Novel conjugated patterns of PBDT‐DTNT and PBDT‐TIPS‐DTNT‐DT complicated polymers onto graphenic nanosheets

The delicacy and connectivity of conductive patterns developed via poly[benzodithiophene‐bis(decyltetradecylthien)naphthothiadiazole] (PBDT‐DTNT) and poly[bis(triisopropylsilylethynyl)benzodithiophene‐bis(decyltetradecylthien)naphthobisthiadiazole] (PBDT‐TIPS‐DTNT‐DT) polymers were investigated on reduced graphene oxide (rGO) nanosheets. The principal driving force for assembly of PBDT‐DTNT and PBDT‐TIPS‐DTNT‐DT chains onto the rGO nanosheets was π‐stacking. In contrast to poly(3‐hexylthiophene) (P3HT), the surface modification of rGO limited the self‐assembly of PBDT‐DTNT and PBDT‐TIPS‐DTNT‐DT complicated polymers. The structure of PBDT‐DTNT and PBDT‐TIPS‐DTNT‐DT chains having fused and infused thiophenic and benzenic rings hindered their molecular ordering compared to P3HT, and therefore the selected area electron diffraction plots demonstrated rings instead of isolated growth planes. Although 2‐thiophene acetic acid (TAA) functional groups and poly(3‐dodecylthiophene) (PDDT) grafted onto rGO nanosheets did not alter the stacking type of the complicated polymers, it made their attachment more difficult. The thickness of π‐stacked patterns ranged from 55 to 70 nm. In the modified areas of rGO, the PBDT‐DTNT and PBDT‐TIPS‐DTNT‐DT chains were not capable of being deposited with a π‐interaction. Hence, the surface modification agents prevented the complicated polymers from interconnectedly assembling and, consequently, constructing longer and larger patterns. This hindrance was more noticeable for the supramolecules based on grafted rGO (rGO‐g‐PDDT) and PBDT‐TIPS‐DTNT‐DT. The conductivity of PBDT‐DTNT/rGO superstructures was the highest (14.61–14.89 S cm^?1). The patterned nanohybrids could be considered as potential super‐materials for morphology‐templating in the active layers of organic–inorganic photovoltaics. © 2018 Society of Chemical Industry     

Well‐functioned photovoltaics based on nanofibers composed of PBDT‐TIPS‐DTNT‐DT and graphenic precursors thermally modified by polythiophene,polyaniline and polypyrrole

Reduced graphene oxide nanosheets modified by conductive polymers including polythiophene (GPTh), polyaniline (GPANI) and polypyrrole (GPPy) were prepared using the graphene oxide as both substrate and chemical oxidant. UV–visible and Raman analyses confirmed that the graphene oxide simultaneously produced the reduced graphene oxide and polymerized the conjugated polymers. The prepared nanostructures were subsequently electrospun in mixing with poly(3‐hexylthiophene) (P3HT)/phenyl‐C71‐butyric acid methyl ester (PC₇₁BM) and poly[bis(triisopropylsilylethynyl)benzodithiophene‐bis(decyltetradecylthien)naphthobisthiadiazole] (PBDT‐TIPS‐DTNT‐DT)/PC₇₁BM components and embedded in the active layers of photovoltaic devices to improve the charge mobility and efficiency. The GPTh/PBDT‐TIPS‐DTNT‐DT/PC₇₁BM devices demonstrated better photovoltaic features (J_sc = 11.72 mA cm^?2, FF = 61%, V_oc = 0.68 V, PCE = 4.86%, μ_h = 8.7 × 10^?3 cm² V^–1 s^?1 and μ_e = 1.3 × 10^?2 cm² V^–1 s^?1) than the GPPy/PBDT‐TIPS‐DTNT‐DT/PC₇₁BM (J_sc = 10.30 mA cm^?2, FF = 60%, V_oc = 0.66 V, PCE = 4.08%, μ_h = 1.4 × 10^?3 cm² V^–1 s^?1 and μ_e = 8.9 × 10^?3 cm² V^–1 s^?1) and GPANI/PBDT‐TIPS‐DTNT‐DT/PC₇₁BM (J_sc = 10.48 mA cm^?2, FF = 59%, V_oc = 0.65 V, PCE = 4.02%, μ_h = 8.6 × 10^?4 cm² V^–1 s^?1 and μ_e = 7.8 × 10^?3 cm² V^–1 s^?1) systems, assigned to the greater compatibility of PTh in the nano‐hybrids and the thiophenic conjugated polymers in the bulk of the nanofibers and active thin films. Furthermore, the PBDT‐TIPS‐DTNT‐DT polymer chains (3.35%–5.04%) acted better than the P3HT chains (2.01%–3.76%) because of more complicated conductive structures. © 2019 Society of Chemical Industry     

