Imaging and Measuring the Molecular Force of Lymphoma Pathological Cells Using Atomic Force Microscopy

Atomic force microscopy (AFM) provides a new technology to visualize the cellular topography and quantify the molecular interactions at nanometer spatial resolution. In this work, AFM was used to image the cellular topography and measure the molecular force of pathological cells from B‐cell lymphoma patients. After the fluorescence staining, cancer cells were recognized by their special morphological features and then the detailed topography was visualized by AFM imaging. The AFM images showed that cancer cells were much rougher than healthy cells. CD20 is a surface marker of B cells and rituximab is a monoclonal antibody against CD20. To measure the CD20‐rituximab interaction forces, the polyethylene glycol (PEG) linker was used to link rituximab onto the AFM tip and the verification experiments of the functionalized probe indicated that rituximab molecules were successfully linked onto the AFM tip. The CD20‐rituximab interaction forces were measured on about 20 pathological cells and the force measurement results indicated the CD20‐rituximab binding forces were mainly in the range of 110–120 pN and 130–140 pN. These results can improve our understanding of the topography and molecular force of lymphoma pathological cells. SCANNING 35:40‐46, 2013. © 2012 Wiley Periodicals, Inc.     

Atomic force microscopy imaging and 3-D reconstructions of serial thin sections of a single cell and its interior structures

The thin sectioning has been widely applied in electron microscopy (EM), and successfully used for an in situ observation of inner ultrastructure of cells. This powerful technique has recently been extended to the research field of atomic force microscopy (AFM). However, there have been no reports describing AFM imaging of serial thin sections and three-dimensional (3-D) reconstruction of cells and their inner structures. In the present study, we used AFM to scan serial thin sections approximately 60 nm thick of a mouse embryonic stem (ES) cell, and to observe the in situ inner ultrastructure including cell membrane, cytoplasm, mitochondria, nucleus membrane, and linear chromatin. The high-magnification AFM imaging of single mitochondria clearly demonstrated the outer membrane, inner boundary membrane and cristal membrane of mitochondria in the cellular compartment. Importantly, AFM imaging on six serial thin sections of a single mouse ES cell showed that mitochondria underwent sequential changes in the number, morphology and distribution. These nanoscale images allowed us to perform 3-D surface reconstruction of interested interior structures in cells. Based on the serial in situ images, 3-D models of morphological characteristics, numbers and distributions of interior structures of the single ES cells were validated and reconstructed. Our results suggest that the combined AFM and serial-thin-section technique is useful for the nanoscale imaging and 3-D reconstruction of single cells and their inner structures. This technique may facilitate studies of proliferating and differentiating stages of stem cells or somatic cells at a nanoscale.     

Morphology and expression status investigations of specific surface markers on B‐cell chronic lymphocytic leukemia cells

The morphology of cells and expression status of specific surface markers [cluster of differentiation (CD)], such as CD5, CD19, CD20, CD38, and CD45, have long been considered as the essential indicators for the diagnosis and prognosis of B‐cell chronic lymphocytic leukemia (B‐CLL). Clinically, it is difficult to simultaneously obtain cell morphology and distribution of surface markers with flow cytometry, especially for some surrogate markers such as CD38. Here, as an alternative and complementary prognostic method, fluorescence microscopy and image processing method are introduced to directly visualize the cells from patients and to quantitatively determine the expression status of surface markers. In this study, the morphological parameters of B‐CLL cells were measured to establish the correlation between the cellular morphology and the surface marker expression. It was clear that the CD38+ and CD38? B‐CLL cells from the same CD38+ patients had hardly any size differences; however, an increase in perimeter was observed for CD38? patients. Moreover, the expression level of the receptors on the cell was independent of the cell size. There was no evidence showing that the expression intensities of CD19 and CD38 were related to each other for the CD38+ B‐CLL cells. On the same cells, CD5 was more selectively expressed on the cell membrane; however, the expression patterns suggested that the cell membrane of CD38? B‐CLL cells contained the least expression level of CD19. Microsc. Res. Tech. 76:1147–1153, 2013. © 2013 Wiley Periodicals, Inc.     

