Waterproof,Breathable, and Antibacterial Self‐Powered e‐Textiles Based on Omniphobic Triboelectric Nanogenerators

Multifunctional electronic textiles (e‐textiles) incorporating miniaturized electronic devices will pave the way toward a new generation of wearable devices and human–machine interfaces. Unfortunately, the development of e‐textiles is subject to critical challenges, such as battery dependence, breathability, satisfactory washability, and compatibility with mass production techniques. This work describes a simple and cost‐effective method to transform conventional garments and textiles into waterproof, breathable, and antibacterial e‐textiles for self‐powered human–machine interfacing. Combining embroidery with the spray‐based deposition of fluoroalkylated organosilanes and highly networked nanoflakes, omniphobic triboelectric nanogenerators (R^F‐TENGs) can be incorporated into any fiber‐based textile to power wearable devices using energy harvested from human motion. R^F‐TENGs are thin, flexible, breathable (air permeability 90.5 mm s^?1), inexpensive to fabricate (<0.04$ cm^?2), and capable of producing a high power density (600 µW cm^?2). E‐textiles based on R^F‐TENGs repel water, stains, and bacterial growth, and show excellent stability under mechanical deformations and remarkable washing durability under standard machine‐washing tests. Moreover, e‐textiles based on R^F‐TENGs are compatible with large‐scale production processes and exhibit high sensitivity to touch, enabling the cost‐effective manufacturing of wearable human–machine interfaces.     

Single‐Thread‐Based Wearable and Highly Stretchable Triboelectric Nanogenerators and Their Applications in Cloth‐Based Self‐Powered Human‐Interactive and Biomedical Sensing

The development of wearable and large‐area fabric energy harvester and sensor has received great attention due to their promising applications in next‐generation autonomous and wearable healthcare technologies. Here, a new type of “single” thread‐based triboelectric nanogenerator (TENG) and its uses in elastically textile‐based energy harvesting and sensing have been demonstrated. The energy‐harvesting thread composed by one silicone‐rubber‐coated stainless‐steel thread can extract energy during contact with skin. With sewing the energy‐harvesting thread into a serpentine shape on an elastic textile, a highly stretchable and scalable TENG textile is realized to scavenge various kinds of human‐motion energy. The collected energy is capable to sustainably power a commercial smart watch. Moreover, the simplified single triboelectric thread can be applied in a wide range of thread‐based self‐powered and active sensing uses, including gesture sensing, human‐interactive interfaces, and human physiological signal monitoring. After integration with microcontrollers, more complicated systems, such as wireless wearable keyboards and smart beds, are demonstrated. These results show that the newly designed single‐thread‐based TENG, with the advantage of interactive, responsive, sewable, and conformal features, can meet application needs of a vast variety of fields, ranging from wearable and stretchable energy harvesters to smart cloth‐based articles.     

High‐Energy Asymmetric Supercapacitor Yarns for Self‐Charging Power Textiles

Rapid growth of electronic textile increases the demand for textile‐based power sources, which should have comparable lightweight, flexibility, and comfort. In this work, a self‐charging power textile interwoven by all‐yarn‐based energy‐harvesting triboelectric nanogenerators (TENG) and energy‐storing yarn‐type asymmetric supercapacitors (Y‐ASC) is reported. Common polyester yarns with conformal Ni/Cu coating are utilized as 1D current collectors in Y‐ASCs and electrodes in TENGs. The solid‐state Y‐ASC achieves high areal energy density (≈78.1 µWh cm^?2), high power density (14 mW cm^?2), stable cycling performance (82.7% for 5000 cycles), and excellent flexibility (1000 cycles bending for 180°). The TENG yarn can be woven into common fabrics with desired stylish designs to harvest energy from human daily motions at high output (≈60 V open‐circuit voltage and ≈3 µA short‐circuit current). The integrated self‐charging power textile is demonstrated to power an electronic watch without extra recharging by other power sources, suggesting its promising applications in electronic textiles and wearable electronics.     