Butterfly nanostructures via regioregularly grafted multi‐walled carbon nanotubes and poly(3‐hexylthiophene) to improve photovoltaic characteristics

Butterfly nanostructures were designed using multi‐walled carbon nanotubes (CNTs) grafted with regioregular poly(3‐hexylthiophene) (RR‐P3HT) chains (CNT‐graft‐P3HT). The secondary crystallization of RR‐P3HT free chains onto CNT‐graft‐P3HT reflected the donor–acceptor supramolecules with a butterfly configuration, in which the CNT acted as the body of the butterfly and seeded crystallization of P3HT free chains resulted in the wings having a width of 37–38 nm. Butterfly supramolecules demonstrated high melting point (241.2 °C), fusion enthalpy (31.5 J g^?1) and crystallinity (85.13%). High photoluminescence quenching and thus donating–accepting property were also detected for the butterfly nanohybrids with a bandgap energy of 1.94 eV. Incorporation of butterfly nanostructures in the active layer of photovoltaic devices (P3HT:butterfly) conspicuously affected the system characteristics including short circuit current density (J_sc; 10.84 mA cm^?2), fill factor (FF; 56%) and power conversion efficiency (PCE; 3.94%). The inclusion of phenyl‐C71‐butyric acid methyl ester molecules as second acceptor in thin‐film active layers further increased the efficacy of systems, i.e. J_sc of 12.23 mA cm^?2, FF of 63%, open circuit voltage of 0.66 V and PCE of 5.08%, without considering external treatments and additives. © 2018 Society of Chemical Industry     

Efficiency above 6% in poly(3‐hexylthiophene):phenyl‐C‐butyric acid methyl ester photovoltaics via simultaneous addition of poly(3‐hexylthiophene) based grafted graphene nanosheets and hydrophobic block copolymers

A combination of reduced graphene oxide (rGO) nanosheets grafted with regioregular poly(3‐hexylthiophene) (P3HT) (rGO‐g‐P3HT) and P3HT‐b‐polystyrene (PS) block copolymers was utilized to modify the morphology of P3HT:[6,6]‐phenyl‐C71‐butyric acid methyl ester (PC71BM) active layers in photovoltaic devices. Efficiencies greater than 6% were acquired after a mild thermal annealing. To this end, the assembling of P3HT homopolymers and P3HT‐b‐PS block copolymers onto rGO‐g‐P3HT nanosheets was investigated, showing that the copolymers were assembled from the P3HT side onto the rGO‐g‐P3HT nanosheets. Assembling of P3HT‐b‐PS block copolymers onto the rGO‐g‐P3HT nanosheets developed the net hole and electron highways for charge transport, thereby in addition to photoluminescence quenching the charge mobility (μ_h and μ_e) values increased considerably. The best charge mobilities were acquired for the P3HT₅₀₀₀₀:PC71BM:rGO‐g‐P3HT₅₀₀₀₀:P3HT₇₀₀₀‐b‐PS₁₀₀₀ system (μ_h = 1.9 × 10^?5 cm² V^–1 s^–1 and μ_e = 0.8 × 10^?4 cm² V^–1 s^–1). Thermal annealing conducted at 120 °C also further increased the hole and electron mobilities to 9.8 × 10^?4 and 2.7 × 10^?3 cm² V^–1 s^–1, respectively. The thermal annealing acted as a driving force for better assembly of the P3HT‐b‐PS copolymers onto the rGO‐g‐P3HT nanosheets. This phenomenon improved the short circuit current density, fill factor, open circuit voltage and power conversion efficiency parameters from 11.13 mA cm^?2, 0.63 V, 62% and 4.35% to 12.98 mA cm^?2, 0.69 V, 68% and 6.09%, respectively. © 2019 Society of Chemical Industry     