Comparisons of the topographic characteristics and electrical charge distributions among Babesia‐infected erythrocytes and extraerythrocytic merozoites using AFM

Tick‐borne Babesia parasites are responsible for costly diseases worldwide. Improved control and prevention tools are urgently needed, but development of such tools is limited by numerous gaps in knowledge of the parasite–host relationships. We hereby used atomic force microscopy (AFM) and frequency‐modulated Kelvin probe potential microscopy (FM‐KPFM) techniques to compare size, texture, roughness and surface potential of normal and infected Babesia bovis, B. bigemina and B. caballi erythrocytes to better understand the physical properties of these parasites. In addition, AFM and FM‐KPFM allowed a detailed view of extraerythrocytic merozoites revealing shape, topography and surface potential of paired and single parasites. B. bovis‐infected erythrocytes display distinct surface texture and overall roughness compared to noninfected erythrocytes. Interestingly, B. caballi‐infected erythrocytes do not display the surface ridges typical in B. bovis parasites. Observations of extraerythrocytic B. bovis, B. bigemina and B. caballi merozoites using AFM revealed differences in size and shape between these three parasites. Finally, similar to what was previously observed for Plasmodium‐infected erythrocytes, FM‐KPFM images reveal an unequal electric charge distribution, with higher surface potential above the erythrocyte regions that are likely associated with Babesia parasites than over its remainder regions. In addition, the surface potential of paired extraerythrocytic B. bovis Mo7 merozoites revealed an asymmetric potential distribution. These observations may be important to better understand the unique cytoadhesive properties of B. bovis‐infected erythrocytes, and to speculate on the role of differences in the distribution of surface charges in the biology of the parasites.     

Investigation of integrin expression on the surface of osteoblast-like cells by atomic force microscopy

The transforming growth factor β1 (TGF-β1) is a human cytokine which has been demonstrated to modulate cell surface integrin repertoire. In this work integrin expression in response to TGF-β1 stimulation has been investigated on the surface of human osteoblast-like cells. We used atomic force microscopy (AFM) and confocal laser scanning microscopy to assess integrin expression and to evaluate their distribution over the dorsal side of the plasma membrane. AFM probes have been covalently functionalised with monoclonal antibodies specific to the β1 integrin subunit. Force curves have been collected in order to obtain maps of the interaction between the immobilized antibody and the respective cell membrane receptors. Adhesion peaks have been automatically detected by means of an ad hoc developed data analysis software. The specificity of the detected interactions has been assessed by adding free antibody in the solution and monitoring the dramatic decrease in the recorded interactions. In addition, the effect of TGF-β1 treatment on both the fluorescence signal and the adhesion events has been tested. The level of expression of the β1 integrin subunit was enhanced by TGF-β1. As a further analysis, the adhesion force of the single living cells to the substrate was measured by laterally pushing the cell with the AFM tip and measuring the force necessary to displace it. The treatment with TGF-β1 resulted in a decrease of the cell/substrate adhesion force. Results obtained by AFM have been validated by confocal laser scanning microscopy thus demonstrating the high potential of the AFM technique for the investigation of cell surface receptors distribution and trafficking at the nanoscale.     

Application of atomic force microscopy in bacterial research

The atomic force microscope (AFM) has evolved from an imaging device into a multifunctional and powerful toolkit for probing the nanostructures and surface components on the exterior of bacterial cells. Currently, the area of application spans a broad range of interesting fields from materials sciences, in which AFM has been used to deposit patterns of thiol‐functionalized molecules onto gold substrates, to biological sciences, in which AFM has been employed to study the undesirable bacterial adhesion to implants and catheters or the essential bacterial adhesion to contaminated soil or aquifers. The unique attribute of AFM is the ability to image bacterial surface features, to measure interaction forces of functionalized probes with these features, and to manipulate these features, for example, by measuring elongation forces under physiological conditions and at high lateral resolution (<1 Å). The first imaging studies showed the morphology of various biomolecules followed by rapid progress in visualizing whole bacterial cells. The AFM technique gradually developed into a lab‐on‐a‐tip allowing more quantitative analysis of bacterial samples in aqueous liquids and non‐contact modes. Recently, force spectroscopy modes, such as chemical force microscopy, single‐cell force spectroscopy, and single‐molecule force spectroscopy, have been used to map the spatial arrangement of chemical groups and electrical charges on bacterial surfaces, to measure cell–cell interactions, and to stretch biomolecules. In this review, we present the fascinating options offered by the rapid advances in AFM with emphasizes on bacterial research and provide a background for the exciting research articles to follow. SCANNING 32: 74–96, 2010. © 2010 Wiley Periodicals, Inc.     

