Acrylic acid/allyloxy polyethylene glycol copolymer with methoxysilicon end groups as a highly effective dispersant for nano-SiO2 aqueous system

In order to improve the dispersity and stability of nano-SiO₂ aqueous system with high solid content, acrylic acid/allyloxy polyethylene glycol copolymer dispersants with methoxysilicon end groups (KH590-AA_x-APEG_y) were synthesized by photopolymerization. After adding KH590-AA_x-APEG_y into the nano-SiO₂ aqueous system, the viscosity, the curing time, the particle size, and the zeta potential of these systems were respectively measured. The results showed that introducing polyethylene glycol chain into the dispersant was beneficial to better exerting its electrostatic repulsion and steric hindrance effects and further improving the dispersibility of the nano-SiO₂ aqueous system. Moreover, the dispersion stability of SiO₂ nanoparticles in water was closely related to the composition, the molecular weight, and the addition amount of KH590-AA_x-APEG_y and the solid content. When the molecular weight of KH590-AA_x-APEG_y was 3200 g mol⁻¹ and its addition amount was 0.1 wt %, the nano-SiO₂ aqueous system with 20 wt % solid content showed the best dispersity and stability. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48617.     

Poly(methacrylate)‐derived diblock dispersant for TiO2 in aqueous suspensions

In this paper, we propose a newly designed dispersant, ammonium poly(methacrylate)‐block‐poly(2‐phenoxyethyl acrylate) (PMA‐b‐PBEA), and our rheological and zeta potential test results verify its superior dispersion efficiency for aqueous suspensions in comparison to the commercial dispersant ammonium polyacrylate (PAA‐NH₄). The extremely high dispersion efficiency of PMA‐b‐PBEA correlates closely to its diblock structure, which simultaneously exhibits a less polar anchoring head group and a water‐dissociable stabilizing moiety. The unique structure of PMA‐b‐PBEA accounts for its high powder adsorption effectiveness, which is demonstrated in its adsorption capability being double that of PAA‐NH₄.     

Preparation of conductive polyaniline/nanosilica particle composites through ultrasonic irradiation

Polyaniline/nano‐SiO₂ particle composites were prepared through ultrasonic irradiation. Polymerization of aniline was conducted under ultrasonic irradiation in the presence of two types of nano‐SiO₂: porous nanosilica and spherical nanosilica. The stability of the colloid dispersion, UV–vis spectra, composition, interaction, conductivity, and other characteristics of the composites were examined. It was found that the aggregation of nano‐SiO₂ could be reduced under ultrasonic irradiation and that nanoparticles were redispersed in the aqueous solution. The formed polyaniline deposited on the surface of the nanoparticle, which led to a core–shell structure. Two particle morphologies, threadlike aggregates with a few spherical nanoparticles for porous nanosilica and spherical particles with a few sandwichlike particles for spherical nanosilica, were observed. X‐ray photoelectron spectroscopy showed that for two types of composites the ratio of Si atoms to N atoms (Si:N) on the surface was much higher than that in the bulk. The UV–vis spectra of the diluted colloid dispersion of polyaniline/nano‐SiO₂ composite particles were similar to those of the polyaniline system. Fourier transform infrared spectroscopy suggested strong interaction between polyaniline and nano‐SiO₂. The conductivity of the polyaniline/porous nanosilica (23.1 wt % polyaniline) and polyaniline/spherical nanosilica (20.6 wt % polyaniline) composites was 2.9 and 0.2 S/cm, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1811–1817, 2003     

Effect of amphoteric dispersant on the dispersion properties of nano‐SiO2 particles

An amphoteric polycarboxylate dispersant (APC) was synthesized by copolymerization of acrylic acid (AA), methacryloxyethyltrimethyl ammonium chloride (DMC), and isopentenol polyoxyethylene ether (IPEG). The molecular structure of APC was characterized by FT‐IR, ¹H‐NMR, and GPC. Effect of the dosage of APC on the rheological performance of nano‐SiO₂ suspension was investigated by measurements of the plastic viscosity. The results indicated that the best dispersion effect of APC was obtained when the dosage of APC was about 10 wt % (by the weight percent of nano‐SiO₂), which can maintain the dispersion of nano‐SiO₂ suspension uniformly for 4 h without settlement. Meanwhile, the zeta potential value on the surface of nano‐SiO₂ particles shows that the better dispersion performance of APC was attributed to the solvation water film formed by the polyoxyethylene side chains and the electrostatic repulsion formed by positively groups (C?N⁺) on the APC structure combined with ‐SiO^– groups on the surface of nano‐SiO₂ particles. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45075.     