Improved stability in P3HT:PCBM photovoltaics by incorporation of well‐designed polythiophene/graphene compositions

Morphological and photovoltaic stabilities of poly(3‐hexylthiophene) (P3HT):phenyl‐C₆₁‐butyric acid methyl ester (PC₇₁BM) solar cells were investigated in pristine and modified states. To this end, four types of patterned/assembled nanostructures, namely reduced graphene oxide (rGO)‐g‐poly(3‐dodecylthiophene)/P3HT patched‐like pattern, rGO–polythiophene/P3HT/PC₇₁BM nanofiber, rGO‐g‐P3HT/P3HT cake‐like pattern and supra(polyaniline (PANI)‐g‐rGO/P3HT), were designed on the basis of rGO and various conjugated polymers. Intermediately covered rGO nanosheets by P3HT crystals (supra(PANI‐g‐rGO/P3HT)) performed better than sparsely (patched‐like pattern) and fully (cake‐like pattern) covered ones in P3HT:PC₇₁BM solar cell systems. Supra(PANI‐g‐rGO/P3HT) nanohybrids largely phase‐separated in active layers (root mean square = 0.88 nm) and also led to the highest performance (power conversion efficiency of 5.74%). The photovoltaic characteristics demonstrated decreasing trends during air aging for all devices, but with distinct slopes. The steepest decreasing plots were obtained for the unmodified P3HT:PC₇₁BM devices (from 1.77% to 0.28%). The two supramolecules with the most ordered structures, that is, cake‐like pattern (10.12 mA cm^?2, 51%, 0.58 V, 2.2 × 10^?6 cm² V^?1 s^?1, 4.3 × 10^?5 cm² V^?1 s^?1, 0.69 nm and 2.99%) and supra(PANI‐g‐rGO/P3HT) (12.51 mA cm^?2, 57%, 0.63 V, 1.2 × 10^?5 cm² V^?1 s^?1, 3.4 × 10^?4 cm² V^?1 s^?1, 0.82 nm and 4.49%), strongly retained morphological and photovoltaic stabilities in P3HT:PC₇₁BM devices after 1 month of air aging. According to the morphological, optical, photovoltaic and electrochemical results, the supra(PANI‐g‐rGO/P3HT) nanohybrid was the best candidate for stabilizing P3HT:PC₇₁BM solar cells. © 2020 Society of Chemical Industry     

Diffusivities of dichloromethane in poly(lactide‐co‐glycolide)

Diffusion of dichloromethane in poly(lactide‐co‐glycolide) (PLGA), the rate‐limiting step in the later stages of drying of microparticles formed in common encapsulation processes, was studied by the step‐change sorption technique in a dynamic vapor sorption apparatus. Methods were developed to create films of polymer with the appropriate thicknesses for accurate diffusion determination over a wide range of solvent composition. Mutual diffusivities were measured at 5, 25, and 35°C from 10 to 70 wt % solvent. Values range from 2 × 10^?10 m²/s at high solvent compositions to as low as 1 × 10^?13 m²/s at solvent compositions just above the glass transition of the mixture. Equilibrium sorption isotherms were measured in the same apparatus and agreed favorably with Flory‐Huggins theory using a value of χ = 0.31. The glass transition temperatures of the system were measured over the range of 0–11 wt % solvent content by modulated differential scanning calorimetry. The composition dependence was fit to the Fox equation, which estimated values of the pure polymer and the solvent T_g to be 39.3 and ?131°C, respectively. These values, along with the diffusivity data, were used to deduce the free‐volume parameters specific to PLGA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ionic conductivity and morphology of semi‐interpenetrating‐type polymer electrolyte entrapping poly(siloxane‐g‐allyl cyanide)