Wearable and Implantable Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) are a promising technology to convert mechanical energy to electrical energy based on coupled triboelectrification and electrostatic induction. With the rapid development of functional materials and manufacturing techniques, wearable and implantable TENGs have evolved into playing important roles in clinic and daily life from in vitro to in vivo. These flexible and light membrane‐like devices have the potential to be a new power supply or sensor element, to meet the special requirements for portable electronics, promoting innovation in electronic devices. In this review, the recent advances in wearable and implantable TENGs as sustainable power sources or self‐powered sensors are reviewed. In addition, the remaining challenges and future possible improvements of wearable and implantable TENG‐based self‐powered systems are discussed.     

Stretchable Energy‐Harvesting Tactile Interactive Interface with Liquid‐Metal‐Nanoparticle‐Based Electrodes

Energy‐harvesting electronic skin (E‐skin) is highly promising for sustainable and self‐powered interactive systems, wearable human health monitors, and intelligent robotics. Flexible/stretchable electrodes and robust energy‐harvesting components are critical in constructing soft, wearable, and energy‐autonomous E‐skin systems. A stretchable energy‐harvesting tactile interactive interface is demonstrated using liquid metal nanoparticles (LM‐NPs)‐based electrodes. This stretchable energy‐harvesting tactile interface relies on triboelectric nanogenerator composed of a galinstan LM‐NP‐based stretchable electrode and patterned elastic polymer friction and encapsulation layer. It provides stable and high open‐circuit voltage (268 V), short‐circuit current (12.06 µA), and transferred charges (103.59 nC), which are sufficient to drive commercial portable electronics. As a self‐powered tactile sensor, it presents satisfactory and repeatable sensitivity of 2.52 V·kPa^?1 and is capable of working as a touch interactive keyboard. The demonstrated stretchable and robust energy‐harvesting E‐skin using LM‐NP‐based electrodes is of great significance in sustainable human–machine interactive system, intelligent robotic skin, security tactile switches, etc.     

Hybrid Smart Fiber with Spontaneous Self‐Charging Mechanism for Sustainable Wearable Electronics

Smart wearable electronics that are fabricated on light‐weight fabrics or flexible substrates are considered to be of next‐generation and portable electronic device systems. Ideal wearable and portable applications not only require the device to be integrated into various fiber form factors, but also desire self‐powered system in such a way that the devices can be continuously supplied with power as well as simultaneously save the acquired energy for their portability and sustainability. Nevertheless, most of all self‐powered wearable electronics requiring both the generation of the electricity and storing of the harvested energy, which have been developed so far, have employed externally connected individual energy generation and storage fiber devices using external circuits. In this work, for the first time, a hybrid smart fiber that exhibits a spontaneous energy generation and storage process within a single fiber device that does not need any external electric circuit/connection is introduced. This is achieved through the employment of asymmetry coaxial structure in an electrolyte system of the supercapacitor that creates potential difference upon the creation of the triboelectric charges. This development in the self‐charging technology provides great opportunities to establish a new device platform in fiber/textile‐based electronics.     

On‐Body Bioelectronics: Wearable Biofuel Cells for Bioenergy Harvesting and Self‐Powered Biosensing

The growing power demands of wearable electronic devices have stimulated the development of on‐body energy‐harvesting strategies. This article reviews the recent progress on rapidly emerging wearable biofuel cells (BFCs), along with related challenges and prospects. Advanced on‐body BFCs in various wearable platforms, e.g., textiles, patches, temporary tattoo, or contact lenses, enable attractive advantages for bioenergy harnessing and self‐powered biosensing. These noninvasive BFCs open up unique opportunities for utilizing bioenergy or monitoring biomarkers present in biofluids, e.g., sweat, saliva, interstitial fluid, and tears, toward new biomedical, fitness, or defense applications. However, the realization of effective wearable BFC requires high‐quality enzyme‐electronic interface with efficient enzymatic and electrochemical processes and mechanical flexibility. Understanding the kinetics and mechanisms involved in the electron transfer process, as well as enzyme immobilization techniques, is essential for efficient and stable bioenergy harvesting under diverse mechanical strains and changing operational conditions expected in different biofluids and in a variety of outdoor activities. These key challenges of wearable BFCs are discussed along with potential solutions and future prospects. Understanding these obstacles and opportunities is crucial for transforming traditional bench‐top BFCs to effective and successful wearable BFCs.     