Dispersion and Rheology of Aqueous Zirconium Diboride Nanosuspensions

The dispersion and rheology of aqueous ZrB₂ nanosuspensions were investigated by zeta potential measurements, particle size measurements, sedimentation tests, and rheology measurements, with poly (acrylic acid) (PAA) as dispersant. Results showed that the dispersion and rheology of nanosized ZrB₂ suspensions in aqueous media were dependent on pH value, PAA concentration, solid loading, and ball milling time. Concentrated (up to 30 vol% solid loading) and well‐stabilized aqueous ZrB₂ nanosuspension with low viscosity (0.485 Pa s at 60/s) was prepared at pH 10, with 1.0 wt% PAA.     

Effect of the mixing sequence on the morphology and properties of a polypropylene/polydimethylsiloxane/nano‐SiO2 ternary composite

Ternary composites of polypropylene (PP), polydimethylsiloxane (PDMS) elastomer, and nano‐SiO₂, prepared with three different mixing sequences, were studied for dispersion morphology and its effect on the crystallization of PP and the mechanical properties. The mixing sequence produced a significant effect on the dispersion morphology and, thereby, on the mechanical properties of the composites. A two‐step mixing sequence, in which nano‐SiO₂ was added in the second step to the PP/PDMS binary system, produced a significant encapsulation of nano‐SiO₂ by PDMS, and this, in turn, resulted in the poor modulus and impact strength of the composite. A one‐step mixing sequence of all three components produced a separated dispersion of PDMS and nano‐SiO₂ phases in the PP matrix with the occurrence of a fine band of nano‐SiO₂ particles at the boundaries of the PDMS domains and the presence of some nano‐SiO₂ filler particles inside the PDMS domains. This one‐step mixing sequence produced an improvement in the tensile modulus but a decrease in the impact strength with increasing nano‐SiO₂ content. In the third sequence of mixing, which involved a two‐step mixing sequence through the addition of PDMS in the second step to the previously prepared PP/nano‐SiO₂ binary system, the morphology of the dispersion showed separately dispersed PDMS and nano‐SiO₂ phases with a loose network of nano‐SiO₂ particles surrounding the PDMS domains. This latter series of ternary composites had the highest impact strength and exhibited high shear deformation under tensile and impact conditions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Morphology and properties of PET/PA‐6/SiO2 ternary composites

A kind of hydrophilic nano‐SiO₂ was applied to poly(ethylene terephthalate)/polyamide‐6 (PA‐6) blends. Melt‐blended composites were prepared at various component ratios and different nano‐SiO₂ levels. Mechanical, morphological, dynamic mechanical, and thermal tests were carried out to characterize the properties, morphology, and compatibilization of the composites. Increased impact strength, tensile strength, and modulus were observed by adding nano‐SiO₂ particles in the blends. The nano‐SiO₂ particles were found to be preferentially dispersed in PA‐6, resulting in an increase of glass transition temperature and crystallization of PA‐6. The mechanism of morphology and properties changes was discussed based on the selective dispersion of nano‐SiO₂ particles in the blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2288–2296, 2007     