We prepared a semi‐IPN (interpenetrating network)‐type solid polymer electrolyte (SPE) using poly (ethylene glycol)dimethacrylate (PEGDMA) as a polymer matrix containing a monocomb‐type poly(siloxane‐g‐allyl cyanide) and poly(ethylene glycol)dimethylether (PEGDME) for the lithium secondary battery. The poly(siloxane‐g‐allyl cyanide)s were prepared by a hydrosilation reaction of poly (methyl hydrosiloxane) with allyl cyanide and characterized by ¹H NMR and FTIR. The semi‐IPN‐type electrolyte was prepared by thermal curing, and conductivities of samples were measured by impedance spectroscopy using an indium tin oxide (ITO) electrode. The ionic conductivity of the semi‐IPN‐polymer electrolyte was about 1.05 × 10^?5 S cm^?1 with 60 wt % of the poly(siloxane‐g‐allyl cyanide) and 6.96 × 10^?4 S cm^?1 with 50 wt % of the PEGDME and 10 wt % of the poly(siloxane‐g‐allyl cyanide) at 30°C. The SEM morphology of the cross section of the semi‐IPN‐polymer electrolyte film was changed from discontinuous network to continuous network as increasing the PEGDME content and decreasing the poly(siloxane‐g‐allyl cyanide) content. The mechanical stability was also enhanced when increasing the PEGDME content. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of high‐density polyethylene/rGO‐CNT‐Fe nanocomposites with outstanding magnetic and electrical properties

Semi‐conducting polyethylene (PE) nanocomposites with outstanding magnetic properties at room temperature were synthesized. These exceptional properties, for a diamagnetic and insulating matrix as PE, were obtained by polymerizing ethylene in the presence of a catalytic system formed by a metallocene catalyst supported on a mixture of reduced graphene oxide (rGO) and carbon nanotubes with encapsulated iron (CNT‐Fe). It was used a constant and very low amount of CNT‐Fe, obtained by vapor chemical deposition using ferrocene. The percolation threshold, to achieve conductivity, was obtained using a variable amount of rGO. The nanocomposites were semiconductors with the addition of 2.8 wt % and 6.0 wt % of the filler, with electrical conductivities of 4.99 × 10^?6 S cm^?1 and 7.29 × 10^?4 S cm^?1, respectively. Very high coercivity values of 890–980 Oe at room temperature were achieved by the presence of only 0.04–0.06 wt % of iron in the nanocomposites. The novelty of this work is the production of a thermoplastic with both, magnetic and electric properties at room temperature, by the use of two fillers, that is rGO and CNT‐Fe. The use of a small amount of CNT‐Fe to produce the magnetic properties and variable amount of rGO to introduce the electrical conductivity in PE matrix let to balance both properties. The encapsulation strategy used to obtain Fe in CNT, protect Fe from easy oxidation and aggregation. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45382.     

Preparation of bi‐continuous poly(acrylonitrile‐co‐methyl acrylate) microporous membranes by a thermally induced phase separation method

Poly(acrylonitrile‐co‐methyl acrylate) [P(AN‐MA)] flat microfiltration membranes were successfully prepared via the thermally induced phase separation (TIPS) method, by using low polar caprolactam (CPL) and methoxypolyethylene glycol 550 (MPEG 550) as the mixed diluent. In this work, P(AN‐MA) membranes exhibit bi‐continuous networks, porous surfaces, high porosity, and big pore size, when membrane fabricated from a high MPEG 550 content, low P(AN‐MA) concentration, and small cooling rate, it can be dry state preservation and do not need to be impregnated by any solvent. When the ternary system was composed of 15 wt % P(AN‐MA), 12.5 wt % CPL, and 87.5 wt % MPEG 550, formed at 25 °C air bath, membrane has the highest water flux of 4420 L m^?2 h^?1. The obtained P(AN‐AN) membrane displays a high carbonic black ink rejection ranging from 83.7 to 98.5 wt %. Moreover, P(AN‐MA) polymer not only retains the advantages of PAN but also reduces the polar component from 16.2 to 10.77 MPa^0.5. It can be used membrane matrix to obtain pore structure and excellent mechanical property membrane via TIPS. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46173.     