Self‐Healing,Flexible, and Tailorable Triboelectric Nanogenerators for Self‐Powered Sensors based on Thermal Effect of Infrared Radiation

Self‐healing triboelectric nanogenerators (TENGs) with flexibility, robustness, and conformability are highly desirable for promising flexible and wearable devices, which can serve as a durable, stable, and renewable power supply, as well as a self‐powered sensor. Herein, an entirely self‐healing, flexible, and tailorable TENG is designed as a wearable sensor to monitor human motion, with infrared radiation from skin to promote self‐healing after being broken based on thermal effect of infrared radiation. Human skin is a natural infrared radiation emitter, providing favorable conditions for the device to function efficiently. The reversible imine bonds and quadruple hydrogen bonding (UPy) moieties are introduced into polymer networks to construct self‐healable electrification layer. UPy‐functionalized multiwalled carbon nanotubes are further incorporated into healable polymer to obtain conductive nanocomposite. Driven by the dynamic bonds, the designed and synthesized materials show excellent intrinsic self‐healing and shape‐tailorable features. Moreover, there is a robust interface bonding in the TENG devices due to the similar healable networks between electrification layer and electrode. The output electric performances of the self‐healable TENG devices can almost restore their original state when the damage of the devices occurs. This work presents a novel strategy for flexible devices, contributing to future sustainable energy and wearable electronics.     

Stretchable and Shape-Adaptable Triboelectric Nanogenerator Based on Biocompatible Liquid Electrolyte for Biomechanical Energy Harvesting and Wearable Human–Machine Interaction

The significant demand of sustainable power sources has been triggered by the development of wearable electronics (e.g., electronic skin, human health monitors, and intelligent robotics). However, tensile strain limitation and low conformability of existing power sources cannot match their development. Herein, a stretchable and shape-adaptable liquid-based single-electrode triboelectric nanogenerator (LS-TENG) based on potassium iodide and glycerol (KI-Gly) liquid electrolyte as work electrode is developed for harvesting human motion energy to power wearable electronics. The LS-TENG demonstrates high output performances (open-circuit voltage of 300 V, short-circuit current density of 17.5 mA m^–2, and maximum output power of 2.0 W m^–2) and maintains the stable output performances without deterioration under 250% tension stretching and after 10 000 cycles of repeated contact-separation motion. Moreover, the LS-TENG can harvest biomechanical energy, including arm shaking, human walking, and hand tapping, to power commercial electronics without extra power sources. The LS-TENG attached on different joints of body enables to work as self-powered human motion monitor. Furthermore, a flexible touch panel based on the LS-TENG combined with a microcontroller is explored for human–machine interactions. Consequently, the stretchable and shape-adaptable LS-TENG based on KI-Gly electrolyte would act as an exciting platform for biomechanical energy harvesting and wearable human–machine interaction.     

Fingerprint‐Inspired Conducting Hierarchical Wrinkles for Energy‐Harvesting E‐Skin