Soy protein plastics reinforced and toughened by SiO2 nanoparticles

The nano‐SiO₂ particles were compounded into soy protein isolated (SPI) matrix to produce a series of reinforcing nanocomposite sheets by compression‐molding. Except for the expected increase of strength and modulus, the elongation was also enhanced when the nano‐SiO₂ content was lower than 8 wt %. Moreover, two nanocomposite materials were recommended: the one is a nanocomposite containing 4 wt % nano‐SiO₂ with the highest strength and enhanced elongation, the other is a reinforced material with the best elongation filled by 8 wt % nano‐SiO₂. The increase of nano‐SiO₂ content produced many kinds of distributions in SPI matrix, such as single nanosphere, ～ 100 nm nanocluster, interconnected network structure and great domain. Such structures strongly affected the mechanical performances of nanocomposite materials. The simultaneous enhancement of strength and elongation was related to homogeneous dispersion of nanoclusters while aggregated great domains severely decreased elongation in spite of obvious reinforcing effect. However, the reinforced materials with high loading of inorganic filler should be paid attention and have economic value to some extent in practical application. With the changes of nano‐SiO₂ distribution, the structures of SPI matrix changed as well. After adding a mall amount of nano‐SiO₂, the damage of glycerol plasticization to ordered structure of SPI was reduced. But as nano‐SiO₂ content increased, the SPI microphase was separated from nano‐SiO₂ domains. Furthermore, the condition of simultaneous reinforcing and toughening was put forward: the moderate aggregation of nano‐SiO₂ as well as all kinds of strong interfacial interactions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Using a Brush Copolymer as Efficient Dispersant for the Preparation of Highly Stabilized Ag Nanoparticles in Aqueous Suspensions

Silver (Ag) nanoparticle has extremely high surface energy and it is difficult to find an efficient dispersant to prevent its agglomeration in suspensions. A new brush copolymer, succinic anhydride modified epoxy-amine poly[(propylene oxide)-co-(ethylene oxide)]-grafted polymer (EPOA), which can efficiently disperse concentrated aqueous suspensions of Ag nanoparticles is revealed. The dispersion efficiency of EPOA for the dispersion of a 60 nm-Ag nanoparticles in aqueous suspension is studied by measuring its sedimentation and rheological behavior, and the results are compared with those of a commercially available dispersant, ammonium poly(acrylic acid) (PAA-NH₄). Interactions between the dispersants and the Ag nanoparticles are characterized by zeta potential and adsorption analyses. Theoretical calculations are conducted to clarify the adsorption and the dominant dispersion stabilization mechanisms of the dispersants. Compared with PAA-NH₄, EPOA obtains a higher stable suspension of Ag nanoparticles with less significant sedimentation over 1 month. The dispersion homogeneity of the suspension remains excellent even at an extremely high solid loading of 30–40 wt%. According to adsorption analysis, it is suggested that both EPOA and PAA-NH₄ adsorb via single-point attachment through the carboxyl group on the Ag surface. Based on theoretical calculations, the Ag nanoparticles are better stabilized by EPOA via an electrosteric dispersion mechanism.     

PES/SiO2 nanocomposite by in situ polymerization: Synthesis,structure, properties,and new applications

SiO₂ nanoparticles of a quantum size (15 nm or less) were prepared via sol–gel method using tetraethylorthosilicate as a precursor. SiO₂ nanoparticles were characterized by X‐ray diffraction (XRD) and field‐emission scanning electron microscopy (FESEM) analyses. Polyethersulfone/silica (PES/SiO₂) crystal structure nanocomposite was prepared by in situ polymerization using silica nanoparticles as reinforcement filler. The polymerization reaction was done at 160°C in paraffin bath in the presence of diphenolic monomers. XRD and FESEM analyses were used to study the morphology of the synthesized nanocomposite. The purity and thermal property of the PES/SiO₂ nanocomposite were studied by energy dispersion of X‐ray analysis and differential scanning calorimetry, respectively. The effect of silica particles on the hydrophilicity of PES/SiO₂ nanocomposite was also investigated. It was showed that the PES/SiO₂ nanocomposite had a higher swelling degree when compared with the pure PES. The synthesized PES/SiO₂ powder was used to remove Cu(II) ions from its aqueous solution. The effect of experimental conditions such as pH, shaking time, and sorbent mass on adsorption capacity of PES/SiO₂ nanocomposite were investigated. It was found that incorporation of a low amount of silica (2 wt%) into the polymer matrix caused the increase of the Cu(II) ions adsorption capacity of PES. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Coincorporation of nano‐silica and nano‐calcium carbonate in polypropylene