Synthesis and characterization of novel polyimides starting from 1,2‐bis(p‐dimethylaminobenzylideneimino)alkane homologues and various dianhydrides

The objective of this research was the preparation of polyimides from 1,2‐bis(p‐dimethylaminophenylimino)alkane homologues and various dianhydrides in N‐methylpyrrolidone by one‐stage polycondensation. The monomers were prepared via condensation of p‐dimethylaminobenzaldehyde and the corresponding diamines, 1,4‐diaminobutane, 1,3‐diaminopropane and 1,2‐diaminoethane. The influence of the incorporation of this moiety into the polymer backbone on the properties of the polyimides has been evaluated. The thermogram of the polyimides indicated that PI‐10 to PI‐32 had T_g values ranging from 181 to 290 °C. The inherent viscosities of the polymers ranged from 0.99 to 2.05 dl g^?1, and the highest solubility was obtained without significant loss of the thermal properties. Copyright © 2004 Society of Chemical Industry     

Preparation,analysis, and isothermal crystallization behavior of poly[1,3‐bis(aminomethyl)cyclohexamethylene oxamide]

Poly[1,3‐bis(aminomethyl)cyclohexaneoxamide] (PBAC2) was synthesized using 1,3‐bis(aminomethyl)cyclohexane (BAC) and dibutyl oxalate (DO) via spray/solid‐state polycondensation (SSP). The structure of the synthesized polyoxamide was confirmed by ¹H‐nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy. The weight average molecular weight (M_w) of the polyoxamides prepared was 1.35 × 10⁵. The polyoxamides showed excellent thermal properties with glass transition temperature (T_g) of 150 °C, melting temperature (T_m) of 318 °C, crystallization temperature(T_c) of 253 °C, and initial degradation temperature (T_d) of 417 °C suggesting higher thermal stability than commercial polyamide 6 (T_d = 378 °C). Kinetic studies of PBAC2 predicted a two‐dimensional crystal growth. X‐ray diffraction powder diffraction suggested that the polymer has high crystallinity. A saturated water absorption of 2.8 wt % was recorded for the new polyoxamide, giving it a competitive edge for applications in civil aviation, reinforced plastics, and electronics industry where precise dimensional stability and high thermal resistance properties are a priority. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46345.     

Synthesis and characterization of homo‐ and copolymers of 3‐(2‐cyano ethoxy)methyl‐ and 3‐[methoxy(triethylenoxy)]methyl‐3′‐methyl‐oxetane

Two oxetane‐derived monomers 3‐(2‐cyanoethoxy)methyl‐ and 3‐(methoxy(triethylenoxy)) methyl‐3′‐methyloxetane were prepared from the reaction of 3‐methyl‐3′‐hydroxymethyloxetane with acrylonitrile and triethylene glycol monomethyl ether, respectively. Their homo‐ and copolyethers were synthesized with BF₃· Et₂O/1,4‐butanediol and trifluoromethane sulfonic acid as initiator through cationic ring‐opening polymerization. The structure of the polymers was characterized by FTIR and¹H NMR. The ratio of two repeating units incorporated into the copolymers is well consistent with the feed ratio. Regarding glass transition temperature (T_g), the DSC data imply that the resulting copolymers have a lower T_g than pure poly(ethylene oxide). Moreover, the TGA measurements reveal that they possess in general a high heat decomposition temperature. The ion conductivity of a sample (P‐AN 20) is 1.07 × 10^?5 S cm^?1 at room temperature and 2.79 × 10^?4 S cm^?1 at 80 °C, thus presenting the potential to meet the practical requirement of lithium ion batteries for polymer electrolytes. Copyright © 2005 Society of Chemical Industry     

Highly fluorinated poly(ether‐imide)s derived from 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether and aromatic dianhydrides

A new diamine, 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether (FPAPE) was synthesized through the Suzuki coupling reaction of 2,2′‐diiodo‐4,4′‐dinitrodiphenyl ether with 3,4,5‐trifluorophenylboronic acid to produce 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐dinitrodiphenyl ether (FPNPE), followed by palladium‐catalyzed hydrazine reduction of FPNPE. FPAPE was then utilized to prepare a novel class of highly fluorinated all‐aromatic poly(ether‐imide)s. The chemical structure of the resulting polymers is well confirmed by infrared and nuclear magnetic resonance spectroscopic methods. Limiting viscosity numbers of the polymer solutions at 25 °C were measured through the extrapolation of the concentrations used to zero. M_n and M_w of these polymers were about 10 000 and 25 000 g mol^?1, respectively. The polymers showed a good film‐forming ability, and some characteristics of their thin films including color and flexibility were investigated qualitatively. An excellent solubility in polar organic solvents was observed. X‐ray diffraction measurements showed that the fluoro‐containing polymers have a nearly amorphous nature. The resulting polymers had T_g values higher than 340 °C and were thermally stable, with 10% weight loss temperatures being recorded above 550 °C. Based on the results obtained, FPAPE can be considered as a promising design to prepare the related high performance polymeric materials. Copyright © 2011 Society of Chemical Industry     

