAFT] = 500), to compare the rate of polymerization in dependency of the polystyrene chain length. A decreasing rate of polymerization with increasing block length was observed. Depending on the sizes of the first block and type of RAFT agents used, chain extension polymerization with DMA was found to be incomplete, leading to significant low molecular weight tailing in the GPC analyses. Block copolymers prepared using 3-(benzylsulfanylthiocarbonylsufanyl) propionic acid, followed the expected molecular weight evolutions with polydispersity indices of 1.2-1.4. In contrast, block copolymers using benzyl dithiobenzoate clearly showed bimodal molecular weight distributions, especially when the longest PS macroRAFT agent with a molecular weight of 38,000 g mol⁻¹ was employed. These amphiphilic block copolymers were used to fabricate honeycomb structured porous films using the breath figure technique. The regularity of the film was considerably influenced by the humidity of the environment, which could be controlled by the rate of the airflow or the humidity in the casting chamber. The interaction between the hydrophilic block copolymer and the humidity was found responsible for the delicate equilibrium during the casting process, which prevented high pores regularity at very low (below 50%) and at elevated (above 80%) humidity. The interactions of the hydrophilic block with the humidity were observed to superimpose an additional nano-scaled order onto the hexagonal micron-sized porous array. Pores, which are created by encapsulation of water droplets, were found to be more hydrophilic than the surface. Confocal microscopy studies were employed to locate hydrophilic blocks within the film using a fluorescence labeled PDMA polymer.     

Crosslinkable surfactants based on linoleic acid-functionalized block copolymers of ethylene oxide and ε-caprolactone for the preparation of stable PMMA latices

Amphiphilic diblock and triblock copolymers consisting of poly(ethylene oxide) (PEO) as (central) hydrophilic segment and poly(ε-caprolactone) (PCL) as hydrophobic segment(s) were prepared by ring opening polymerization. The length of the PEO segment was kept constant , whereas the length of the PCL block(s) was either 6 or 10 units for diblock copolymers and 3 or 5 units at each end for the triblock copolymers. These block copolymers were end-functionalized by esterification with linoleic acid (LA), which contains reactive double bonds. The autoxidative behavior of PEO₄₅-(CL₃-LA)₂ functionalized triblock copolymers was investigated by exposure of films to air at ambient conditions. Ninety percent of the double bonds had disappeared in 15 d and a crosslinked structure was obtained after 30 d. Critical micelle concentrations (CMC) of the crosslinkable surfactants were in the range of 0.08-0.19 mmol/l for the diblock copolymer and of 0.19-0.26 mmol/l for the triblock copolymer. The surface tension of aqueous surfactant solutions at the CMC (γ_CMC) (25 °C) varied from 47.1 to 51.4 mN/m for the diblock and from 45.6 to 48.1 mN/m for the triblock systems. For both systems CMC and γ_CMC increase with increasing HLB values. These surfactants were used in PMMA latex preparations. The latices of PMMA prepared with LA-functionalized diblock and triblock copolymers yielded narrow particle size distributions and particle sizes of 180 and 370 nm, respectively, whereas latices prepared with SDS had a particle size of 90 nm. After extraction of the latex particles with methanol, the amounts of the unextractable (either buried or copolymerized) LA-functionalized diblock and triblock copolymers found in extracted PMMA latex particles were 10 and 24% of the initial amount of surfactant added respectively. Control experiments with a stearic acid (SA) containing diblock copolymer showed that the amount of buried surfactant in PMMA latices was 6.5%. By comparing the overall latex characteristics and stability (shelf stability, freeze-thaw testing and addition of electrolyte solutions and ethanol) it was concluded that an LA-functionalized diblock copolymer (MPEO₄₅-CL₁₀-LA) gave better stabilization of PMMA latices than an LA-functionalized triblock copolymer of comparable composition and HLB value.     

Synthesis of polyether-based block copolymers based on poly(propylene oxide) and terephthalates

Poly(propylene oxide) (PPO) is a low reactive telechelic polyether and the synthesis of high molecular weight poly(propylene oxide)-based block copolymers was studied. The poly(propylene oxide) used was end capped with 20 wt % ethylene oxide and had a molecular weight of 2300 g/mol (ultra-low monol PEO-b-PPO-b-PEO). The type of terephthalic acid based precursors was varied: terephthalic acid, dimethyl terephthalate, diphenyl terephthalate, di(trifluoro ethyl) terephthalate, di(p-nitrophenyl) terephthalate) and terephthalic acid chloride. High molecular weight poly(propylene oxide) based segmented block copolymers were obtained with diphenyl terephthalate (inherent viscosity: 1.6 dl/g).The synthesis of polyether(ester-amide)s comprising PPO and isophthalamide-based segments was also studied by varying the polymerization temperature and time. High molecular weight poly(propylene oxide) block copolymers could be obtained if the reaction was carried out for 2 h at 250 °C under vacuum. Higher temperatures (280 °C) and longer times result in lower inherent viscosities, probably due to degradation of the polyether.     

