Recent advances in phosphorescent OLEDs for small‐ and large‐area‐display sizes

Abstract— State‐of‐the‐art phosphorescent organic light‐emitting diode (PHOLED?) lifetime and efficiency performances for a range of emission colors are reported. Lifetimes in excess of 100,000 hours were demonstrated at display luminance levels for yellow‐green and NTSC deep‐red emission. In addition, external quantum efficiencies close to the theoretical maximum are demonstrated for long‐lived PHOLEDs.     

Fluorescent‐based tandem white OLEDs designed for display and solid‐state‐lighting applications

Abstract— Highly efficient tandem white OLEDs based on fluorescent materials were developed for display and solid‐state‐lighting (SSL) applications. In both cases, the white OLED must have high power efficiency and long lifetime, but there are a number of attributes unique to each application that also must be considered. Tandem OLED technology has been demonstrated as an effective approach to increase luminance, extend OLED lifetime, and allow for use of different emitters in the individual stacks for tuning the emission spectrum to achieve desired performance. Here, examples of bottom‐emission tandem white OLEDs based on small‐molecule fluorescent emitters designed for displays and for SSL applications are reported. A two‐stack tandem white OLED designed for display applications achieved 36.5‐cd/A luminance efficiency, 8500K color temperature, and lifetime estimated to exceed 50,000 hours at 1000 cd/m². This performance is expected to meet the specifications for large AMOLED displays. A two‐stack tandem white OLED designed for SSL applications achieved 20‐lm/W power efficiency, 38‐cd/A luminance efficiency, 3500K color temperature, and lifetime estimated to exceed 140,000 hours at 1000 cd/m². With the use of proven light‐extraction techniques, it is estimated that this tandem device will exceed 40 lm/W with more than 500,000‐hour lifetime, performance that should be sufficient for first‐generation lighting products.     

A 100,000‐cd/m2 capacity‐coupled electrodeless discharge backlight with high efficacy for LC TVs

A capacity‐coupled electrodeless Hg discharge lamp has been developed for LC TV backlightings. By applying sinusoidal voltages which are 180° out of phase with a pair of external electrodes, a luminous uniformity of over 84% is attained in two types of lamps whose lengths are 190 and 390 mm. Luminance, efficacy, and input power to the lamp are 114,000 cd/m², 35 lm/W, and 21.5 W when the 390‐mm lamp is driven at 5 MHz. With a frequency below 1.1 MHz, eight 390‐mm lamps, connected in parallel to one another without external ballast impedance, can be driven by using a single inverter.     

Highly efficient white organic light‐emitting diodes with over 100 lm/W for next‐generation solid‐state lighting

High‐performance two‐unit all‐phosphorescent white devices on a built‐up light extraction substrate that comprised high‐index materials were studied. As a result of suitable optical and electrical design, the device showed an extremely high efficacy of 114 lm/W at 1000 cd/m². The device also showed 102 lm/W with long lifetime (LT70) of over 10,000 h at 3000 cd/m². Outstanding external quantum efficiency of almost 50% was also achieved in a flat panel with an emissive area of 25 cm². Color coordinates of the panel met the Energy Star ® criteria of solid‐state lighting with CIE (Commission Internationale de l'Éclairage) 1931 (x, y) = (0.477, 0.423), and the color rendering index was 81.     

A 13‐bit universal column driver for various displays of OLED and LCD

A universal column driver is implemented in a 0.13‐µm high‐voltage CMOS process for not only TFT‐LCD but also OLED applications. The proposed column driver employs 13‐bit linear DAC to cover all gamma curves of display applications and address‐based configuration for intra‐ panel interface protocol to support both TV and IT applications. Measured results demonstrate the average voltage of output channels (AVO) is under 1mv, which satisfies 1‐LSB resolution at 18.5V of AVDD.     

Highly efficient blue organic light‐emitting diode with high color purity using 4,4′‐N,N′‐dicarbazole‐biphyenyl (CBP) doped with 1,4‐bis[2‐(3‐N‐ethylcarbazoryl) vinyl]benzene (BCzVB)

Abstract— An efficient pure blue multilayer organic light‐emitting diode employing 1,4‐bis[2‐(3‐N‐ethylcarbazoryl)vinyl]benzene (BCzVB) doped into 4,4′‐N,N′‐dicarbazole‐biphyenyl (CBP) is reported. The device structure is ITO (indium tin oxide)/TPD (N,N′‐diphenyl‐N,N′‐bis (3‐methylphenyl)‐1,1′biphenyl‐4,4′diamine)/CBP:BCzVB/Alq₃ (tris‐(8‐hydroxy‐quinolinato) aluminum)/Liq (8‐hydroxy‐quinolinato lithium)/Al; here TPD was used as the hole‐transporting layer, CBP as the blue‐emitting host, BCzVB as the blue dopant, Alq₃ as the electron‐transporting layer, Liq as the electron‐injection layer, and Al as the cathode, respectively. A maximum luminance of 8500 cd/m² and a device efficiency of 3.5 cd/A were achieved. The CIE co‐ordinates were x = 0.15, y = 0.16. The electroluminescent spectra reveal a dominant peak at 448 nm and additional peaks at 476 nm with a full width at half maximum of 60 nm. The Föster energy transfer and, especially, carrier trapping models were considered to be the main mechanism for exciton formation on BCzVB molecules under electrical excitation.     

White LEDs using the sharp β‐sialon: Eu phosphor and Mn‐doped red phosphor for wide‐color gamut display applications

The sharp β‐sialon (Si_6‐zAl_zO_zN_8‐z : 0 < z < 0.1):Eu green phosphor, combining with a blue LED and CaAlSiN₃:Eu red phosphor, is suitable for the wide‐color gamut white LEDs backlighting system, because of its sharp and asymmetric emission spectrum shape. However, the color gamut and the brightness of the aforementioned display is restricted because of the wide emission band of the CaAlSiN₃:Eu red phosphor. In this work, we used K₂SiF₆:Mn as an alternate red phosphor, which has a sharp emission spectrum. The display with the white LED using sharp β‐sialon:Eu and K₂SiF₆:Mn shows a wide‐color gamut, which covers the hole NTSC triangle. The use of K₂SiF₆:Mn enables to realize not only a wider color gamut but also a higher brightness of displays, compared with the use of CaAlSiN₃:Eu. Furthermore, it is confirmed that the white LED using sharp β‐sialon:Eu and K₂SiF₆:Mn is stable against temperature and also durable under the accelerated drive conditions.