Revealing the Impact of F4‐TCNQ as Additive on Morphology and Performance of High‐Efficiency Nonfullerene Organic Solar Cells

Fluorinated molecule 2,3,5,6‐tetrafluoro‐7,7,8,8‐tetracyanoquinodimethane (F4‐TCNQ) and its derivatives have been used in polymer:fullerene solar cells primarily as a dopant to optimize the electrical properties and device performance. However, the underlying mechanism and generality of how F4‐TCNQ affects device operation and possibly the morphology is poorly understood, particularly for emerging nonfullerene organic solar cells. In this work, the influence of F4‐TCNQ on the blend film morphology and photovoltaic performance of nonfullerene solar cells processed by a single halogen‐free solvent is systematically investigated using a set of morphological and electrical characterizations. In solar cells with a high‐performance polymer:small molecule blend FTAZ:IT‐M, F4‐TCNQ has a negligibly small effect on the molecular packing and surface characteristics, while it clearly affects the electronic properties and mean‐square composition variation of the bulk. In comparison to the control devices with an average power conversion efficiency (PCE) of 11.8%, inclusion of a trace amount of F4‐TCNQ in the active layer has improved device fill factor and current density, which has resulted into a PCE of 12.4%. Further increase in F4‐TCNQ content degrades device performance. This investigation aims at delineating the precise role of F4‐TCNQ in nonfullerene bulk heterojunction films, and thereby establishing a facile approach to fabricate highly optimized nonfullerene solar cells.     

Molecular Orientation Unified Nonfullerene Acceptor Enabling 14% Efficiency As‐Cast Organic Solar Cells

Molecular orientation and π–π stacking of nonfullerene acceptors (NFAs) determine its domain size and purity in bulk‐heterojunction blends with a polymer donor. Two novel NFAs featuring an indacenobis(dithieno[3,2‐b:2?,3?‐d]pyrrol) core with meta‐ or para‐alkoxyphenyl sidechains are designed and denoted as m‐INPOIC or p‐INPOIC , respectively. The impact of the alkoxyl group positioning on molecular orientation and photovoltaic performance of NFAs is revealed through a comparison study with the counterpart ( INPIC‐4F ) bearing para‐alkylphenyl sidechains. With inward constriction toward the conjugated backbone, m‐INPOIC presents predominant face‐on orientation to promote charge transport. The as‐cast organic solar cells (OSCs) by blending m‐INPOIC and PBDB‐T as active layers exhibit a power conversion efficiency (PCE) of 12.1%. By introducing PC₇₁BM as the solid processing‐aid, the ternary OSCs are further optimized to deliver an impressive PCE of 14.0%, which is among the highest PCEs for as‐cast single‐junction OSCs reported in literature to date. More attractively, PBDB‐T: m‐INPOIC :PC₇₁BM based OSCs exhibit over 11% PCEs even with an active layer thickness over 300 nm. And the devices can retain over 95% of PCE after storage for 20 days. The outstanding tolerance to film thickness and outstanding stability of the as‐cast devices make m‐INPOIC a promising candidate NFA for large‐scale solution‐processable OSCs.     

Near‐Infrared Small Molecule Acceptor Enabled High‐Performance Nonfullerene Polymer Solar Cells with Over 13% Efficiency

One of the most promising approaches to achieve high‐performance polymer solar cells (PSCs) is to develop nonfullerene small molecule acceptors (SMAs) with an absorption extending to the near‐infrared (NIR) region. In this work, two novel SMAs, namely, BTTIC and BTOIC, are designed and synthesized, with optical bandgaps (E_g^opt) of 1.47 and 1.39 eV, respectively. Desipte the narrow E_g^opt, the PBDB‐T:BTTIC‐ and PBDB‐T:BTOIC‐based PSCs can maintain high V_OCs of over 0.90 and 0.86 V, respectively, with low energy losses (E_loss) < 0.6 eV. Meanwhile, due to the favorable morphology of the PBDB‐T:BTTIC blend, balanced carrier mobilities are achieved. The high external quantum efficiencies enable a high power conversion efficiency (PCE) up to 13.18% for the PBDB‐T:BTTIC‐based PSCs. In comparison, BTOIC shows an excessive crystallization propensity owing to its oxyalkyl side groups, which eventually leads to a relatively low PCE for the PBDB‐T:BTOIC‐based PSCs. Overall, this work provides insights into the design of novel NIR‐absorbing SMAs for nonfullerene PSCs.     