In this study, various polypropylene (PP) nanocomposites were prepared by melt blending method. The effects of different spherical nanofillers, such as 50 nm CaCO₃ and 20 nm SiO₂, on the linear viscoelastic property, crystallization behavior, morphology and mechanical property of the resulting PP nanocomposites were examined. Rheological study indicated that coincorporation of nano‐SiO₂ and nano‐CaCO₃ favored the uniform dispersion of nanoparticles in the PP matrix. Differential scanning calorimeter (DSC) and polarizing optical microscopy (POM) studies revealed that the coincorporation of SiO₂ and CaCO₃ nanoparticles could effectively improve PP crystallizability, which gave rise to a lower supercooling temperature (ΔT), a shorter crystallization half‐life (t_1/2) and a smaller spherulite size in comparison with those nanocomposites incorporating only one type of CaCO₃ or SiO₂ nanoparticles. The mechanical analysis results also showed that addition of two types of nanoparticles into PP matrix gave rise to enhanced performance than the nanocomposites containing CaCO₃ or SiO₂ individually. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation of styrene‐acrylic emulsion by using nano‐SiO2 as seeds

A styrene‐acrylic/SiO₂ nanoparticle composite emulsion was prepared by using SiO₂ nanoparticles as seeds. The effect of factors such as the level of nano‐SiO₂, reaction temperature and ultrasound treatment of nano‐SiO₂ on the stability of the polymerization reaction was investigated. Water‐resistance of the emulsion was measured. The level of nano‐SiO₂ in the emulsion was determined by inductively coupled plasma (ICP) spectrometry. The particle morphology of the emulsion with nano‐SiO₂ was observed with transmission electron microscopy (TEM). The kinetics of the polymerization was also studied at various temperatures and various levels of nano‐SiO₂. They showed that the level of nano‐SiO₂ and reaction temperature had a great influence on the monomer conversion, particle size, coagulum content and viscosity of the emulsion. Nano‐SiO₂ treated by ultrasonics can increase the coagulum content greatly, but it does not improve the water resistance of the emulsion. The level of nano‐SiO₂ in the emulsion was lower than the theoretical value. The reaction kinetics indicated that the level of nano‐SiO₂ had less influence on the reaction rate than the reaction temperature. Even a small amount of nano‐SiO₂ can decrease the reaction rate. Copyright © 2004 Society of Chemical Industry     

Structure and properties of nylon 1010/ethylene‐vinyl acetate rubber–based dynamically vulcanized thermoplastic elastomers filled with SiO2

Dynamically vulcanized Nylon 1010/ethylene‐vinyl acetate rubber (EVM)/SiO₂ nanocomposites were prepared. Maleic anhydride grafted ethylene‐vinyl acetate copolymer (EVA‐g‐MA) and nano‐silica (SiO₂) was used as a compatibilizer and a filler, and silane coupling agent (KH550, 3‐triethoxysilylpropylamine) was used to improve the dispersion of SiO₂ in the nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), dynamic mechanical analysis (DMA), differential scanning calorimeter (DSC), and rheology analysis and mechanical properties test. SEM and AFM images showed that the compatibility between Nylon 1010 and EVM was improved by adding the compatibilizer. An increase in SiO₂ content and the addition of the compatibilizer led to an increase in the tensile strength of the nanocomposite. A nanocomposite based on Nylon 1010/EVM/DCP (30/70/0.8) with tensile strength of 16.3 MPa and elongation at break of 180% was obtained by the addition of 15 phr EVA‐g‐MA and 40 phr SiO₂. The non‐isothermal crystallization processes of Nylon/EVM blend were investigated by DSC. It was observed that EVM rubber could act as heterogeneous nuclei for Nylon which was more effective in Nylon/EVM/DCP blend than in Nylon/EVM blend. POLYM. ENG. SCI., 55:581–588, 2015. © 2014 Society of Plastics Engineers     

Preparation of a hydrophobically enhanced antifouling isotactic polypropylene/silicone dioxide flat‐sheet membrane via thermally induced phase separation for vacuum membrane distillation

Isotactic polypropylene (iPP) hydrophobic flat‐sheet membranes were fabricated for use in vacuum membrane distillation (VMD) through a thermally induced phase‐separation process with dispersing hydrophobically modified SiO₂ nanoparticles in the casting solution to achieve a higher hydrophobicity and to sustain a stable flux in VMD. The contact angle (CA) measurements indicated that the incorporation of nano‐SiO₂ into a casting solution mixture containing 20 wt % iPP had a 20.9% higher CA relative to that of SiO₂‐free membranes. The addition of nano‐SiO₂ also induced morphological changes in the membrane structure, including changes in the pore size distribution, porosity, and suppression of macrovoids. The pore size distribution of the iPP–SiO₂ membranes became narrower compared with that of the SiO₂‐free membranes, and the porosity also improved from 35.45 to 59.75% with SiO₂ addition. The average pore size and maximum pore size of the iPP–SiO₂ membranes both decreased. The ability of the membranes to concentrate an astragalus aqueous solution (a type of traditional Chinese medicine) with VMD was investigated. The surface hydrophobicity and antifouling performance of the iPP–SiO₂ membranes improved with nano‐SiO₂ addition to the membrane casting solution. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42615.     