Synthesis and characterization of bis(4‐cyanato‐3,5‐dimethylphenyl)anisylmethane/epoxy/glass fiber composites

Bis(4‐cyanato‐3,5‐dimethylphenyl)anisylmethane was prepared by treating CNBr with bis(4‐hydroxy‐3,5‐dimethylphenyl)anisylmethane and blended with commercial epoxy resin in different ratios and cured at 120°C for 2 h, 180°C for 1 h, and postcured at 220°C for 1 h using diamino diphenyl methane as curing agent. Castings of neat resin and blends were prepared and characterized. The composite laminates were also fabricated with glass fiber using the same composition. The tensile strength of the composites increased with increase in cyanate content (3, 6, and 9%) from 322 to 355 MPa. The fracture toughness values also increased from 0.7671 kJ/m², for neat epoxy resin, to 0.8615 kJ/m², for 9% cyanate ester‐modified epoxy system. The 10% weight loss temperature of pure epoxy (358°C) was increased to 390°C by the incorporation of cyanate ester resin. The incorporation of cyanate ester up to 9% in the epoxy resin increases the T_g from 143 to 147°C. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Preparation and characterization of poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones

The two poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones have been prepared via polycondensation reaction of di‐tert‐butyl adipate and di‐tert‐butyl fumarate with 2,2‐bis(p‐chloro dimethylsiloxy‐phenyl)propane to give tert‐butyl chloride as the condensate. The polymerizations were performed under nitrogen at 110°C for 24 h without addition of solvents and catalysts to obtain the poly(silyl ester)s with weight average molecular weights typically ranging from 5000 to 10,000 g/mol. Characterization of the poly(silyl ester)s included ¹H NMR and ¹³C NMR spectroscopies, infrared spectroscopy, ultraviolet spectroscopy, differential scanning calorimetry, thermogravimetric analysis (TGA), gel permeation chromatography, and Ubbelohde viscometer. The glass transition temperatures (T_g) of the obtained polymers were above zero because of the introducing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones. The TGA/DTG results showed that the obtained poly(silyl ester)s were stable up to 180°C and the residual weight percent at 800°C were 18 and 9%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1937–1942, 2006     

Correlating structure with ionic conductivity in bis(phosphonium)‐containing [NTf2] thiol–ene networks

Thiol–ene photopolymerization was employed in order to prepare a series of covalently crosslinked bis(phosphonium)‐containing poly(ionic liquid) (PIL) networks. While the counteranion was held constant (NTf₂), the structure of the bis(phosphonium)‐containing ‘ene’ monomer was varied in order to explore the breadth of thermal, mechanical and conductive properties available for this system. Towards this end, it was determined that more flexible spacers within the cationic monomer led to PIL networks with lower T_g values and higher conductivities. Most notable was a two‐ to three‐orders‐of‐magnitude increase in ionic conductivity (from 10^?9 to 10^?6 S cm^?1 at 30 °C, 30% relative humidity) when the R group on phosphonium was changed from phenyl to isopropyl. Changing the functional group ratio to off‐stoichiometry also led to a slight increase in conductivity. Although the thermal stability (T_d5%) of the phosphonium ionic liquid monomers was found to be significantly higher (>400 °C) than that of analogous imidazolium monomers, this improvement was not observed to directly transfer over to the polymer where a two‐step decomposition pathway was observed. The first step is attributed to the thiol monomer backbone while the second step correlates well with decomposition of the phosphonium portion of the PIL. © 2019 Society of Chemical Industry     