Conformation Locking on Fused‐Ring Electron Acceptor for High‐Performance Nonfullerene Organic Solar Cells

In this work, sidechain engineering on conjugated fused‐ring acceptors for conformation locking is demonstrated as an effective molecular design strategy for high‐performance nonfullerene organic solar cells (OSCs). A novel nonfullerene acceptor (ITC6‐IC) is designed and developed by introducing long alkyl chains into the terminal electron‐donating building blocks. ITC6‐IC has achieved definite conformation with a planar structure and better solubility in common organic solvents. The weak electron‐donating hexyl upshifts the lowest unoccupied molecular orbital level of ITC6‐IC, resulting in a higher V_OC in comparison to the widely used ITIC. The OSCs based on PBDB‐T:ITC6‐IC reveal a promising power conversion efficiency of 11.61% and an expected high V_OC of 0.97 V. The weaker π–π stacking induced by steric hindrance affords ITC6‐IC with enhanced compatibility with polymer donors. The blend film treated with suitable thermal annealing exhibits a fibril crystallization feature with a good bicontinuous network morphology. The results indicate that the molecular design approach of ITC6‐IC can be inspirational for future development of nonfullerene acceptors for high efficiency OSCs.     

A Novel Wide‐Bandgap Polymer with Deep Ionization Potential Enables Exceeding 16% Efficiency in Ternary Nonfullerene Polymer Solar Cells

Ternary strategies have attracted extensive attention due to their potential in improving power conversion efficiencies (PCEs) of single‐junction polymer solar cells (PSCs). In this work, a novel wide bandgap polymer donor (E_g^opt ≈ 2.0 eV) named PBT(E)BTz with a deep highest occupied molecular orbital (HOMO) level (≈?5.73 eV) is designed and synthesized. PBT(E)BTz is first incorporated as the third component into the classic PBDB‐T‐SF:IT‐4F binary PSC system to fabricate efficient ternary PSCs. A higher PCE of 13.19% is achieved in the ternary PSCs with a 5% addition of PBT(E)BTz over binary PSCs (12.14%). Similarly, addition of PBT(E)BTz improves the PCE for PBDB‐T:IT‐M binary PSCs from 10.50% to 11.06%. The study shows that the improved PCE in ternary PSCs is mainly attributed to the suppressed charge carrier recombination and more balanced charge transport. The generality of PBT(E)BTz as a third component is further evidenced in another efficient binary PSC system—PBDB‐TF:BTP‐4Cl: an optimized PCE of 16.26% is realized in the ternary devices. This work shows that PBT(E)BTz possessing a deep HOMO level as an additional component is an effective ternary PSC construction strategy toward enhancing device performance. Furthermore, the ternary device with 5% PBT(E)BTz displays better thermal and light stability over binary devices.     

Effects of Nonradiative Losses at Charge Transfer States and Energetic Disorder on the Open‐Circuit Voltage in Nonfullerene Organic Solar Cells