Synergistic effects of silica nanoparticles and reactive compatibilizer on the compatibilization of polystyrene/polyamide 6 blends

This study examines the selective dispersion of nano‐SiO₂ in polystyrene (PS) and polyamide 6 (PA6) blends. With the coupling assistance of 3‐methacryloylpropyl trimethoxysilane (MPS), nano‐SiO₂ surfaces are grafted with PS chains of different molecular weights (SiO₂–MPS–PS) or reactive random copolymer of styrene (St) and 3‐isopropenyl‐α,α′‐dimethylbenzene isocyanate (TMI) to produce SiO₂–MPS–P(St–co–TMI). The isocyanate groups of the reactive copolymer can react with the terminal group of the PA6 to form a graft copolymer, which helps in controlling the location of nano‐SiO₂ between the PS and PA6 phases. Field‐emission scanning electron microscopy imaging combined with the rheological method was used to investigate the location and dispersion of nano‐SiO₂, as well as the morphology of the PS/PA6 blends, at low nano‐SiO₂ loading. Compared with pristine SiO₂, the modified SiO₂ with different chain lengths adjusted the PA6 phase with refined size and narrow size distribution because of the strong interaction with both phases. The SiO₂–MPS–PS with appropriate length is the most effective. The use of nano‐SiO₂ along with the reactive compatibilizer provides synergistic effects for improving the compatibilization of PS/PA6 blends. POLYM. ENG. SCI., 57:1301–1310, 2017. © 2017 Society of Plastics Engineers     

Preparation of core–shell poly(acrylic acid)/polystyrene/SiO2 hybrid microspheres

Core–shell poly(acrylic acid)/polystyrene/SiO₂ (PAA/PS/SiO₂) hybrid microspheres were prepared by dispersion polymerization with three stages in ethanol and ethyl acetate mixture medium. Using vinyltriethoxysilane (VTEOS) as silane agent, functional silica particles structured vinyl groups on surfaces were prepared by hydrolysis and polycondensation of tetraethoxysilane and VTEOS in core stage. Then, the silica particles were used as seeds to copolymerize with styrene and acrylic acid sequentially in shell stage I and stage II to form PAA/PS/SiO₂ hybrid microspheres. Transmission electron microscope results show that most PAA/PS/SiO₂ hybrid microspheres are about 40 nm in diameter, and the silica cores are about 15 nm in diameter, which covered with a layer of PS about 7.5‐nm thick and a layer of PAA about 5‐nm thick. This core–shell structure is also conformed by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and differential scanning calorimetry. FTIR results show that silica core, PS shell, and PAA outermost shell are bonded by covalents. In the core–shell PAA/PS/SiO₂ hybrid microsphere, the silica core is rigidity, and the PAA outermost shell is polarity, while the PS layer may work as lubricant owning to its superior processing rheological property in polymer blending. These core–shell PAA/PS/SiO₂ hybrid microspheres have potential as new materials for polar polymer modification. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1729–1733, 2006     

Investigation on the mechanical performances of ternary nylon 6/SEBS elastomer/nano‐SiO2 hybrid composites with controlled morphology

The distribution of maleated styrene‐hydrogenated butadiene‐styrene (mSEBS) elastomer and nano‐SiO₂ in nylon 6 matrix was controlled by varying the blending procedure. Nano‐SiO₂ particles with different surface properties (hydrophilic versus hydrophobic) were adopted to adjust their interactions with other components. Two different structures, separate dispersion of nano‐SiO₂ and elastomer particles as well as encapsulation of nano‐SiO₂ fillers by the elastomer, were obtained. The structures were confirmed through scanning electron microscope (SEM) investigation. The mechanical measurement results showed that the microstructure and the interactions among the components had dramatic influences on the final mechanical properties, especially Izod fracture toughness, for the ternary nanocomposites. The nanocomposites containing hydrophilic nano‐SiO₂ had better mechanical performances compared with the composites filled with hydrophobic SiO₂ when they were in the same microstructure. The nanocomposites with separate dispersion structure showed higher stiffness compared with those of encapsulation type. However, the separately dispersed nano‐SiO₂ particles restricted the cavitation of elastomer phases that led to low toughening effectiveness. The difference of cavitation intensity for elastomer phase was revealed by SEM investigation on the facture surfaces for the nanocomposites with the two different microstructures. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effects of ball milling dispersion of nano‐SiOx particles on impact strength and crystallization behavior of nano‐SiOx–poly(phenylene sulfide) nanocomposites