In the field of bionics, sophisticated and multifunctional electronic skins with a mechanosensing function that are inspired by nature are developed. Here, an energy‐harvesting electronic skin (energy‐E‐skin), i.e., a pressure sensor with energy‐harvesting functions is demonstrated, based on fingerprint‐inspired conducting hierarchical wrinkles. The conducting hierarchical wrinkles, fabricated via 2D stretching and subsequent Ar plasma treatment, are composed of polydimethylsiloxane (PDMS) wrinkles as the primary microstructure and embedded Ag nanowires (AgNWs) as the secondary nanostructure. The structure and resistance of the conducting hierarchical wrinkles are deterministically controlled by varying the stretching direction, Ar plasma power, and treatment time. This hierarchical‐wrinkle‐based conductor successfully harvests mechanical energy via contact electrification and electrostatic induction and also realizes self‐powered pressure sensing. The energy‐E‐skin delivers an average output power of 3.5 mW with an open‐circuit voltage of 300 V and a short‐circuit current of 35 µA; this power is sufficient to drive commercial light‐emitting diodes and portable electronic devices. The hierarchical‐wrinkle‐based conductor is also utilized as a self‐powered tactile pressure sensor with a sensitivity of 1.187 mV Pa^‐1 in both contact‐separation mode and the single‐electrode mode. The proposed energy‐E‐skin has great potential for use as a next‐generation multifunctional artificial skin, self‐powered human–machine interface, wearable thin‐film power source, and so on.     

A Nonmetallic Stretchable Nylon‐Modified High Performance Triboelectric Nanogenerator for Energy Harvesting

As a new energy harvesting strategy, triboelectric nanogenerators which have a broad application prospect in collecting environmental energy, human body mechanical energy, and supplying power for low‐power electronic devices, have attracted extensive attention. However, technology challenges still exist in the stretchability for the preparation of some high‐performance triboelectric materials. In this work, a new strategy for nonmetallic nylon‐modified triboelectric nanogenerators (NM‐TENGs) is reported. Nylon is introduced as a high performance friction material to enhance the output performance of the stretchable TENG. The uniform matrix reduces the difficulty of heterogeneous integration and enhances the structural strength. The open‐circuit voltage (V_OC) and short‐circuit current (I_SC) of NM‐TENG can reach up to 1.17 kV and 138 µA, respectively. The instantaneous power density reaches 11.2 W m^?2 and the rectified output can directly light ≈480 LEDs. The transferred charge density is ≈100 µC m^?2 in one cycle when charging the capacitor. In addition, a low‐power electronic clock can be driven directly by the rectified signal without additional circuits. NM‐TENG also has high enough strain rate and can be attached to the human body for energy harvesting effectively. This work provides a new idea for fabrication of stretchable TENGs and demonstrates their potential application.     

Light‐Powered Healing of a Wearable Electrical Conductor

Mechanical failure along a conductive pathway can cause unexpected shutdown of an electronic devices, ultimately limiting the device lifetime. To address this problem, various systems to realize healable electrical conductors have been proposed; however, rapid, noninvasive, and on‐demand healing, factors that are all synergistically required, especially for wearable device applications, still remains challenging. Here, a light‐powered healable electrical conductor (conceptualized as photofluidic diffusional system) is proposed for simple‐, fast‐, and easy‐to‐implement wearable devices (e.g., the electronic skin, sensitive to mechanical motion). Contrary to other implementations such as capsules, heat, water, and mechanical forces, green light even with low intensity has potential to provide fast (less than 3 min) and repetitive recovery of a damaged electrical conductor without any direct invasion. Also, the multiple, irregular cracks resulting from vigorous motions of wearable devices can be simultaneously recovered regardless of the light incident angles and crack propagation directions, thus, making light‐powered healing more accessible to wearable devices beyond existing system options. To develop and demonstrate the key concepts of this system, combined studies on materials, integrations, and light‐powering strategy for recovering a damaged wearable electrical conductor are systematically carried out in the present work.     

3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage

Conventional bulky and rigid power systems are incapable of meeting flexibility and breathability requirements for wearable applications. Despite the tremendous efforts dedicated to developing various 1D energy storage devices with sufficient flexibility, challenges remain pertaining to fabrication scalability, cost, and efficiency. Here, a scalable, low‐cost, and high‐efficiency 3D printing technology is applied to fabricate a flexible all‐fiber lithium‐ion battery (LIB). Highly viscous polymer inks containing carbon nanotubes and either lithium iron phosphate (LFP) or lithium titanium oxide (LTO) are used to print LFP fiber cathodes and LTO fiber anodes, respectively. Both fiber electrodes demonstrate good flexibility and high electrochemical performance in half‐cell configurations. All‐fiber LIB can be successfully assembled by twisting the as‐printed LFP and LTO fibers together with gel polymer as the quasi‐solid electrolyte. The all‐fiber device exhibits a high specific capacity of ≈110 mAh g^?1 at a current density of 50 mA g^?1 and maintains a good flexibility of the fiber electrodes, which can be potentially integrated into textile fabrics for future wearable electronic applications.     