The considerable improvement on the power conversion efficiency (PCE) for emerging nonfullerene polymer solar cells is still limited by considerable voltage losses that have become one of the most significant obstacles in further boosting desired photovoltaic performance. Here, a comprehensive study is reported to understand the impacts of charge transport, energetic disorder, and charge transfer states (CTS) on the losses in open‐circuit voltage (V_oc) based on three high performing bulk heterojunction solar cells with the best PCE exceeding 11%. It is found that the champion poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene)‐co‐(1,3‐di(5‐thiophene‐2‐yl)‐5,7‐bis(2‐ethylhexyl)‐benzo[1,2‐c:4,5‐c′]dithiophene‐4,8‐dione))] (PBDB‐T):IT‐M solar cell (PCE = 11.5%) is associated with the least disorder. The determined energetic disorder in part reconciles the difference in V_oc between the solar cells. A reduction is observed in the nonradiative losses (ΔV_nonrad) coupled with the increase of energy of CTS for the PBDB‐T:IT‐M device, which may be related to the improved balance in carrier mobilities, and partially can explain the gain in V_oc. The determined radiative limit for V_oc combined with the ΔV_nonrad generates an excellent agreement for the V_oc with the experimental values. The results suggest that minimizing the energetic disorder related to transport and CTS is critical for the mitigation of V_oc losses and improvements on the device performance.     

Separating Crystallization Process of P3HT and O‐IDTBR to Construct Highly Crystalline Interpenetrating Network with Optimized Vertical Phase Separation

The morphology with the interpenetrating network and optimized vertical phase separation plays a key role in determining the charge transport and collection in polymer:nonfullerene small molecular acceptors (SMAs) solar cells. However, the crystallization of polymer and SMAs usually occurs simultaneously during film‐forming, thus interfering with the crystallization process of each other, leading to amorphous film with undesirable lateral and vertical phase separation. The poly(3‐hexylthiophene) (P3HT):O‐IDTBR blend is selected as a model system, and controlling film‐forming kinetics to solve these problems is proposed. Herein, a cosolvent 1,2,4‐triclorobenzene (TCB) with selective solubility and a high boiling point is added to the solution, leading to prior crystallization of P3HT and extended film‐forming duration. As a result, the crystallinity of both components is enhanced significantly. Meanwhile, the prior crystallization of P3HT induces solid–liquid phase separation, hence rationalizing the formation of the nano‐interpenetrating network. Moreover, the surface energy drives O‐IDTBR to enrich near the cathode and P3HT to migrate to the anode. Consequently, a highly crystalline nano‐interpenetrating network with proper vertical phase separation is obtained. The optimal morphology improves charge transport and suppresses bimolecular recombination, boosting the power conversion efficiency from 4.45% to 7.18%, which is the highest performance in P3HT‐based binary nonfullerene solar cells.     

Subtle Polymer Donor and Molecular Acceptor Design Enable Efficient Polymer Solar Cells with a Very Small Energy Loss

A new wide bandgap polymer donor, PNDT‐ST, based on naphtho[2,3‐b:6,7‐b′]dithiophene (NDT) and 1,3‐bis(thiophen‐2‐yl)‐5,7‐bis(2‐ ethylhexyl)benzo[1,2‐c:4,5‐c′]dithiophene‐4,8‐dione (BDD) is developed for efficient nonfullerene polymer solar cells. To better match the energy levels, a new near infrared small molecule of Y6‐T is also developed. The extended π‐conjugation and less twist of PNDT‐ST provides it with higher crystallinity and stronger aggregation than the PBDT‐ST counterpart. The higher lowest occupied molecular orbital level of Y6‐T than Y6 favors the better energy level match with these polymers, resulting in improved open circuit voltage (V_oc) and power conversion efficiency (PCE). The high crystallinity and strong aggregation of PNDT‐ST also induces large phase separation with poorer morphology, leading to lower fill factor and reduced PCE than PBDT‐ST. To mediate the crystallinity and optimize the morphology, PNDT‐ST and PBDT‐ST are blended together with Y6‐T, forming the ternary blend devices. As expected, the two compatible polymers allow continual optimization of the morphology by varying the blend ratio. The optimized ternary blend devices deliver a champion PCE as high as 16.57% with a very small energy loss (E_loss) of 0.521 eV. Such small E_loss is the best record for polymer solar cells with PCEs over 16% to date.     