人脐静脉内皮细胞形貌与表面粘附力的原子力显微镜表征

目的:探讨原子力显微镜(AFM)在研究人脐静脉内皮细胞(ECV304)表面形貌、超微结构及纳米机械性质等方面的应用,讨论ECV304超微结构和机械性质与其功能的关系。方法:利用AFM对ECV304细胞的表面形貌及生物机械性质进行表征与测量。结果:在AFM下观察到用普通光学显微镜难以观察到的ECV304细胞的独特的形态结构,如细胞骨架、伪足及细胞边缘微丝等。ECV304细胞呈现长梭形、多角形、圆形等多种形态,细胞表面平均粗糙度为320.52±75.98 nm,表面均匀分布微绒毛,细胞周围有铺展的圆盘状物质。力曲线定量分析得出针尖与细胞表面的非特异性粘附力为75±14 pN。结论:通过AFM成像和力曲线测量表明,ECV304细胞呈圆形,多角形,梭形等多种形态,针尖与细胞膜表面问的粘附力比较小,约75±14pN。     

Atomic force microscopy investigation of the dependence of cellular elastic moduli on glutaraldehyde fixation

The atomic force microscope (AFM) has provided nanoscale analyses of surfaces of cells that exhibit strong adhesive and cell spreading properties. However, it is frequently reported that prior fixation is required for reliable imaging of cells with lower adhesive properties. In the present study, the AFM is used to assess the effects of fixation by glutaraldehyde on the elastic modulus of a human rhabdomyosarcoma transfectant cell line RDX2C2. Our results show a sharp increase in the elastic modulus for even mild fixation (0.5% glutaraldehyde for 60 s), accompanied by a dramatic improvement in imaging reproducibility. An even larger increase is seen in NIH-3T3 mouse fibroblasts, although in that case fixation is not typically necessary for successful imaging. In addition, our results suggest that treatment with glutaraldehyde restricts the content of the resulting images to features nearer to the cell surface.     

Changes in the biomechanical properties of a single cell induced by nonthermal atmospheric pressure micro‐dielectric barrier discharge plasma

Mechanical properties of a single cell are closely related to the fate and functions of the cell. Changes in mechanical properties may cause diseases or cell apoptosis. Selective cytotoxic effects of nonthermal atmospheric pressure micro‐dielectric barrier discharge (DBD) plasma have been demonstrated on cancer cells. In this work, changes in the mechanical properties of a single cell induced by nonthermal atmospheric pressure micro‐DBD plasma were investigated using atomic force microscopy (AFM). Two cervical cancer cell lines (HeLa and SiHa) and normal human fibroblast cells (HFBs) were exposed to micro‐DBD plasma for various exposure times. The elasticity of a single cell was determined by force–distance curve measurement using AFM. Young's modulus was decreased by plasma treatment for all cells. The Young's modulus of plasma‐treated HeLa cells was decreased by 75% compared to nontreated HeLa cells. In SiHa cells and HFBs, elasticity was decreased slightly. Chemical changes induced by the plasma treatment, which were observed by Raman spectroscopy, were also significant in HeLa cells compared to SiHa cells and HFBs. These results suggested that the molecular changes induced by micro‐DBD plasma were related to cell mechanical changes.     

Mechanical properties of plasma membrane and nuclear envelope measured by scanning probe microscope

Atomic force microscopy has been used to visualize nano‐scale structures of various cellular components and to characterize mechanical properties of biomolecules. In spite of its ability to measure non‐fixed samples in liquid, the application of AFM for living cell manipulation has been hampered by the lack of knowledge of the mechanical properties of living cells. In this study, we successfully combine AFM imaging and force measurement to characterize the mechanical properties of the plasma membrane and the nuclear envelope of living HeLa cells in a culture medium. We examine cantilevers with different physical properties (spring constant, tip angle and length) to find out the one suitable for living cell imaging and manipulation. Our results of elasticity measurement revealed that both the plasma membrane and the nuclear envelope are soft enough to absorb a large deformation by the AFM probe. The penetrations of the plasma membrane and the nuclear envelope were possible when the probe indents the cell membranes far down close to a hard glass surface. These results provide useful information to the development of single‐cell manipulation techniques.     