Recent Progress in 2D-Nanomaterial-Based Triboelectric Nanogenerators

The integration of triboelectric nanogenerators (TENGs) and 2D nanomaterials brings about 2D-nanomaterial-based TENGs (2D-TENGs) that promote the rapid development of self-powered sensing systems and wearable electronics. Extraordinary physical, electronic, chemical, and optical properties of 2D nanomaterials endow 2D-TENGs with improved output performance. This review presents the state of the art of 2D-TENGs with respect to basic classifications, enhancement mechanisms, special advantages, output performances, and applications in energy harvesting and self-powered sensing. Furthermore, several challenges that can impede applications of 2D-TENGs are discussed.     

Self‐Powered Iontophoretic Transdermal Drug Delivery System Driven and Regulated by Biomechanical Motions

Transdermal drug delivery (TDD) systems with feedback control have attracted extensive research and clinical interest owing to their unique advantages of convenience, self‐administration, and safety. Here, a self‐powered wearable iontophoretic TDD system that can be driven and regulated by the energy harvested from biomechanical motions is proposed for closed‐loop motion detection and therapy. A wearable triboelectric nanogenerator (TENG) is used as the motion sensor and energy harvester that can convert biomechanical motions into electricity for iontophoresis without stored‐energy power sources, while a hydrogel‐based soft patch with side‐by‐side electrodes is designed to enable noninvasive iontophoretic TDD. Proof‐of‐concept experiments on pig skin with dyes as model drugs successfully demonstrate the feasibility of the proposed system. This work not only extends the application of TENG in the biomedical field, but may also provide a cost‐effective solution for noninvasive, electrically assisted TDD with closed‐loop sensing and treatment.     

Dynamic Photomask‐Assisted Direct Ink Writing Multimaterial for Multilevel Triboelectric Nanogenerator

Triboelectric nanogenerator (TENG) devices are extensively studied as a mechanical energy harvester and self‐powered sensor for wearable electronics and physiological monitoring. However, the conventional TENG fabrication involving assembling steps and using the single property of matrix material suffers from simple devices shape and a single level of mechanical response for sensing and energy harvesting. Here, the printed multimaterial matrix for multilevel mechanical‐responsive TENG with on‐demand reconfiguration of shape is reported. A multimaterial 3D printing approach by using dynamic photomask‐assisted direct ink writing printing together with a two‐stage curing hybrid ink is first developed. Multimaterial structures with location‐specific properties, such as tensile modulus, failure stress, and glass transition temperature for controlled deformation, crack propagation path, and sequential shape memory, are directly printed. The printed multimaterial structure with sequential deformation behavior is used to fabricate a multilevel‐TENG (mTENG) device for multiple level mechanical energy harvesters and sensors. It is demonstrated that the mTENG can be embedded in shoe insoles to achieve both comfortable wearing and motion state monitoring. This work provides a new approach to combine multimaterial 3D printing with TENG devices for functional wearable electronics as energy harvester and sensors.     