Unconjugated Side‐Chain Engineering Enables Small Molecular Acceptors for Highly Efficient Non‐Fullerene Organic Solar Cells: Insights into the Fine‐Tuning of Acceptor Properties and Micromorphology

2D conjugated side‐chain engineering is an effective strategy that is widely utilized to construct benzodithiophene‐based polymers. Herein, an unconjugated side‐chain strategy to design fused‐benzodithiophene‐based non‐fullerene small molecule acceptors (SMAs) via vertical aromatic side‐chain engineering on the ladder‐type core is employed. Three SMAs named BTTIC‐Th, BTTIC‐TT, and BTTIC‐Ph with thiophene, thieno[3,2‐b]thiophene, and benzene, respectively, as side chains, are designed and synthesized. Three SMAs exhibit similar absorption ranges but different lowest unoccupied molecular orbital (LUMO) energy levels due to the different strength of the δ‐inductive effect between vertical aromatic side chains and their electron‐rich core. Organic solar cells based on PBDB‐T:BTTIC‐TT achieve a power conversion efficiency (PCE) of 13.44%, which is higher than the PCE of devices based on PBDB‐T:BTTIC‐Th (12.91%) and PBDB‐T:BTTIC‐Ph (9.14%). The difference in device performance is investigated by electrical and morphological characterizations. A large domain size and different types of π–π stacking are found in the bulk heterojunction layer of PBDB‐T:BTTIC‐Ph blend film, which are detrimental to exciton dissociation and charge transport. Overall, it is demonstrated that when designing unconjugated side chains, thieno[3,2‐b]thiophene is superior to thiophene and benzene through its dual roles of promoting the LUMO energy level and optimizing the morphology. These results shed light on the side‐chain engineering of high‐performance non‐fullerene SMAs.     

Anthracene-Assisted Morphology Optimization in Photoactive Layer for High-Efficiency Polymer Solar Cells

Currently, morphology optimization methods for the fused-ring nonfullerene acceptor-based polymer solar cells (PSCs) empirically follow the treatments originally developed in fullerene-based systems, being unable to meet the diverse molecular structures and strong crystallinity of the nonfullerene acceptors. Herein, a new and universal morphology controlling method is developed by applying volatilizable anthracene as solid additive. The strong crystallinity of anthracene offers the possibility to restrict the over aggregation of fused-ring nonfullerene acceptor in the process of film formation. During the kinetic process of anthracene removal in the blend under thermal annealing, donor can imbed into the remaining space of anthracene in the acceptor matrix to form well-developed nanoscale phase separation with bi-continuous interpenetrating networks. Consequently, the treatment of anthracene additive enables the power conversion efficiency (PCE) of PM6:Y6-based devices to 17.02%, which is a significant improvement with regard to the PCE of 15.60% for the reference device using conventional treatments. Moreover, this morphology controlling method exhibits general application in various active layer systems to achieve better photovoltaic performance. Particularly, a remarkable PCE of 17.51% is achieved in the ternary PTQ10:Y6:PC₇₁BM-based PSCs processed by anthracene additive. The morphology optimization strategy established in this work can offer unprecedented opportunities to build state-of-the-art PSCs.     

Perylene Diimide‐Based Nonfullerene Polymer Solar Cells with over 11% Efficiency Fabricated by Smart Molecular Design and Supramolecular Morphology Optimization

A series of perylene diimide (PDI) derivatives, TPP‐PDI , TPO‐PDI , and TPS‐PDI , are developed for nonfullerene polymer solar cells (NF‐PSCs) by flaking three PDI skeletons around 3D central cores with different configurations and electronic states, such as triphenylphosphine (TPP), triphenylphosphine monoxide (TPO), and triphenylphosphine sulfide (TPS). These small‐molecule acceptors have a “three‐wing propeller” structure due to their similar backbones. By changing the electron density of phosphorus atoms through oxidation and sulfuration, the “folding‐back” strength is decreased, resulting in a less twisted molecular conformation. The stronger electron‐withdrawing ability of the oxygen atom affords TPO‐PDI the least twisted conformation, which enhances the crystallinity of this complex. NF‐PSCs based on PTTEA : TPO‐PDI exhibit a high power conversion efficiency (PCE) of 8.65%. Ultimately, the joint “molecular lock” effect arising from O? H???F and O? H???O?P supramolecular interactions is achieved by introducing 4,4′‐biphenol as an additive, which successfully promotes fibril‐like phase separation and blend morphology optimization to generate the highest PCE of 11.01%, which is currently the highest value recorded for NF‐PSCs based on PDI acceptors.     