New low bandgap conjugated polymer derived from 2, 7‐carbazole and 5, 6‐bis(octyloxy)‐4, 7‐di(thiophen‐2‐yl) benzothiadiazole: Synthesis and photovoltaic properties

To develop conjugated polymers with low bandgap, deep HOMO level, and good solubility, a new conjugated alternating copolymer PC‐DODTBT based on N‐9′‐heptadecanyl‐2,7‐carbazole and 5, 6‐bis(octyloxy)‐4,7‐di(thiophen‐2‐yl)benzothiadiazole was synthesized by Suzuki cross‐coupling polymerization reaction. The polymer reveals excellent solubility and thermal stability with the decomposition temperature (5% weight loss) of 327°C. The HOMO level of PC‐DODTBT is ‐5.11 eV, indicating that the polymer has relatively deep HOMO level. The hole mobility of PC‐DODTBT as deduced from SCLC method was found to be 2.03 × 10^?4 cm²/Versus Polymer solar cells (PSCs) based on the blends of PC‐DODTBT and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) with a weight ratio of 1:2.5 were fabricated. Under AM 1.5 (AM, air mass), 100 mW/cm^?2 illumination, the devices were found to exhibit an open‐circuit voltage (V_oc) of 0.73 V, short‐circuit current density (J_sc) of 5.63 mA/cm^?2, and a power conversion efficiency (PCE) of 1.44%. This photovoltaic performance indicates that the copolymer is promising for polymer solar cells applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization of poly‐2‐ (2‐hydroxybenzylideneamino)‐6‐phenyl‐4,5,6, 7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile: Investigation of antibacterial activity and optical properties

The oxidative polycondensation reaction conditions of 2‐(2‐hydroxybenzylideneamino)‐6‐phenyl‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile were examined. The magnitude of the reflectance of the polymer decreases sharply with increasing of wavelength up to 524 nm, then reflectance of the polymer increases slowly with increasing of wavelength. The refractive index values of the polymer vary from 1.474 to 2.350. The E_p and E_d values of the polymer were found to be 4.56 and 7.068 eV, respectively. Absorption coefficient K of the polymer is of the order 817.062–1434.77 m^?1. Angle values of incidence and refraction of the polymer vary from 57.36 to 66.95° and from 23.05 to 32.65°, respectively. The film‐phase thickness of the polymer increases with increasing photon energy. The thickness, d, of the polymer was of the order 439.3–4184.7 Å for 190 and 1100 nm, respectively. The real part of dielectric constant of the polymer decreases slowly with increasing of frequency up to about 600 THz, then the real part of dielectric constant of the polymer increases sharply with increasing of frequency. The real and imaginary parts of dielectric constant of the polymer vary from 2.17 to 5.52 and from 5.81 × 10^?5 to 3.58 × 10^?4, respectively. Finally, polymer was tested for antibacterial activities against some bacteria. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Vinyl‐type homo‐ and copolymerization of norbornene catalyzed by bis(phenoxyimine) titanium complex

A ternary catalytic system consisting of a bis(phenoxyimine) titanium complex, triisobutylaluminium and an organoboron compound exhibited high activity in the vinyl‐type homopolymerization of norbornene. The obtained polynorbornene showed a modest molecular weight (M _n ≈ 5 × 10⁴ g mol^?1) and broad molecular weight distribution (polydispersity index ≈ 3.5). A copolymer of norbornene with 1,3‐butadiene was prepared using a binary catalytic system consisting of bis(phenoxyimine) titanium complex and triisobutylaluminium. The norbornene units in the copolymer adopted a vinyl‐type addition structure confirmed using distortionless enhancement by polarization transfer 135 ¹³C NMR microstructure analyses. Polymerization kinetics studies showed that neither monomer feed ratio nor conversion had an effect on the composition of the copolymer backbone which was composed of 55% norbornene units and 45% 1,3‐butadiene units. The essentially constant polymer composition implied an alternating nature of chain propagation. The copolymer exhibited good thermal stability and moderate glass transition temperature (50.9–68.2 °C) with a relatively high molecular weight (M _w = 0.18 × 10–1.31 × 10⁵ g mol^?1), and excellent transparency (maximal transmittance >80%). © 2017 Society of Chemical Industry