Apoptosis Induction of K562 Cells by Lymphocytes: An AFM Study

Antitumor immunotherapies, as a prospective approach for local cancer treatment, are attracting increasing interests. To detect the reacting course of immune and tumor cells, we have observed the process of K562 cells (a human erythroleukemic cell line) coculturing with peripheral lymphocytes, and the morphological and ultrastructural alterations of K562 cells and lymphocytes were investigated as well using atomic force microscopy (AFM). AFM morphological imaging revealed that after coculture the apoptosis‐like structures such as blebbing, pores, and apoptotic bodies were observed on the K562 cells. Also, the cell‐surface roughness decreased significantly, which implied the changes in chemical composition of cell membranes. Moreover, the lymphocytes were damaged to some extent induced by the coculture. The data demonstrated that K562 cells could be attacked and induced apoptosis by lymphocytes, and they would make damages to lymphocytes to escape the surveillance of immune system. SCANNING 35:7‐11, 2013. © 2012 Wiley Periodicals, Inc.     

Synthesis and morphological characterization of block copolymers for improved biomaterials

Biocompatible polymers are known to act as scaffolds for the regeneration and growth of bone. Block copolymers are of interest as scaffold materials because a number of the blocks are biocompatible, and their nanostructure is easily tunable with synthetic techniques. In this paper, we report the synthesis of a novel class of biomaterials from block copolymers containing a hydrophobic block of methyl methacrylate and a hydrophilic block of either acrylic acid, dimethyl acrylamide, or 2-hydroxyethyl methacrylate. The block copolymers were synthesized using a combination of reversible addition–fragmentation chain transfer (RAFT) polymerization and click chemistry. Since the surface morphology is critical for successful cell growth, atomic force microscopy (AFM) studies were conducted for selected block copolymers. The topography, phase angle and friction maps were obtained in dry and physiological buffer environments to study the morphology. Results of AFM imaging identified the presence of polymer domains corresponding to the copolymer components. The distribution of nanoscale features in these block copolymers is comparable to those found on other surfaces that exhibit favorable cell adhesion and growth. In physiological buffer medium, the hydrophilic component of the block copolymer (acrylic acid or hydroxyethyl methacrylate) appears to be present in greater amounts on the surface as a consequence of water absorption and swelling.     

AFM studied the effect of celastrol on β1 integrin‐mediated HUVEC adhesion and migration

Integrin‐mediated human umbilical vein endothelial cells (HUVECs) adhesion to the extracellular matrix plays a fundamental role in tumor‐induced angiogenesis. Celastrol, a traditional Chinese medicine plant, has possessed anticancer and suppressed angiogenesis activities. Here, the mechanism underling the antiangiogenesis capacity of celastrol was investigated by exploring the effect of celastrol on β1(CD29) integrin‐mediated cell adhesion and migration. Flow cytometry results showed that the HUVECs highly expressed CD29 and cell adhesion assay indicated that celastrol specifically inhibited the adhesion of HUVECs to fibronectin (FN) without affecting nonspecific adhesion to poly‐L‐lysine (PLL). After cell FN adhesion being inhibited, the cell surface nanoscale structure and adhesion force were detected by atomic force microscope (AFM). High‐resolution imaging revealed that cell morphology and ultrastructure changed a lot after being treated with celastrol. The membrane average roughness (Ra) and the major forces were decreased from 31.34 ± 4.56 nm, 519.60 ± 82.86 pN of 0 μg/ml celastrol to 18.47 ± 6.53 nm, 417.79 ± 53.35 pN of 4.0 μg/ml celastrol, 10.54 ± 2.85 nm, 258.95 ± 38.98 pN of 8.0 μg/ml celastrol, respectively. Accompanying with the decrease of adhesion force, the actin cytoskeleton in the cells was obviously disturbed by the celastrol. All of these changes influenced the migration of HUVECs from the wound‐healing migration assay. Taken together, our results suggest that celastrol can be as an inhibitor of HUVEC adhesion to FN. This work provides a novel approach to inhibition of tumor angiogenesis and tumor growth. SCANNING 35:316‐326, 2013. © 2012 Wiley Periodicals, Inc.     