Fullerene‐Free Polymer Solar Cells with Open‐Circuit Voltage above 1.2 V: Tuning Phase Separation Behavior with Oligomer to Replace Polymer Acceptor

This study has proposed to use a well‐defined oligomer F4TBT4 to replace its analogue polymer as electron acceptor toward tuning the phase separation behavior and enhancing the photovoltaic performance of all‐polymer solar cells. It has been disclosed that the oligomer acceptor favors to construct pure and large‐scale phase separation in the polymer:oligomer blend film in contrast to the polymer:polymer blend film. This gets benefit from the well‐defined structure and short rigid conformation of the oligomer that endows it aggregation capability and avoids possible entanglement with the polymer donor chains. The charge recombination is to some extent suppressed and charge extraction is also improved. Finally, the P3HT:F4TBT4 solar cells not only output a high V_OC above 1.2 V, but also achieve a power conversion efficiency of 4.12%, which is two times higher than the P3HT:PFTBT solar cells and is comparable to the P3HT:PCBM solar cells. The strategy of constructing optimum phase separation with oligomer to replace polymer opens up new prospect for the further improvement of the all‐polymer solar cells.     

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

The ternary structure that combines fullerene and nonfullerene acceptors in a photoactive layer is demonstrated as an effective approach for boosting the power conversion efficiencies (PCEs) of organic solar cells (OSCs). Here, highly efficient ternary OSCs comprising a wide‐bandgap polymer donor (PBT1‐C), a narrow‐bandgap nonfullerene acceptor (IT‐2F), and a typical fullerene derivative (PC₇₁BM) are reported. It is found that the addition of PC₇₁BM into the PBT1‐C:IT‐2F blend not only increases the device efficiency up to 12.2%, but also improves the ambient stability of the OSCs. Detailed investigations indicate that the improvement in photovoltaic performance benefits from synergistic effects of increased photon‐harvesting, enhanced charge separation and transport, suppressed trap‐assisted recombination, and optimized film morphology. Moreover, it is noticed that such a ternary system exhibits excellent tolerance to the PC₇₁BM component, for which PCEs over 11.2% can be maintained throughout the whole blend ratios, higher than that (11.0%) of PBT1‐C:IT‐2F binary reference device.     

Fluorinated and Alkylthiolated Polymeric Donors Enable both Efficient Fullerene and Nonfullerene Polymer Solar Cells

In this work, four donor (D)–acceptor (A) copolymers based on benzodithiophene (BDT) and benzothiadiazole (BT) with different alkylthiolated and/or fluorinated side chains are developed for efficient fullerene and nonfullerene polymer solar cells (PSCs). The synergistic effect of sulfuration and fluorination on the optical absorption, energy level, crystallinity, carrier mobility, blend morphology, and photovoltaic performance is investigated systematically. By incorporating sulfur atoms onto the side chains, a little blueshifted but significantly increased absorption can be obtained for PBDTS‐FBT compared to PBDT‐FBT . On the other side, a little more blueshifted but much stronger absorption and much lower‐lying highest occupied molecular orbital (HOMO) level can be realized for PBDTF‐FBT when introducing fluorine atoms instead of sulfur atoms. With the combination of both fluorination and sulfuration strategies, PBDTS‐FBT exhibits the best absorption ability, lowest HOMO energy level, and highest crystallinity, which make PBDTSF‐FBT devices show the highest power conversion efficiency (PCE) of 10.69% in fullerene PSCs and 11.66% in nonfullerene PSCs. The PCE of 11.66% is the best value for PSCs based on BT‐containing copolymer donors reported so far. The results indicate that fluorination and sulfuration have a synergistically positive effect on the performance of D–A photovoltaic copolymers and their solar cell devices.     

