共查询到20条相似文献,搜索用时 836 毫秒
1.
2.
3.
4.
谢扬勋 《机械工程与自动化》2008,(2):191-193
首先介绍了钢铁冶金轧机润滑的现状和存在问题,提出了使用油气润滑技术的解决方案;然后阐述了油气润滑技术的原理、系统组成和主要技术参数,总结了油气润滑技术的优点;最后,指出了油气润滑技术发展的方向. 相似文献
5.
6.
油雾润滑技术系统介绍及应用 总被引:1,自引:0,他引:1
分析了油雾润滑技术的特点、油雾润滑设备的主要组成、油雾量的计算、油雾润滑系统的选择与应用以及影响油雾润滑性能的主要因素等问题,并指出使用油雾润滑系统之后,可获得极大的收益。 相似文献
7.
矿山机械维修中,润滑油技术的运用不但关系着维修工作效率,而且还会增加矿山机械维修费用,因此,加强润滑油技术在矿山机械维修的应用探讨,对保证矿山机械优良的工作性能具有重要意义。本文分析了矿山机械润滑过程中存在的问题,介绍了机械润滑应注意的事项,并对合理润滑技术的应用进行了详细的探讨,以期为矿山机械的维修提供参考。 相似文献
8.
固体润滑技术及其工程应用 总被引:2,自引:0,他引:2
叙述了固体润滑技术的发展,介绍了固体润滑的特点及常用固体润滑材料,重点探讨了固体润滑技术在机械传动零部件、机械加工以及特殊工况下的应用. 相似文献
9.
本文以润滑技术在煤矿机械运行中的作用为出发点,分析了煤矿机械中常用的润滑技术,探究了煤矿机械中运用润滑技术的现状,并提出了润滑技术在煤矿机械中运用的策略,以期为提高煤矿机械使用寿命和维护煤矿机械性能提供参考价值。 相似文献
10.
为了研究润滑技术在煤矿机械中的应用价值,本文首先简单的介绍了现代润滑技术对于煤矿机械设备的主要作用,然后对于润滑技术在煤矿机械设备维护中的应用进行了研究,最后对于现代润滑技术的优越性进行了研究。本文的研究可以作为煤矿机械设备维护工作中的参考。 相似文献
11.
12.
根据目前国内研制的一般智能化的汽车底盘集中润滑系统存在的不足,提出了基于单片机技术的温度自适应汽车底盘集中润滑系统。通过检测各个润滑点的温度,自动判断加脂间隔,并控制油泵进行合理的加脂,实现真正的无人值守功能。以单片机为核心,设计了控制系统的硬件电路和软件流程。 相似文献
14.
15.
对北满特钢锻钢公司快锻4#台车加热炉在生产中出现的问题进行了分析,并对设备缺陷进行了相应的优化改造,改造后的加热炉达到了满意的效果,提高了生产效率 相似文献
16.
17.
针对D系列煤气风机在使用中存在的问题,对风机的结构进行了优化改进,实施改进措施后取得了较好的效果,设备运行正常,解决了煤气泄漏问题,实现了安全生产,达到了环保要求。 相似文献
18.
介绍了数控铣削加工中的宏程序指令,探讨在数控铣床上实现非圆弧曲线的加工方法与程序编制等问题,在生产中得到了广泛应用。 相似文献
19.
P. Shahabudeen K. Krishnaiah M. Thulasi Narayanan 《The International Journal of Advanced Manufacturing Technology》2003,21(10-11):754-759
The design of a kanban system addresses the selection of two important parameters, i.e. the number of kanbans and lot sizes of part types. Kanban-based operational planning and control issues have been tackled in a number of studies by means of analytical or simulation modelling. However, the estimation of these parameters becomes complicated because of issues such as variation in demand, variation in processing times, different types of products, etc. The combinatorial property of such problems warrants the development of efficient methodology or heuristics to obtain a good solution. In this paper, an attempt has been made to select the number of production and withdrawal kanbans at each workstation and the lot size for each part type required to achieve the best performance using a simulated annealing algorithm technique. An object-oriented simulation model of a two-card dynamic kanban system capable of handling different types of part with different demand requirements has been developed and used for the analysis. Each part type has its own number of production ordering kanbans and withdrawal kanbans at each workstation. The lot size can also be different for different part types. A bicriteria objective function comprising mean throughput rate and aggregate average kanban queue has been used for evaluation. Different types of problem have been tried out and the performance of the algorithm is studied. 相似文献
20.
综述了特种加工,如电火花加工,电解加工,激光加工等加工过程中可能产生的有害有毒气体,废弃物,电磁辐射等危害因素,并列举了相应的防治措施,对电气安全,防火防焊等极为重要的安全生产问题,进行了专门论述,提出了预防措施,对保护环境,保证安全生产有一定的指导作用。 相似文献