Artesunate induced morphological and mechanical changes of Jurkat cell studied by AFM

In this study, we have used atomic force microscopy (AFM) to study the morphology and mechanical property changes of Jurkat cells exposed to different concentrations of Artesunate (ART) for 24 h at single cellular level. Cell viability and proliferation assays were performed by using the Cell Counting Kit‐8. The concentration of ART, which resulted in the inhibition rate >50% was selected. The AFM images revealed that the cell membrane changed and the ultrastructure also became complex. Mechanical properties of individual cell were tracked with AFM‐based force spectroscopy. The force curves revealed that when a cell was exposed to the ART, the mechanical properties changed obviously. Treated cells had a lower adhesion force of 416.8±37.9 pN, whereas control group had a higher adhesion force of 1064.2±97.0 pN. The Young's modulus decreased to nearly one‐third, from control group of 0.648±0.037 kPa to treated group of 0.254±0.035 kPa and the stiffness increased to nearly 1.5 times, from control group of 1.231±0.084 mN/m to treated group of 1.917±0.137 mN/m. These results suggest that ART can inhibit the proliferation of Jurkat and induce changes in the morphological structure and mechanical properties of Jurkat cells. The high resolution and high sensitivity of AFM can be used to detect morphological and mechanical properties of cells exposed to ART. The AFM may be developed to be a useful tool for detecting the cell death and evaluating the anti‐carcinogen efficacy against tumor cell. SCANNING 31: 83–89, 2009. © 2009 Wiley Periodicals, Inc.     

Immobilisation of living bacteria for AFM imaging under physiological conditions

Atomic force microscopy (AFM) holds great potential for studying the nanoscale surface structures of living cells, and to measure their interactions with abiotic surfaces, other cells, or specific biomolecules. However, the application of AFM in microbiology is challenging due to the difficulty of immobilising bacterial cells to a flat surface without changing the cell surface properties or cell viability. We have performed an extensive and thorough study of how to functionalise surfaces in order to immobilise living bacteria for AFM studies in liquid environments. Our aim was to develop a scheme which allows bacterial cells to be immobilised to a flat surface with sufficient strength to avoid detachment during the AFM scanning, and without affecting cell surface chemistry, structure, and viability. We compare and evaluate published methods, and present a new, reproducible, and generally applicable scheme for immobilising bacteria cells for an AFM imaging.     

Investigation of nanostructural changes following acute injury using atomic force microscopy in rabbit vocal folds

There continues to be a paucity of data regarding the nanostructural changes of vocal fold (VF) collagen after injury. The aim of this study is to investigate the nanostructural and morphological changes in the rabbit VF lamina propria following acute injury using atomic force microscopy (AFM). Unilateral VF injury was performed on 9 New Zealand breeder rabbits. Sacrifice and laryngeal harvest were performed at three time points: 1 day, 3 days, and 7 days after injury. Histology and immunohistochemistry data were collected to confirm extracellular matrix (ECM) changes in rabbit VF. The progressive changes in thickness and D‐spacing of VF collagen fibrils were investigated over a 7‐day postinjury period using AFM. At post‐injury day 1, a fibrin clot and inflammatory cell infiltration were observed at the injured VF. The inflammatory score at postinjury day 1 was highest in injured VF tissue, with a significant decrease at postinjury day 7. The immunoreactivity of inflammatory proteins (COX‐2, TNF‐α) was observed in VF up to day 7 after injury. AFM investigation showed clustered and disorganized collagen fibrils at the nanoscale resolution at post‐injury day 7. Collagen fibrils in injured VF at postinjury day 7 were significantly thicker than control and postinjury days 1 and 3 (P < 0.001). D‐spacing of collagen at postinjury day 7 was not studied due to loss of distinct edges resulting from immature collagen deposition. AFM investigation of VF could add valuable information to understanding micromechanical changes in VF scar tissue. Microsc. Res. Tech. 78:569–576, 2015. © 2015 Wiley Periodicals, Inc.     