Small-molecule acceptors with long alkyl chains for high-performance as-cast nonfullerene organic solar cells

Three fused-ring small-molecule electron acceptors, IDTC16-IC, IDTC16-Th, and IDTC16-4F, were designed and synthesized by introducing indacenodithiophene (IDT) as the electron-donating core and 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC), fluorinated IC, and a thiophene-based unit as the electron-withdrawing end group. Here, instead of the commonly used n-hexyl or n-hexylphenyl side chains, n-hexadecyl peripheral substituents were employed at the IDT core to study the influence of alkyl groups on photovoltaic performance of the nonfullerene acceptors. The introduction of flexible n-hexadecyl group endowed the three acceptors with excellent solubility in common organic solvents. All the three acceptors presented strong absorption ranging from 450 nm to 720 nm in solution with high molar extinction coefficients. As a result, the as-cast organic solar cells (OSCs) based on IDTC16-IC and the wide bandgap polymer donor PM6 exhibited a power conversion efficiency (PCE) of 5.12%. The OSCs based on PM6:IDTC16-Th and PM6:IDTC16-4F showed much better photovoltaic performance with PCEs of 8.76% and 8.55%, respectively. The PCE values were improved to 5.89%, 9.09%, and 9.42% for the PM6:IDTC16-IC, PM6:IDTC16-Th, and PM6:IDTC16-4F OSCs, respectively, with the addition of the solvent additive 1,8-diiodooctane. These findings demonstrate that the combination of alkyl chains at the fused rings and fluorination or aromatic structure change of the terminal groups leads to greatly enhanced photovoltaic performance of nonfullerene acceptors through improving the photophysical, molecular orbital, and film morphological properties.     

Over 15% Efficiency Polymer Solar Cells Enabled by Conformation Tuning of Newly Designed Asymmetric Small‐Molecule Acceptors

The prosperous period of polymer solar cells (PSCs) has witnessed great progress in molecule design methods to promote power conversion efficiency (PCE). Designing asymmetric structures has been proved effective in tuning energy level and morphology, which has drawn strong attention from the PSC community. Two hepta‐ring and octa‐ring asymmetric small molecular acceptors (SMAs) (IDTP‐4F and IDTTP‐4F) with S‐shape and C‐shape confirmations are developed to study the relationship between conformation shapes and PSC efficiencies. The similarity of absorption and energy levels between two SMAs makes the conformation a single variable. Additionally, three wide‐bandgap polymer donors (PM6, S1, and PM7) are chosen to prove the universality of the relationship between conformation and photovoltaic performance. Consequently, the champion PCE afforded by PM7: IDTP‐4F is as high as 15.2% while that of PM7: IDTTP‐4F is 13.8%. Moreover, the S‐shape IDTP‐4F performs obviously better than their IDTTP‐4F counterparts in PSCs regardless of the polymer donors, which confirms that S‐shape conformation performs better than the C‐shape one. This work provides an insight into how conformations of asymmetric SMAs affect PCEs, specific functions of utilizing different polymer donors to finely tune the active‐layer morphology and another possibility to reach an excellent PCE over 15%.     

An Electron Acceptor with Broad Visible–NIR Absorption and Unique Solid State Packing for As‐Cast High Performance Binary Organic Solar Cells

A novel acceptor–donor–acceptor (A–D–A) type electron acceptor 6TIC‐4F with terthieno[3,2‐b]thiophene (6T) as the core unit is rationally designed and synthesized, which exhibits an extraordinarily narrow bandgap (≈1.24 eV) and strong absorption between 650 and 1000 nm. X‐ray crystallographic analysis reveals that it has unique intermolecular π–π stacking. The solar cells based on the as‐cast poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′]dithiophene‐4,8‐dione))]) (PBDB‐T): 6TIC‐4F binary blends exhibit an excellent power conversion efficiency (PCE) of 11.14% with a high J_SC of 23.00 mA cm^?2, and a high fill factor of 0.67, which represents one of the best PCE values for low bandgap (E_g < 1.3 eV)–based organic solar cells.     