Wearable Energy Generating and Storing Textile Based on Carbon Nanotube Yarns

The challenges of textiles that can generate and store energy simultaneously for wearable devices are to fabricate yarns that generate electrical energy when stretched, yarns that store this electrical energy, and textile geometries that facilitate these functions. To address these challenges, this research incorporates highly stretchable electrochemical yarn harvesters, where available mechanical strains are large and electrochemical energy storing yarns are achieved by weaving. The solid‐state yarn harvester provides a peak power of 5.3 W kg^?1 for carbon nanotubes. The solid‐state yarn supercapacitor provides stable performance when dynamically deformed by bending and stretching, for example. A textile configuration that consists of harvesters, supercapacitors, and a Schottky diode is produced and stores as much electrical energy as is needed by a serial or parallel connection of the harvesters or supercapacitors. This textile can be applied as a power source for health care devices or other wearable devices and be self‐powered sensors for detecting human motion.     

A Dual‐Functional Graphene‐Based Self‐Alarm Health‐Monitoring E‐Skin

Diseases such as cardiovascular problems and sleep apnea cause mass deaths annually due to a lack of timely and portable monitoring and alarm measures. Various wearable devices for health monitoring have been intensely researched to reduce mortality. However, these devices themselves can only detect physiological signals; they cannot sound an alarm. Therefore, they must rely on mobile phones or other peripheral devices such as speakers or vibration motors to sound an alarm, which may result in a patient missing the optimal treatment. It is valuable to develop a self‐alarm health monitoring device with the dual functions of physiological signal detection and sound alarm simultaneously. A one‐step laser‐induced graphene (LIG)‐based electronic skin (E‐skin) is fabricated to perform health monitoring and alarm at the same time, which benefit from its both excellent mechanical and acoustical performance. These customized shutter‐patterned E‐skins have an ultrahigh sensitivity of 316.3 and can detect various biosignals such as wrist pulse, respiratory, etc. They also have a self‐alarm function and can sound an alarm when detecting abnormal situations. This study addresses the multifunctional integration required for multisensors, which will open further applications in wearable sensors and health‐care devices.     

Body Heat Powered Wirelessly Wearable System for Real-time Physiological and Biochemical Monitoring

Through harvesting energy from the environment or human body, self-power wearable electronics have an opportunity to break through the limitations of battery supply and achieving long-term continuous operation. Here, a wireless wearable monitoring system driven entirely by body heat is implemented. Based on the principle of maximizing heat utilization, while optimizing internal resistance and heat dissipation, the stretchable TEG improves the power density of previous similar devices from only a few microwatts per square centimeter to tens and makes it possible to continuously drive wireless wearable electronic systems. Furthermore, ceaseless self-power energy gives wearable electronics unparalleled continuous working ability, which can realize the tracking and monitoring of biochemical and physiological indicators at different time scale. A practical system demonstrates the ability to real-time monitor heart rate, sweat ingredient and body motion at a high sampling rate. This study marks an important advance of self-powered wearable electronics for wirelessly real-time healthy monitoring.     

Multiaxial and Transparent Strain Sensors Based on Synergetically Reinforced and Orthogonally Cracked Hetero‐Nanocrystal Solids

Wearable strain sensors are widely researched as core components in electronic skin. However, their limited capability of detecting only a single axial strain, and their low sensitivity, stability, opacity, and high production costs hinder their use in advanced applications. Herein, multiaxially highly sensitive, optically transparent, chemically stable, and solution‐processed strain sensors are demonstrated. Transparent indium tin oxide and zinc oxide nanocrystals serve as metallic and insulating components in a metal–insulator matrix and as active materials for strain gauges. Synergetic sensitivity‐ and stability‐reinforcing agents are developed using a transparent SU‐8 polymer to enhance the sensitivity and encapsulate the devices, elevating the gauge factor up to over 3000 by blocking the reconnection of cracks caused by the Poisson effect. Cross‐shaped patterns with an orthogonal crack strategy are developed to detect a complex multiaxial strain, efficiently distinguishing strains applied in various directions with high sensitivity and selectivity. Finally, all‐transparent wearable strain sensors with Ag nanowire electrodes are fabricated using an all‐solution process, which effectively measure not only the human motion or emotion, but also the multiaxial strains occurring during human motion in real time. The strategies can provide a pathway to realize cost‐effective and high‐performance wearable sensors for advanced applications such as bio‐integrated devices.