Ball milling and mixing with strong shear force and strike force were applied to get fine dispersion of nano‐SiO_x particles in poly(phenylene sulfide) (PPS) powder. Nano‐SiO_x/PPS composites were manufactured by intensive compounding with 3 wt% nano‐SiO_x particles. Effects of the ball milling dispersion on crystal behavior and impact strength of nano‐SiO_x/PPS nanocomposites were studied. Physical mechanisms of ball milling dispersion were investigated. Evaluations based on both WAXD and DSC indicates that crystallization behavior of nano‐SiO_x/heat‐treated PPS (HT‐PPS) nanocomposites was influenced by the ball milling process. Their crystallinity was 25% less while Izod impact strength was 89% better than those of as‐received neat PPS. Increased kinetic energy via ball milling by external work makes nano‐SiO_x able to overcome the attraction from itself to prevent agglomeration. Interfacial bonding of two phases between nano‐SiO_x and PPS was enhanced by crosslinking in HT‐PPS and reduction in surface tension of interface during ball milling. The bonds allow SiO_x to dissipate energy and thus improve PPS impact strength from the addition of nano‐SiO_x. POLYM. ENG. SCI., 46:820–825, 2006. © 2006 Society of Plastics Engineers     

A novel method of hyperbranched poly(amide‐ester) modifying nano‐SiO2 and study of mechanical properties of PVC/nano‐SiO2 composites

A new method of surface chemical modification of nano‐SiO₂ was proposed in the paper. In the presence of catalyst, the active hydroxyl groups on the surface of nano‐SiO₂ reacted with AB₂‐type monomer (N,N‐dihydroxyethyl‐3‐amino methyl propionate) by one‐step polycondensation. And the product's Fourier transform infrared graphs and transmission electron microscopy (TEM) images proved that hyperbranched poly(amine‐ester) (HPAE) was grafted from nano‐SiO₂ surface successfully. Moreover, polyvinyl chloride (PVC)/modified nano‐SiO₂ composites were made by melt‐blending. The composites' structures and mechanical properties were characterized by TEM, scanning electron microscopy, and electronic universal testing machine. The results showed that nano‐SiO₂ grafted by HPAE increased obviously in dispersion in PVC matrix, and mechanical properties of PVC were effectively improved. Additionally, it was found that mechanical properties of PVC/nano‐SiO₂ composites reached the best when weight percent of nano‐SiO₂ in PVC matrix was 1%. Compared with crude PVC, the tensile strength of HPAE grafted nano‐SiO₂/PVC composite increased by 24.68% and its break elongation, flexural strength, and impact strength increased by 15.73, 4.07, and 184.84%, respectively. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Ultrasonic dispersion of nano TiC powders aided by Tween 80 addition

Nano TiC powders were dispersed in aqueous media. Effects of ultrasonic treatment and Tween 80 addition on dispersion of TiC powders were investigated. The results showed that ultrasonic treatment had a large effect on the dispersion of nano TiC powders, and 30 min of ultrasonic treatment was necessary for fine dispersion from TEM images and particle size measurement. Tween 80 was selected as the dispersant. Sedimentation test indicated that 0.5 vol.% was the optimum addition level of Tween 80 in TiC suspension. FTIR spectrum proved the adsorption of Tween 80 on the surface of nano TiC powders. XPS analysis revealed the existence of TiO₂ on the TiC powder surface, which led to a hydroxylated surface during dispersion. In the presence of Tween 80 in the solution, zeta potential values became more negative. Both electrostatic stabilization and steric stabilization were deduced to be the main mechanisms for well dispersion of the nano TiC powders in aqueous media.