两亲扩展型共聚物的合成及中间极性嵌段对乳化性能的影响

采用聚乙二醇单甲醚(Mn=1 900,5 000)分别引发丙交酯和ε-己内酯开环聚合合成了中间嵌段(PLA)聚合度递增的聚乙二醇-聚丙交酯-聚己内酯(MPEG-PLA-PCL)两亲扩展型共聚物和相应的聚乙二醇-聚己内酯(MPEG-PCL)两嵌段共聚物。用FTIR、1HNMR和GPC对产物结构进行了表征,研究了共聚物和常规低分子表面活性剂的乳化性能,探讨了中间极性嵌段的长度对共聚物乳化性能的影响。结果表明,对于甲苯/水体系,共聚物可用于制备稳定的O/W型乳液,且三嵌段共聚物的乳化性能优于低分子表面活性剂;随着引入PLA嵌段聚合度的增加,共聚物的乳化能力呈先增加后减小的趋势;相对于MPEG1900系列共聚物,MPEG5000系列共聚物中需要引入更长的中间嵌段才能获得最佳乳化性能。     

Composition and properties of complexes between anionic liposomes and diblock copolymers with cationic and poly(ethylene oxide) blocks

A series of cationic diblock copolymers were synthesized via sequential anionic polymerization of 2‐vinylpyridine and ethylene oxide and further quaternization of the resulting diblock copolymers with dimethyl sulfate. Diblock copolymers with a degree of polymerization (DP) of the cationic block equal to 40 and DP of the poly(ethylene oxide) (PEO) block equal to 45, 210 and 450, as well as a cationic homopolymer with DP = 40 (control), were adsorbed on the surface of anionic liposomes of 40–60 nm in diameter. The liposomes were constructed with egg lecithin admixed with 0.1 mole fraction of a doubly anionic lipid, cardiolipin. The liposome–polymer complexes were characterized using electrophoretic mobility measurements, dynamic light scattering, conductivity, fluorescence and UV spectroscopy, and differential scanning calorimetry. Adsorption of the polymers causes the liposomes to aggregate; the only exception is the diblock copolymer with DP of the PEO block of 450, which shows an aggregation‐preventing effect. In all cases, the integrity of liposomes is retained upon their complexation with polymers. The diblock copolymer with a short PEO block induces clustering of anionic lipid in the outer leaflet of the membrane; this effect becomes less pronounced with increasing DP of the PEO block. The differences in behaviour of the diblock copolymers are explained in terms of copolymer cluster formation via hydrogen bonding between neighbouring PEO blocks. These observations are important for interpretation of biological effects produced by cationic polymers and selection of cationic polymers for biomedical applications. © 2017 Society of Chemical Industry     

pH/temperature sensitive poly(ethylene glycol)-based biodegradable polyester block copolymer hydrogels

Novel pH and temperature sensitive biodegradable block copolymers composed of poly(ethylene glycol) (PEG), polyglycolide (GA), ?-caprolactone (CL) and sulfamethazine oligomers (OSMs) were synthesized by ring opening polymerization and 1,3-dicyclohexyl-carbodiimide (DCC) mediated coupling reactions. Their physicochemical properties in aqueous media were characterized by ¹H NMR spectroscopy and gel permeation spectroscopy. The sol-gel phase transition behavior of OSM-PCGA-PEG-PCGA-OSM block copolymers was investigated both in solution and injection to PBS buffer at pH 7.4 and 37 °C. Aqueous solutions of OSM-PCGA-PEG-PCGA-OSM changed from a sol to a gel phase with increasing temperature and decreasing pH. The sol-gel transition properties of these block copolymers are influenced by the hydrophobic/hydrophilic balance of the copolymers, block length, hydrophobicity, stereoregularity of the hydrophobic components within the block copolymer, and the ionization of the pH functional groups in the copolymer, which depends on the environmental pH. Degradation of the triblock and pentablock copolymers at 37 °C (pH 7.4), and at 0 °C and 5 °C both at pH 8.0, was investigated. It was demonstrated here using the in vitro test method, that the anticancer agent paclitaxel (PTX) could be loaded and released by the pH and temperature sensitive OSM-PCGA-PEG-PCGA-OSM block copolymer, such that this could be used as a suitable matrix for subcutaneous injection in drug delivery systems.     

Thermosensitive dendritic stars of tert-butyl-glycidylether and glycidol - Synthesis and encapsulation properties

Dendritic block copolymers of hydrophobic core and hydrophilic shell were prepared by a multi-step process based on anionic ring-opening polymerization. In the first step, amphiphilic stars with four or six poly(tert-butyl-glycidylether)-block-polyglycidol arms were synthesized. The hydroxyl groups of polyglycidol after ionization served as initiation centers for sequential anionic polymerization of tert-butyl-glycidylether and 1-ethoxyethyl-glycidylether. Selective removal of protective groups of glycidol hydroxyls yielded amphiphilic, dendritic copolymers with a hydrophobic core and hydrophilic shell. The hydrophobicity of the dendritic core depended on the composition of the star macroinitiator. The number of reactive hydroxyl groups in the shell was controlled by the number and length of the outer polyglycidol blocks. The structure and molar mass of the copolymers obtained were characterized by GPC-MALLS and NMR spectroscopy.The aqueous solution properties of the copolymers were studied. Some of dendritic copolymers aggregated at elevated temperature. The dependence of phase transition temperature and dimension of aggregates on the copolymer composition were followed by light scattering techniques. The spherical aggregates were visualized by AFM. The encapsulation efficiency of a hydrophobic compound (pyrene) was followed by UV-VIS spectroscopy.