Multifractal characterization of morphology of human red blood cells membrane skeleton

The purpose of this paper is to show applicability of multifractal analysis in investigations of the morphological changes of ultra‐structures of red blood cells (RBCs) membrane skeleton measured using atomic force microscopy (AFM). Human RBCs obtained from healthy and hypertensive donors as well as healthy erythrocytes irradiated with neutrons (45 μGy) were studied. The membrane skeleton of the cells was imaged using AFM in a contact mode. Morphological characterization of the three‐dimensional RBC surfaces was realized by a multifractal method. The nanometre scale study of human RBCs surface morphology revealed a multifractal geometry. The generalized dimensions D_q and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of their membrane skeleton organization. Surface characterization was made using areal ISO 25178‐2: 2012 topography parameters in combination with AFM topography measurement. The surface structure of human RBCs is complex with hierarchical substructures resulting from the organization of the erythrocyte membrane skeleton. The analysed AFM images confirm a multifractal nature of the surface that could be useful in histology to quantify human RBC architectural changes associated with different disease states. In case of very precise measurements when the red cell surface is not wrinkled even very fine differences can be uncovered as was shown for the erythrocytes treated with a very low dose of ionizing radiation.     

QD as a bifunctional cell-surface marker for both fluorescence and atomic force microscopy

Fluorescent quantum dots (QDs) are a new class of fluorescent label and have been extensively used in cell imaging. Streptavidin-conjugated QDs have a diameter of ca. 10–15 nm; therefore when used as probes to label cell-surface biomolecules, they can provide contrast enhancement under atomic force microscopy (AFM) and allow specific proteins to be distinguished from the background. In addition, the size and fluorescent properties potentially make them as probes in correlative fluorescence microscopy (FM) and AFM. In this study, we tested the feasibility of using QD-streptavidin conjugates as probes to label wheat germ agglutinin (WGA) receptors on the membrane of human red blood cells (RBCs) and simultaneously obtain fluorescence and AFM images. The results show that the distribution of QDs labeled on human RBCs was non-uniform and that the number of labeled QDs on different erythrocytes varied significantly, which perhaps indicates different ages of the erythrocytes. Thus, QDs may be employed as bifunctional cell-surface markers for both FM and AFM to quantitatively investigate the distribution and expression of membrane proteins or receptors on cell surface.     

AFM detection of mitogen-induced morphological changes in human B lymphocyte

B‐lymphocyte activation plays an important role in humoral immune system, and its process has been studied well in vivo and in vitro. However, the ultrastructure and adhesion property changes remain unclear. In this study, changes in the morphology and mechanical properties of human peripheral blood B lymphocytes were first studied by atomic force microscopy (AFM). B lymphocytes were treated with the mitogen, pokeweed mitogen (PWM), and Staphylococcus aureus Cowan strain I (SAC) for 24 hr. After B lymphocyte is stimulated by the mitogen, the cell height, diameter, and volume are changed in different degree. The ultrastructure of the B lymphocytes membrane obviously displayed proteins gathering, corresponding with larger changes of average roughness and mean height of particles on cell membrane. Meanwhile, we detected the adhesion force of B lymphocytes after being stimulated by PWM and SAC. We found that the treated cells had a higher adhesion force of 304.16 ± 60.30 pN (PWM) and 249.63 ± 58.03 pN (SAC) than that of control group (104.28 ± 21.77 pN). Therefore, our results could provide new information to further understand the B‐lymphocyte activation process and their structure‐function analyses. SCANNING 34: 60–67, 2012. © 2011 Wiley Periodicals, Inc.     

Membrane deformation of living glial cells using atomic force microscopy

Using atomic force microscopy (AFM) it has been possible to detect actin filaments that are beneath the cell membrane of living cells despite the fact that the AFM tip is applied to the surface of the cell. To determine whether the AFM tip actually penetrates or deforms the cell membrane we determined whether an intracellularly trapped fluorescent indicator was lost from cells during AFM. Using epi-fluorescence illumination to monitor the presence of fluo-3 in the cell, we found that AFM did not cause dye leakage from the cell. Further, force–distance curves indicated that standard tips did not penetrate the membrane while sharper Supertips^TM did. In addition, the physiology of cells was found to be unaffected by AFM with standard tips since volume regulatory signal transduction mechanisms were intact in such studies. Thus, traditional AFM tips deform the cell membrane in order to reveal the presence of subcellular structures.