An Effective Method for Recovering Nonradiative Recombination Loss in Scalable Organic Solar Cells

Regarded as a critical step in commercial applications, scalable printing technology has become a research frontier in the field of organic solar cells. However, inevitable efficiency loss always occurs in the lab‐to‐manufacturing translation due to the different fabrication processes. In fact, the decline of photovoltaic performance is mainly related to voltage loss, which is mainly affected by the diversity of phase separation morphology and the chemical structures of photoactive materials. Fullerene derivative indene‐C₆₀ bisadduct (ICBA) is introduced into a PBDB‐T‐2F:IT‐4F system to control the active layer morphology during blade‐coating process. Accordingly, as a symmetrical fullerene derivative, ICBA can regulate the crystallization tendency and molecular packing orientation and suppress charge carrier recombination. This ternary strategy overcomes the morphology issues caused by weaker shear impulse in blade‐coating process. Benefiting from the reduced nonradiative recombination loss, 1.05 cm² devices are fabricated by blade coating with a power conversion efficiency of 13.70%. This approach provides an effective support for recovering the voltage loss during scalable printing approaches.     

Efficient Quaternary Organic Solar Cells with Parallel‐Alloy Morphology

Two compatible donors (PBDB‐T and PTB7‐Th) and two miscible acceptors (ITIC and FOIC) are employed to deliver a parallel‐alloy morphology model in non‐fullerene‐based quaternary organic solar cells. PBDB‐T and PTB7‐Th form a parallel link with a slight adjustment of molecular packing into enhanced face‐on crystallites while ITIC disperses into discontinuous FOIC microcrystal regions to form continuous and ordered alloy‐like acceptor phases. Characterization of blend morphology highlights the parallel‐alloy model—enabled by the introduction of PBDB‐T and ITIC, which contributes to improved molecular packing and reduced domain size resulting in efficient charge generation and consistent transport channels. This successful parallel‐alloy quaternary blend morphology demonstrates an enhanced optical absorption, optimized domain size, and nanostructures toward simultaneous improvement in charge transfer and transport. Therefore, a power conversion efficiency of 12.52% is realized for a quaternary device which is 6% higher than the ternary device (PBDB‐T:PTB7‐Th:FOIC) and 12% higher than the binary device (PTB7‐Th:FOIC). Domination of quaternary devices over ternary and binary blends, which is another feasible way to realize highly efficient devices through further investigation of quaternary OSCs, is presented.     

Ternary Blend Strategy for Achieving High‐Efficiency Organic Solar Cells with Nonfullerene Acceptors Involved

Nonfullerene acceptors have recently drawn considerable attention in bulk heterojunction organic solar cells (OSCs). The power conversion efficiency (PCE) over 14% is achieved in single‐junction fullerene‐free OSCs, which has surpassed that of fullerene‐based counterparts. For future commercial applications, however, a high and stable PCE > 15% is required, which entails rational material design and device optimization. In this context, three approaches are generally utilized—the synthesis of novel nonfullerene acceptors and the selection of suitable polymer donors to pair with them, the tandem or multijunction device architecture, and the ternary blend strategy. Compared to the former two methods, the ternary strategy allows to employ the existing photovoltaic materials and the single‐junction device. Therefore, an exploration of nonfullerene acceptor–based ternary blend OSCs (NFTSCs) has shown unprecedented progress since 2016. This review summarizes and classifies the photovoltaic materials utilized in NFTSCs, aiming to not only exhibit the recent development of NFTSCs but also elucidate the correlation among donor/acceptor materials, film morphology, transport dynamics, and device fabrication toward high‐efficiency OSCs. Lastly, the above key advances are highlighted along with the existing issues and insights into the viable path for the further research thrusts are offered.